Development of pulsed field magnetometer with flexible structure
Source abstract
Abstract
Abstract Aiming at the shortcomings of the existing pulsed field magnetometer (PFM), e.g., the complex structure and high cost, a new PFM with flexible structure is proposed. The pulsed magnet is designed as a dual-coil structure. By adjusting the combined state of the switchgears in the power supply, the maximum magnetic fields of 10 T with pulse durations of 6.52 ms, 12.78 ms and 46.56 ms can be produced. The energy used for the magnetic field generation is stored on the 2.56 mF capacitor bank with the charging voltage being selectable between 0 and 3 kV. The magnetization is recorded by a 16 bit 250 kS/s data acquisition (DAQ) device. For the system control and data process, a LabVIEW program is developed. The effect of the eddy current on the conductive sample is corrected by using the finite difference method (FDM). The hysteresis of NdFeB sample is measured, and the results show that the PFM has excellent measurement performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Field Sensors Techniques · Magnetic Properties of Alloys · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Coercivity enhancement of sintered Ce-substituted Nd-Fe-B magnets by grain boundary diffusion process of Tb10.1016/j.jmmm.2020.167274 ↗
2. Coercivity enhancement of thicker sintered NdFeB magnets by grain boundary diffusion with low-melting Tb75−xCexCu25 (x = 0–45) alloys10.1016/j.jmmm.2020.167287 ↗
3. Preparation and characterization of NdFeB/PrCo5 nanocomposite magnetic materials10.1007/s10948-018-4747-z ↗
4. Coercivity and its thermal stability of Nd–Fe–B hot-deformed magnets enhanced by the eutectic grain boundary diffusion process10.1016/j.actamat.2018.09.018 ↗
5. Overview of the ways for enhancing the coercivity of hot-deformed Nd2Fe14B-type magnets10.1109/TMAG.2018.2814626 ↗
6. Structural and magnetic engineering of (Nd, Pr, Dy, Tb)–Fe–B sintered magnets with Tb3Co0.6Cu0.4Hx composition in the powder mixture10.1016/j.jmmm.2019.166220 ↗
7. Recent progress of grain boundary diffusion process of Nd-Fe-B magnets10.1016/j.jmmm.2020.167227 ↗
8. Electronic structure and magnetic properties of the Fe16N2 doped with Ti10.1016/j.jmmm.2016.06.083 ↗
9. Pulsed field magnetometer for industrial use10.1109/TMAG.2002.803600 ↗
10. Structural analysis of pulsed magnets considering interface characteristics10.1063/5.0009004 ↗
11. A repetitive high current pulse generator for high flux electrothermal plasma jets10.1063/5.0015146 ↗
12. DC–DC converter implementation with wide output voltage operation10.1007/s43236-020-00037-3 ↗
13. Evolutionary design automation of high efficiency series resonant converter for photovoltaic systems10.1109/TPEL.2020.2987086 ↗
14. A hybrid modulation method for single-stage soft-switching inverter based on series resonant converter10.1109/TPEL.2019.2948122 ↗
15. A novel electrochemical anodization cell for the synthesis of mesoporous silicon10.1063/5.0008536 ↗
16. A novel eddy current speed sensor with a ferrite E-core10.1109/LMAG.2020.2993501 ↗
17. Scanning magnetic microscope based on magnetoimpedance sensor for measuring of local magnetic fields10.1016/j.jmmm.2020.166938 ↗
18. Time-domain modeling analysis of pulsed eddy current testing on ferromagnetic casing10.1063/5.0015264 ↗
19. Sensitive AC hysteresigraph of extended driving field capability10.1109/TIM.2019.2917237 ↗
20. Demagnetizing factors for cylinders10.1109/20.102932 ↗
21. Fluxmetric and magnetometric demagnetizing factors for cylinders10.1016/j.jmmm.2006.02.235 ↗
22. The influence of the magnetic viscosity on pulsed field measurements
23. Measuring the hysteresis loop of permanent magnets with the pulsed field magnetometer10.1109/TMAG.2007.893536 ↗