Resonantly enhanced strip-line technique to measure microwave permeability of thin films

Abstract The sensitivity of a reflective single-port strip-line technique is increased by 10–20 times by amplification of a measured reflectivity response at a set of resonance frequencies. The resonant behavior is organized by connecting the strip cell to a network analyzer through a capacitor with a long coaxial cable. The capacitance defines the amplification; the cable length defines the resonance frequencies. S -parameters of the coaxial-to-strip junction and the field inhomogeneity inside the cell are accounted for by a reference measurement of sample with known constitutive parameters. Two methods for permeability calculation are suggested. The fist method is based on the comparison of Lorentzian parameters of resonance reflectivity curves. The second method is based on numerical solution of Fresnel's equation. The enhancement is essential at low-frequency part of the band, where the cell reflectivity is close to unity and the sensitivity of non-resonant technique is poor. The technique sensitivity is estimated by permeability measurements of Al stripes with different cross-section.