journal article·2022-03-01

Corrosion behavior of Q235 steel in graphene oxide aqueous dispersion

Xiaolin Li, Gang Kong, Jingwen Zhang, Delin Lai, Chunshan Che, Bo Yang, Shuanghong Zhang, Jiayu Gu

Publisher page

Abstract

Abstract Conductive metals can speed up the self-assembly and reduction process of graphene oxide (GO) in liquid media, but there is little available information about the effect of this process on the corrosion rate of metal substrates. The corrosion performance of Q235 steel in GO aqueous solution was studied by comparing the influence of different GO concentrations and immersion times on the corrosion rate of steel. The result found that a GO layer will be formed on the surface of steel when immersing in the GO aqueous dispersion, which has a shielding effect on the diffusion process of ions and electrons, and effectively inhibits the steel corrosion. However, this inhibition effect of GO layer will disappear with the self-reduction of GO, which increasing the defect density and conductivity of the sedimentary layer on steel and thus the corrosion rate of steel will increase with the immersion time and the GO concentration in solution.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Graphene research and applications · Corrosion Behavior and Inhibition · Graphene and Nanomaterials Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Corrosion study of the graphene oxide and reduced graphene oxide-based epoxy coatings10.1088/2053-1591/aa9aac ↗
2. Enhanced room-temperature corrosion of copper in the presence of graphene10.1021/nn402150t ↗
3. Corrosion mechanism of graphene coating with different defect levels10.1016/j.jallcom.2018.10.260 ↗
4. Formation of intercalation path for oxygen through imperfections in graphene on metal substrate: a density functional theory study10.1166/jnn.2016.13631 ↗
5. Improved corrosion resistance of copper coated by graphene10.1016/S1872-5805(19)60008-9 ↗
6. The first-principles calculations to explore the mechanism of oxygen diffusion on vacancy defective graphene in marine environment10.1016/j.apsusc.2020.146585 ↗
7. Oxidative originators of graphene barrier coating grown on surfaces10.1002/cnma.202000269 ↗
8. Antioxidant behaviors of graphene in marine environment: a first-principles simulation10.1016/j.apsusc.2019.143962 ↗
9. The role of graphene loading on the corrosion-promotion activity of graphene/epoxy nanocomposite coatings10.1016/j.compositesb.2019.106916 ↗
10. Corrosion resistance of graphene-reinforced waterborne epoxy coatings10.1016/j.jmst.2015.12.017 ↗
11. Effects of graphene on the corrosion evolution of zinc particles in waterborne epoxy zinc-containing coatings10.1016/j.porgcoat.2019.105531 ↗
12. Inhibition and promotion of electrochemical reactions by graphene in organic coatings10.1039/C5RA12988E ↗
13. The role of graphene loading on the corrosion-promotion activity of graphene/epoxy nanocomposite coatings10.1016/j.compositesb.2019.106916 ↗
14. Electrochemical investigation of graphene on the corrosion of scratched polyurea based organic coating10.1088/2053-1591/ab5d48 ↗
15. Poorly conductive electrochemically reduced graphene oxide films modified with alkyne chains to avoid the corrosion-promoting effect of graphene-based materials on carbon steel10.1016/j.carbon.2020.05.069 ↗
16. Carbocatalysis by graphene-based materials10.1021/cr4007347 ↗
17. Enhanced adsorption of graphene oxide on iron surface induced by functional groups10.1016/j.apsusc.2020.146981 ↗
18. Role of oxygen functionalities of GO in corrosion protection of metallic Fe10.1016/j.carbon.2020.11.029 ↗
19. Reduced graphene oxide: corrosion inhibitor for steel10.1166/jnn.2017.12774 ↗
20. Chemical reduction of graphene oxide: a synthetic chemistry viewpoint10.1039/C3CS60303B ↗
21. Spontaneous reduction and assembly of graphene oxide into three-dimensional graphene network on arbitrary conductive substrates10.1038/srep02065 ↗
22. Investigation of the anticorrosion layer of reinforced steel based on graphene oxide in simulated concrete pore solution with 3 wt% NaCl10.1016/j.jobe.2021.103302 ↗
23. Continuous graphene-like layers formed on copper substrates by graphene oxide self-assembly and reduction, acs applied energy10.1021/acsaem.0c01722 ↗
24. Layer-by-layer assembly of ultrathin composite films from micron-sized graphite oxide sheets and polycations10.1021/cm981085u ↗
25. Preparation of graphitic oxide10.1021/ja01539a017 ↗
26. Processable aqueous dispersions of graphene nanosheets10.1038/nnano.2007.451 ↗
27. Influence of chromium on the flow-accelerated corrosion behavior of low alloy steels in 3.5% NaCl solution10.1016/j.corsci.2017.04.024 ↗
28. Flow dependence of steel corrosion in supercritical CO2 environments with different water concentrations10.1016/j.corsci.2018.02.027 ↗
29. Corrosion behavior and mechanism of 3Cr steel in CO2 environment with various Ca2+ concentration10.1016/j.corsci.2018.03.013 ↗
30. Preparation and characterisation of tin-doped α-FeOOH (goethite)10.1039/b001056l ↗
31. Reactions of nitrite with goethite and surface Fe(II)-goethite complexes10.1016/j.scitotenv.2021.146406 ↗
32. Electrocatalytic reduction of oxygen on reduced graphene oxide/iron oxide (rGO/Fe3O4) composite electrode10.1134/S0036024421040282 ↗
33. Reversible hydrogenation and irreversible epoxidation induced by graphene oxide electrolysis10.1016/j.carbon.2021.02.057 ↗
34. Raman spectroscopy of graphene and graphite: disorder, electron-phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
35. Corrosion protective mechanism of smart graphene-based self-healing coating on carbon steel10.1016/j.corsci.2020.108825 ↗
36. Facile modification of graphene oxide with Lysine for improving anti-corrosion performances of water-borne epoxy coatings10.1016/j.porgcoat.2019.06.046 ↗
37. Zinc-reduced graphene oxide for enhanced corrosion protection of zinc-rich epoxy coatings10.1016/j.porgcoat.2018.07.012 ↗
38. Self-alignment of cationic graphene oxide nanosheets for anticorrosive reinforcement of epoxy coatings10.1016/j.cej.2020.124435 ↗
39. A novel approach to fabricate polyacrylate modified graphene oxide for improving the corrosion resistance of epoxy coatings10.1016/j.colsurfa.2020.124627 ↗
40. Macroscopic multifunctional graphene-based hydrogels and aerogels by a metal ion induced self-assembly process10.1021/nn300082k ↗
41. Facile synthesis of graphene nanosheets via fe reduction of exfoliated graphite oxide10.1021/nn102339t ↗
42. Control on the formation of Fe3O4 nanoparticles on chemically reduced graphene oxide surfaces10.1039/C1CE05724C ↗
43. Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials10.1016/j.apsusc.2007.09.063 ↗
44. Graphene as a long-term metal oxidation barrier: worse than nothing10.1021/nn4014356 ↗
45. Review on the corrosion-promotion activity of graphene and its inhibition10.1016/j.jmst.2020.12.084 ↗
46. Tuning the functionalization degree of graphene: Determining critical conditions for inhibiting the corrosion promotion activity of graphene/epoxy nanocomposite coatings10.1016/j.matlet.2019.01.009 ↗
47. Inhibiting the Corrosion-Promotion Activity of Graphene10.1021/cm5043099 ↗
48. Theoretical insights into origin of graphene oxide acidity and relating behavior of oxygen-containing groups in water10.1016/j.carbon.2021.07.026 ↗
49. Ambient fabrication of large-area graphene films via a synchronous reduction and assembly strategy10.1002/adma.201300586 ↗
50. Transformation of graphene oxide by ferrous iron: Environmental implications10.1002/etc.3055 ↗