journal article·2022-06-01

Measurement and optimization of multi-attribute characteristics in milling epoxy granite composites using rsm and combined ahp-topsis

R ArunRamnath, P R Thyla

Publisher page

Abstract

Abstract Epoxy granite composites with its wide range of applications in machine tool industries are manufactured by molding process and require post cast machining operations to meet the desired dimensional accuracy for assembly of machine tool structures. In this research work, milling of epoxy granite composites are carried out based on the experimental design from Response Surface Methodology (RSM) techniques and further the optimal solutions are determined by a novel hybrid algorithm AHP-TOPSIS. Central Composite Design (CCD) model is applied with three factors-three levels and the measured output responses are thrust force, tangential force and surface roughness. Experimental combinations of 20 different trials are performed using high speed steel end mill cutter of diameter 10 mm with three levels of input parameters: speed; fibre content and feed rate at a uniform depth of cut. The relative importance matrix formulated proved to be highly consistent with its consistency ratio to a maximum of 0.000641 which lies below the higher range of 0.1. Consistency ratio of 0.000641 reveals that the optimal solutions determined will be highly reliable and the decision making is much more judicious. Optimal solution determined from hybrid AHP-TOPSIS methods are: speed 1800 rpm; feed rate 0.03 m min −1 and 0% percent fibre content. Functional relationships among parameters and responses established by RSM are consistent upto 95% and its significance is tested by analysis of variance. Comparison among predicted and experimental values of three measured responses convey that the percentage variations are minimum with up to 2.03% for surface roughness, 2.50% for thrust force and 2.71% for tangential force components. This research work provides a systematic procedure and clear framework for determination of optimal machining conditions by hybrid methodology on the basis of technique for order preference by similarity to ideal solution (TOPSIS) combined with analytical hierarchy procedure (AHP) for attribute weights and further analyzes the influence of machining parameters over measured responses.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Manufacturing Process and Optimization · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Experimental and theoretical research on drilling epoxy granite using coated and uncoated carbide spiral drill bits10.1016/j.ijmecsci.2017.11.025 ↗
2. Optimization of machining parameters of composites using multi-attribute decision-making techniques: a review10.1177/0731684417732840 ↗
3. Multi-attribute optimization of end milling epoxy granite composites using TOPSIS10.1080/10426914.2019.1566960 ↗
4. Machining parameter selection in milling epoxy granite composites based on AHP10.1016/j.matpr.2020.09.340 ↗
5. Acoustical analysis and drilling process optimization of camellia sinensis / ananas comosus / GFRP / epoxy composites by TOPSIS for indoor applications10.1080/15440478.2020.1726240 ↗
6. Measurement and optimization of surface roughness and tool wear via grey relational analysis, TOPSIS and RSA techniques10.1016/j.measurement.2015.09.036 ↗
7. Evaluating flexible manufacturing systems using a combined multiple attribute decision making method10.1080/00207540601011519 ↗
8. A combined TOPSIS-AHP-method-based approach for non-traditional machining processes selection10.1243/09544054JEM1238 ↗
9. A note on ‘selection of cutting parameters in side milling operation using graph theory and matrix approach10.1007/s00170-011-3762-z ↗
10. Multi-attribute optimization of machining process parameters in powder mixed electro-discharge machining using TOPSIS and grey relational analysis10.1016/j.jestch.2015.07.010 ↗
11. Selection of machining parameters in face milling operation for copper work piece material using response surface methodology and genetic algorithm
12. A review on optimization of machining parameters for surface roughness and material removal rate for SS 316 in CNC end milling process
13. Machining parameters selection for milling operations using shuffled frog-leaping algorithm
14. Decision-making framework models for material selection using a combined multiple attribute decision-making method10.1007/s00170-006-0752-7 ↗
15. A note on selection of cutting parameters in side milling operation using graph theory and matrix approach10.1007/s00170-011-3762-z ↗
16. Multiresponse optimization of mechanical properties in self-healing glass fiber reinforced plastic using grey relational analysis10.1016/j.measurement.2017.07.013 ↗
17. A decision support system for the selection of a rapid prototyping process using the modified TOPSIS method10.1007/s00170-004-2099-2 ↗
18. Optimization of multiple responsesusing principal component analysis and technique for order preference by similarity to idealsolution10.1007/s00170-004-2157-9 ↗
19. Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method10.1016/j.measurement.2013.11.037 ↗
20. Solving a multiresponse simulation-optimization problem withdiscrete variables using a multiple-attribute decision –making method10.1016/j.matcom.2004.09.004 ↗
21. Hwang · 1981
22. Application ofgrey fuzzy logic for the optimization of drilling parameters for CFRP composites withmultiple performance characteristics10.1016/j.measurement.2012.01.008 ↗
23. Design optimization of cutting parameters for turning operations based on Taguchi method10.1016/S0924-0136(98)00079-X ↗
24. Myers · 2002
25. Effects of porous carrier size on biofilm development, microbial distribution and nitrogen removal in microaerobic bioreactors10.1016/j.biortech.2017.03.076 ↗
26. Role of HRT in biological treatment of combined industrial and municipal wastewater
27. Modeling and optimization in tribological parameters of polyether ether ketone matrix composites using D-optimal design10.1177/0892705713518790 ↗
28. Modeling for prediction of surface roughness in drilling MDF panels using response surface methodology10.1177/0021998310385026 ↗
29. Prediction of cutting force, tool wear and surface roughness of Al6061/SiC composite for end milling operations using RSM10.1007/s12206-013-0729-z ↗
30. Influence of cutting speed and tool wear on the surface integrity of the titanium alloy Ti-1023 during milling10.1007/s00170-014-6593-x ↗
31. Developing a surface roughness model for end-milling of micro-channel10.1080/10910344.2014.897846 ↗
32. Optimization of machining parameters on temperature rise in end milling of Al 6063 using response surface methodology and genetic algorithm10.1007/s00170-012-4652-8 ↗
33. Optimization and sensitivity analysis of geometrical and process parameters to reduce vibration during end milling process10.1080/10910344.2017.1284564 ↗
34. Modeling of geometrical and machining parameters on temperature rise while machining Al 6351 using response surface methodology and genetic algorithm10.1007/s40430-015-0378-5 ↗
35. Optimization of delamination factor in drilling GFR–polypropylene composites10.1080/10426914.2016.1151038 ↗
36. Investigation of hole quality in rotary ultrasonic drilling of borosilicate glass using RSM10.1007/s40430-018-1524-7 ↗
37. Experimental study on electrical discharge machining of inconel using RSM and NSGA optimization technique10.1007/s40430-018-1526-5 ↗
38. Myers · 1995
39. Synergic adsorption-biodegradation by an advanced carrier for enhanced removal of high-strength nitrogen and refractory organics10.1021/acsami.7b01251 ↗