Reinforcing and toughening blends of recycled acrylonitrile-butadiene-styrene/recycled high-impact polystyrene through ionic crosslinking
Source abstract
Abstract
Abstract With the increasing attention to environmental pollution, the recycling and modification of wasted plastics has attracted more and more attention. In this study, zinc dimethacrylate (ZDMA) was first used to introduce ionic crosslinking into recycled acrylonitrile-butadiene-styrene (rABS)/recycled high-impact polystyrene (rHIPS) blends. On one hand, ZDMA underwent self-polymerization to form poly-ZDMA (PZDMA) particles. On the other hand, ionic crosslinks were formed by grafting with butadiene on the rABS or rHIPS chains of ZDMA. The ionic interaction between Zn2+ and unsaturated carboxylate was used to improve the compatibility between rABS and rHIPS. The enhanced impact strength, tensile strength, storage modulus and loss modulus of the blends were observed. In the case of 4 wt% ZDMA, the notched impact strength was 8.71 kJ/m2, 133% higher than that of blends without ZDMA. Scanning electron microscope (SEM) showed that polybutadiene (PB) had a good dispersion in rABS/rHIPS blends, the interface between rABS and rHIPS was indistinct, suggesting good compatibility. This indicated that the compatibility of rABS/rHIPS blends can be improved by using ion crosslinking.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and Waste Management Techniques · Polymer crystallization and properties · Microplastics and Plastic Pollution
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Enhancing interfacial performance of epoxy resin composites via in-situ nucleophilic addition polymerization modification of carbon fibers with hyperbranched polyimidazole10.1016/j.compscitech.2020.108522 ↗
2. Microencapsulation of poorly water-soluble finasteride in polyvinyl alcohol/chitosan microspheres as a long-term sustained release system for potential embolization applications
3. Tuning polyaniline nanostructures via end group substitutions and their morphology dependent electrochemical performances10.1016/j.polymer.2018.09.051 ↗
4. Solid polyaniline dendrites consisting of high aspect ratio branches self-assembled using sodium lauryl sulfonate as soft templates: synthesis and electrochemical performance10.1016/j.polymer.2019.121808 ↗
5. Synergistic effect of P[MPEGMA-IL] modified graphene on morphology and dielectric properties of PLA/PCL blends
6. Phase Morphology, rheological behavior, and mechanical properties of poly (lactic acid)/poly (butylene succinate)/hexamethylene diisocyanate reactive blends
7. Effect of ethylene-butylacrylate-glycidyl methacrylate on compatibility properties of poly (butylene terephthalate)/thermoplastic polyurethane blends
8. Dynamic oscillatory rheological properties of polystyrene/poly(methyl methacrylate) blends and their composites in the presence of carbon black
9. Spatial decoupling of light absorption and scattering centers in Plasmon-assisted bubble column evaporator for solar steam generation
10. Process window for direct recycling of acrylonitrile-butadiene-styrene and high-impact polystyrene from electrical and electronic equipment waste10.1016/j.wasman.2016.10.021 ↗
11. Zinc dimethacrylate-reinforced thermoplastic vulcanizates based on ethylene-vinyl acetate copolymer/chlorinated polyethylene rubber/nitrile butadiene rubber blends10.1080/03602559.2012.762666 ↗
12. Research progress for plastic waste management and manufacture of value-added products10.1007/s42114-020-00190-0 ↗
13. Morphology-dependent electrochemical supercapacitors in multi-dimensional polyaniline nanostructures10.1039/C7TA03279J ↗
14. Effect of ethylene-butylacrylate-glycidyl methacrylate on compatibility properties of poly (butylene terephthalate)/thermoplastic polyurethane blends
15. Research progress on catalytic pyrolysis and reuse of waste plastics and petroleum sludge
16. Achieving high value utilization of bio-oil from lignin targeting for advanced lubrication
17. Preparation of polyaniline nanorods/manganese dioxide nanoflowers core/shell nanostructure and investigation of electrochemical performances10.1007/s42114-021-00225-0 ↗
18. Compatibilization strategies for recycling applications of high impact polystyrene/acrylonitrile butadiene blends10.1007/s10924-016-0869-1 ↗
19. Chain extension, phase interface reparation and mechanical property of recycled acrylonitrile-butadiene-styrene by epoxidized styrene-butadiene-styrene10.1002/mame.202000284 ↗
20. Synergistic effect of P[MPEGMA-IL] modified graphene on morphology and dielectric properties of PLA/PCL blends
21. Valorization of cement kiln dust in activation and production of hybrid geopolymer composites with durable characteristics10.1007/s42114-019-00097-5 ↗
22. Synthesis and nonlinear optical properties of vanadium-doped plasticized epoxy polymer composites10.1007/s42114-021-00227-y ↗
23. Three-dimensional core-shell Fe3O4/Polyaniline coaxial heterogeneous nanonets: preparation and high performance supercapacitor electrodes10.1016/j.electacta.2019.05.073 ↗
24. Compatibilization of HIPS/ABS blends from WEEE by using styrene-butadiene rubber (SBR)10.1016/j.jenvman.2018.03.124 ↗
25. ABS/HIPS blends obtained from WEEE: influence of processing conditions and composition10.1002/app.43831 ↗
26. Recycling of mixed plastic waste from electrical and electronic equipment. Added value by compatibilization10.1016/j.wasman.2016.04.022 ↗
27. Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling10.1016/j.wasman.2012.02.010 ↗
28. Characterizing plastics originating from WEEE: a case study in France10.1016/j.mineng.2014.12.034 ↗
29. Mechanical recycling: compatibilization of mixed thermoplastic wastes10.1016/j.polymdegradstab.2017.11.001 ↗
30. Preparation and characterization of sodium silicate–treated jute-cotton blended polymer–reinforced UPR-based composite: effect of γ-radiation10.1007/s42114-020-00162-4 ↗
31. Investigation of alumina nanofiller impact on the structural and dielectric properties of PEO/PMMA blend matrix-based polymer nanocomposites10.1007/s42114-019-00078-8 ↗
32. Study of the physico-chemical properties of recycled polymers from waste electrical and electronic equipment (WEEE) sorted by high resolution near infrared devices10.1016/j.resconrec.2013.07.006 ↗
33. Mechanical recycling of waste electric and electronic equipment: a review10.1016/S0304-3894(03)00061-X ↗
34. Influence of styrene–ethylene–butylene–styrene on the properties of acrylonitrile butadiene styrene–high-impact polystyrene blends10.1177/0095244313516886 ↗
35. Design of self-healing rubber by introducing ionic interaction to construct a network composed of ionic and covalent cross-linking10.1021/acs.iecr.9b02972 ↗
36. Study on mechanical properties of elastomers reinforced by zinc dimethacrylate10.1016/j.eurpolymj.2004.10.012 ↗
37. Zinc Dimethacrylate induced in situ interfacial compatibilization turns EPDM/PP TPVs into a shape memory material10.1021/acs.iecr.6b00612 ↗
38. Improved understanding of in-situ polymerization of zinc dimethacrylate: the solid bulk polymerization10.1016/j.polymer.2012.01.056 ↗
39. Reinforcement of EPDM by in situ prepared zinc dimethacrylate10.1002/app.10112 ↗
40. Cure kinetics and morphology of natural rubber reinforced by the in situ polymerization of zinc dimethacrylate10.1002/app.31045 ↗
41. Design of self-healing supramolecular rubbers by introducing ionic cross-links into natural rubber via a controlled vulcanization10.1021/acsami.6b05941 ↗
42. Self-repairing systems based on ionomers and epoxidized natural rubber blends10.1021/am201417h ↗
43. Study of the crosslinking evolution of styrene-butadiene rubber/zinc dimethacrylate based on dissolution/swelling experiments10.1080/00222348.2012.700244 ↗
44. A study on the crosslink network evolution of nitrile butadiene rubber reinforced by in situ zinc dimethacrylate10.1002/pc.21239 ↗
45. Temperature dependence of the mechanical properties and the inner structures of natural rubber reinforced by in situ polymerization of zinc dimethacrylate10.1002/app.38263 ↗
46. Peroxide dynamic crosslinking in impact modification of polypropylene with polybutadiene10.1016/j.polymertesting.2016.10.033 ↗
47. Crosslink network evolution of nature rubber/zinc dimethacrylate composite during peroxide vulcanization10.1002/pc.21179 ↗
48. Autonomic self-healing in epoxidized natural rubber10.1021/am303015e ↗
49. Network evolution based on general-purpose diene rubbers/sulfur/TBBS system during vulcanization (I)10.1016/j.polymer.2009.10.057 ↗
50. Specific nonlinear viscoelasticity behaviors of natural rubber and zinc dimethacrylate composites due to multi-crosslinking bond interaction by using rubber process analyzer 200010.1002/pc.21195 ↗
51. Crosslinked bicontinuous biobased PLA/NR blends via dynamic vulcanization using different curing systems10.1016/j.carbpol.2014.07.044 ↗
52. Design of "Zn2+ salt-bondings" crosslinked carboxylated styrene butadiene rubber with reprocessing and recycling ability via rearrangements of ionic crosslinkings10.1021/acssuschemeng.6b01897 ↗
53. A comparison between the SBR vulcanizates reinforced by magnesium methacrylate added directly or prepared in situ10.1016/S0014-3057(02)00171-4 ↗
54. Stress-strain behaviors and crosslinked networks studies of natural rubber-zinc dimethacrylate composites10.1080/00222348.2011.629904 ↗
55. Structure, morphology, and mechanical properties of polysiloxane elastomer composites prepared by in situ polymerization of zinc dimethacrylate10.3144/expresspolymlett.2012.94 ↗
56. In situ reactive compatibilized polypropylene/nitrile butadiene rubber blends by zinc dimethacrylate: preparation, structure, and properties10.1002/pen.23789 ↗
57. Improved mechanical properties and special reinforcement mechanism of natural rubber reinforced by in situ polymerization of zinc dimethacrylate
58. Acrylonitrile-butadiene-styrene nanocomposites filled with nanosized alumina10.1002/pc.20387 ↗
59. Study of the viscoelastic properties of PC/ABS blend containing triphenyl phosphate and nanoclay and its correlation with morphology10.1002/app.32544 ↗
60. Role of multiwalled carbon nanotubes (MWCNTs) on rheological, thermal and electrical properties of PC/ABS blend10.1039/C5RA04043D ↗
61. Improved properties of recycled polypropylene by introducing the long chain branched structure through reactive extrusion10.1016/j.wasman.2018.03.040 ↗
62. Preparation of polystyrene-b-poly(ethylene/propylene)-b-polystyrene grafted glycidyl methacrylate and its compatibility with recycled polypropylene/recycled high impact polystyrene blends10.1016/j.polymer.2018.05.017 ↗
63. Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition10.1126/sciadv.abf3039 ↗
64. From classical thermodynamics to phase-field method
65. Fabrication and characterization of an ultrasensitive humidity sensor based on chalcogenide glassy alloy thin films
66. Reinforced AZ91D magnesium alloy with thixomolding process facilitated dispersion of graphene nanoplatelets and enhanced interfacial interactions10.1016/j.msea.2021.140793 ↗
67. Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process10.1016/j.jmst.2018.12.009 ↗
68. Numerical simulation and optimization of indirect squeeze casting process
69. Rapid solidification of non-stoichiometric intermetallic compounds: modeling and experimental verification10.1016/j.actamat.2018.01.040 ↗
70. Application of the thermodynamic extremal principle to diffusion-controlled phase transformations in Fe-C-X alloys: modeling and applications10.1016/j.actamat.2018.08.008 ↗
71. Steel mesh reinforced Ni(OH)2 nanosheets with enhanced oxygen evolution reaction performance
72. Current research status of interface of ceramic-metal laminated composite material for armor protection
73. Mechanical behavior and fractography of graphite and boron carbide particulates reinforced A356 alloy hybrid metal matrix composites10.1007/s42114-020-00143-7 ↗