A comprehensive review on mechanical and surface characteristics of composites reinforced with coated fibres
Source abstract
Abstract
Abstract Demand for the natural and synthetic fibres are increasing day by day due to the development of high strength composites materials, especially in the production of polymer/ceramic matrix composites. Various types of fibres such as carbon fibres, SiC fibres, polymer fibres and metal fibres were used in the fabrication of composite materials. Despite the strength of the fibres, poor interfacial bonding between the matrix and fibre limits the mechanical strength of the composites. Hence, researches were focused on the application of various surface treatments and coatings on the surface of fibres to augment the interfacial bond/strength of the composites. Researchers improved the fibre properties like adhesion and conductivity through surface coating techniques. So, it is important to review the influence of various surface coatings (polymer, ceramic, metallic and carbon) and chemical treatments on the mechanical strength of the fibres, which could pave the way for the discovery of novel composite materials in the near future. The present article comprehensively reviews the various surface coatings and treatments on fibres and its impact on the wettability, phase composition, interfacial bonding, mechanical strength and thermal conductivity. Hence, this review article could be as a reference hub for the researchers working on the coating and treatments on the fibres to augment its surface characteristics further.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Additive Manufacturing and 3D Printing Technologies · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Mechanical performance of fibres in hot mix asphalt: a review10.1016/j.conbuildmat.2018.12.171 ↗
2. A review on plant fibre reinforced thermoset polymers for structural and frictional composites10.1016/j.polymertesting.2020.106792 ↗
3. Corrosion resistance of steel fibre reinforced concrete - A literature review10.1016/j.cemconres.2017.05.016 ↗
4. Performance of cementitious composites reinforced with chopped basalt fibres – An overview10.1016/j.conbuildmat.2020.120970 ↗
5. E.S. Greenhalgh, Failure analysis and fractography of polymer composites, 2009. https://doi.org/10.1533/9781845696818.10.1201/9781439847510 ↗
6. Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 4. Impact properties10.1016/S1359-835X(96)00127-3 ↗
7. Effect of fibre length on mechanical properties of randomly oriented short jute fibre reinforced epoxy composite
8. Effect of fibre surface coating on the mechanical properties of natural fibre-reinforced soil
9. The effect of alkaline treatment on mechanical properties of kenaf fibres and their epoxy composites10.1016/j.compositesb.2014.08.025 ↗
10. Activation energy and crystallization kinetics of untreated and treated oil palm fibre reinforced phenol formaldehyde composites10.1016/S0921-5093(99)00556-0 ↗
11. A study of the effect of acetylation and propionylation surface treatments on natural fibres10.1016/j.compositesa.2005.01.004 ↗
12. Chemical treatments of natural fibre for use in natural fibre-reinforced composites: a review10.1007/s10924-006-0042-3 ↗
13. Effect of surface treatments on the electrical properties of low-density polyethylene composites reinforced with short sisal fibres10.1016/S0266-3538(96)00109-1 ↗
14. Mercerization treatment parameter effect on coir fibre reinforced polymer matrix composite10.1088/2053-1591/aad034 ↗
15. Mercerization treatment parameter effect on natural fibre reinforced polymer matrix composite: a brief review
16. The influence of chemical surface modification on the performance of sisal-polyester biocomposites10.1002/pc.10422 ↗
17. The EMI shielding effectiveness of PC/ABS/nickel-coated-carbon-fibre composites10.1016/S0014-3057(00)00039-2 ↗
18. Polyamide coated KevlarTM fabric in epoxy resin: mechanical properties and moisture absorption studies10.1016/S1359-835X(99)00101-3 ↗
19. Polyamide coating on carbon fibres and potential application in carbon/kevlar/epoxy hybrid composites10.1016/0266-3538(93)90128-4 ↗
20. Microstructure and properties of monazite (LaPO4) coated saphikon fibre/alumina matrix composites10.1016/S0955-2219(99)00253-8 ↗
21. Corrosion studies on aluminium reinforced with uncoated and coated carbon fibres10.1016/S0266-3538(98)00163-8 ↗
22. High-temperature oxidation behavior of SiC-coated carbon fibre-reinforced carbon matrix composites10.1016/S1359-835X(98)00143-2 ↗
23. Optimum conditions of electroless nickel plating on carbon fibres for EMI shielding effectiveness of ENCF/ABS composites10.1016/S0014-3057(96)00248-0 ↗
24. Wear of aluminium matrix composites reinforced with nickel-coated carbon fibres10.1016/0043-1648(95)06795-7 ↗
25. Wear performance of aluminium alloy composites containing unidirectionally-oriented silicon carbide coated boron fibres10.1016/0043-1648(96)06959-1 ↗
26. Effect of fibre coating on the fracture and fatigue resistance of SCS-6/Ti3Al composites10.1016/0956-7151(94)00471-S ↗
27. A study of fibre coating in Al2O3 fibre-reinforced NiAlFe matrix composites10.1016/0921-5093(95)09846-1 ↗
28. X-ray diffraction and X-ray photoelectron spectroscopy studies of Ni–P deposited onto carbon fibre surfaces: impact properties of a carbon-fibre-reinforced matrix10.1016/S0021-9797(03)00290-X ↗
29. Effects of coatings on the mechanical properties of carbon fibre reinforced HAP composites10.1016/j.matlet.2004.05.086 ↗
30. Electroless nickel coated short carbon fibres in aluminium matrix composites10.1016/j.compositesa.2006.02.010 ↗
31. Effect of copper electroless coatings on the interaction between a molten Al–Si–Mg alloy and coated short carbon fibres10.1016/j.compositesa.2007.02.005 ↗
32. Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites10.1016/j.jmatprotec.2008.05.002 ↗
33. Effect of reinforcement coatings on the dry sliding wear behaviour of aluminium/SiC particles/carbon fibres hybrid composites10.1016/j.wear.2009.03.016 ↗
34. Interface characteristics and mechanical properties of short carbon fibres/Al composites with different coatings10.1016/j.apsusc.2008.10.124 ↗
35. The effect of applied pressure on fracture surface and tensile properties of nickel coated continuous carbon fibre reinforced aluminum composites fabricated by squeeze casting10.1016/j.matdes.2009.11.067 ↗
36. Enhancement of the oxidation resistance of interfacial area in C/C composites. Part II: oxidation resistance of B–C, Si–B–C and Si–C coated carbon preforms densified with carbon10.1016/S0955-2219(01)00411-3 ↗
37. The damping capacity of aluminum matrix composites reinforced with coated carbon fibres10.1016/j.matlet.2004.05.066 ↗
38. Interfacial compatibility of C/Au-coated SiTiCO fibre-reinforced Ti matrix composite10.1016/S1359-6462(03)00243-4 ↗
39. Effect of a BN interlayer on the tensile strength of NiAl coated sapphire fibres10.1016/j.scriptamat.2006.04.011 ↗
40. Influence of BN fibre coatings on the interfacial structure of sapphire fibre reinforced NiAl composites10.1016/S0169-4332(01)00255-0 ↗
41. Synthesis methods of nanostructures10.1016/B978-0-12-821192-2.00003-6 ↗
42. Bioactivity of sol–gel-derived TiO2 coating on polyetheretherketone: in vitro and in vivo studies10.1016/j.actbio.2016.02.007 ↗
43. Chemical vapor deposition/polymerization onto webs10.1016/B978-0-323-29644-1.00018-9 ↗
44. Deposition mechanism of electroless nickel plating of composite coatings on magnesium alloy10.1016/j.ces.2019.07.048 ↗
45. Fuel cells – proton-exchange membrane fuel cells | membrane–electrode assemblies10.1016/B978-044452745-5.00227-6 ↗
46. The fabrication and characterization of high density polyethylene composites reinforced by carbon nanotube coated carbon fibres10.1016/j.compositesa.2019.03.027 ↗
47. Process optimisation of SiO2 interface coating on carbon fibre by RF PECVD for advanced composites10.1016/j.surfin.2017.07.002 ↗
48. Thermal plasma spray deposition of titanium and hydroxyapatite on polyaryletheretherketone implants10.1016/B978-1-4377-4463-7.10009-0 ↗
49. Experimental investigation on graphene oxides coated carbon fibre/epoxy hybrid composites: mechanical and electrical properties10.1016/j.compscitech.2019.04.034 ↗
50. Effect of carbon nanotube length and density on the properties of carbon nanotube-coated carbon fibre/polyester composites10.1016/j.carbon.2011.03.032 ↗
51. Fabrication and properties of W–20Cu alloy reinforced by titanium coated carbon fibres10.1016/j.msea.2011.08.028 ↗
52. Evolution of interfacial nanostructures and stress states in Mg matrix composites reinforced with coated continuous carbon fibres10.1016/j.compscitech.2011.10.008 ↗
53. Tensile strength, oxidation resistance and wettability of carbon fibres coated with a TiC layer using a molten salt method10.1016/j.matdes.2013.02.084 ↗
54. Preparation and characterization of CVD-TiN-coated carbon fibres for applications in metal matrix composites10.1016/j.tsf.2015.06.022 ↗
55. Influence of graphene oxide coatings on carbon fibre by ultrasonically assisted electrophoretic deposition on its composite interfacial property10.1016/j.surfcoat.2015.04.008 ↗
56. Enhanced oxidation resistance of carbon fibre reinforced lithium aluminosilicate composites by boron doping10.1016/j.corsci.2015.07.011 ↗
57. Effect of Al2O3 coating thickness on microstructural characterization and mechanical properties of continuous carbon fibre reinforced aluminum matrix composites10.1016/j.msea.2020.139839 ↗
58. Glass fibres coated with flame synthesised carbon nanotubes to enhance interface properties
59. Investigation of interfacial and mechanical properties of alumina-coated steel fibre reinforced geopolymer composites10.1016/j.conbuildmat.2021.123118 ↗
60. Interface and bonding mechanisms of plant fibre composites: an overview10.1016/j.compositesb.2016.06.055 ↗
61. Production and mechanical characterization of Ni-coated carbon fibres reinforced Al-6063 alloy matrix composites10.1016/j.jallcom.2019.02.043 ↗
62. A review of the research progress on the interface between oxide fibre and oxide ceramic matrix10.1016/j.ceramint.2020.11.039 ↗
63. Fibre-reinforced polymer composites: manufacturing, properties, and applications
64. Electrostatic adhesion of polyaniline on carboxylated polyacrylonitrile fabric for high-performance wearable ammonia sensor
65. T. Yamamoto, K. Uematsu, T. Irisawa, Y. Tanabe, Enhancement of surface adhesion between thermoplastic resin and carbon fibre using polymer colloids, Https://Doi.Org/10.1080/00218464.2016.1189332. 93 (2016) 943–948. https://doi.org/10.1080/00218464.2016.1189332.10.1080/00218464.2016.1189332 ↗
66. Controlling of the interfacial shear strength between thermoplastic resin and carbon fibre by adsorbing polymer particles on carbon fibre using electrophoresis10.1016/j.compositesa.2016.05.021 ↗
67. Electrostatic adhesion for added functionality of composite structures10.1088/0964-1726/25/2/025016 ↗
68. Integrating electrostatic adhesion to composite structures
69. Improving the interfacial shear strength of carbon fibre and epoxy via mechanical interlocking effect10.1016/j.compscitech.2020.108423 ↗
70. Effect of root-like mechanical-interlocking interface in polypropylene /aramid fibre composites from experimental to numerical study10.1016/j.compositesb.2021.108868 ↗
71. Interfacial adhesion of plasma-treated carbon fibre/poly(phthalazinone ether sulfone ketone) composite10.1002/app.26840 ↗
72. Effect of alkali treated jute fibres on composite properties10.1007/BF02710089 ↗
73. Mechanical and water absorption properties of nano TiO2 coated flax fibre epoxy composites10.1016/j.conbuildmat.2021.122803 ↗
74. Wettability assessment of plasma-treated PBO fibres based on thermogravimetric analysis10.1016/j.ijadhadh.2017.01.010 ↗
75. Influence of DBD plasma pretreatment on the deposition of chitosan onto UHMWPE fibre surfaces for improvement of adhesion and dyeing properties10.1016/j.apsusc.2016.11.215 ↗
76. Surface and wettability property analysis of CCF300 carbon fibres with different sizing or without sizing10.1016/j.matdes.2010.08.004 ↗
77. Improved wettability and interfacial adhesion in carbon fibre/epoxy composites via an aqueous epoxy sizing agent10.1016/j.compositesa.2018.06.026 ↗
78. Surface treatment of para-aramid fibre by argon dielectric barrier discharge plasma at atmospheric pressure
79. Interfacial performance of high-performance fibre-reinforced composites improved by cold plasma treatment: a review
80. Improvement and mechanism of interfacial adhesion in PBO fibre/bismaleimide composite by oxygen plasma treatment10.1016/j.apsusc.2011.03.035 ↗
81. Effects of argon plasma treatment on the interfacial adhesion of PBO fibre/bismaleimide composite and aging behaviors10.1016/j.apsusc.2011.07.029 ↗
82. Surface modification of aramid fibres via ammonia-plasma treatment
83. Wettability and interfacial characterization of alkaline treated kenaf fibre-unsaturated polyester composites fabricated by resin transfer molding10.1002/pc.23609 ↗
84. Effect of alkali treatment on wettability and thermal stability of individual bamboo fibres10.1007/s10086-018-1713-0 ↗
85. J. Wang, P. Chen, C. Lu, Q. Yu, W. Li, R. Ren, Improvement of aramid fibre III reinforced bismaleimide composite interfacial adhesion by oxygen plasma treatment, Https://Doi.Org/10.1080/09276440.2018.1439630. 25 (2018) 771–783. https://doi.org/10.1080/09276440.2018.1439630.10.1080/09276440.2018.1439630 ↗
86. Manufacturing and interfacial bonding behavior of plasma-treated-carbon fibre reinforced veneer-based composites10.1016/j.compstruct.2019.111203 ↗
87. Graphene coated fabrics by ultrasonic spray coating for wearable electronics and smart textiles
88. Increasing the interfacial strength in carbon fibre/epoxy composites by controlling the orientation and length of carbon nanotubes grown on the fibres10.1016/j.carbon.2011.06.064 ↗
89. Enhancement of wetting and mechanical properties of UHMWPE-based composites through alumina atomic layer deposition10.1002/admi.201800295 ↗
90. Preparation of highly conductive graphene-coated glass fibres by sol-gel and dip-coating method10.1016/j.jmst.2019.05.027 ↗
91. Ultrahigh-molecular-weight polyethylene (UHMWPE) in joint replacement10.1533/9781845693640.141 ↗
92. Carbon nanotube grafted carbon fibres: a study of wetting and fibre fragmentation10.1016/j.compositesa.2010.04.004 ↗
93. Continuous carbon nanotube synthesis on charged carbon fibres10.1016/j.compositesa.2018.05.027 ↗
94. Surface modification of aramid fibre by plasma induced vapor phase graft polymerization of acrylic acid. I. Influence of plasma conditions10.1016/j.apsusc.2015.05.036 ↗
95. Surface modification of UHMWPE fibres by means of polyethylene wax grafted maleic anhydride treatment10.1002/app.46555 ↗
96. Ecofriendly preparation of cellulose nanocrystal-coated polyimide fibre: strategy for improved wettability10.1021/acs.langmuir.9b01736 ↗
97. Vulcanization of chlorinated polyethylene/chloroprene rubber compounds at lower temperatures in the presence of reactive silanes10.1002/app.50544 ↗
98. Surface treatment of para-aramid fibre by argon dielectric barrier discharge plasma at atmospheric pressure10.1016/j.apsusc.2012.06.100 ↗
99. Effect of adding carbon nanotubes on the thermal conductivity of steel fibre-reinforced concrete10.1016/j.compositesb.2019.106972 ↗
100. Thermal conductivity of a polyethylene filled with disoriented short-cut carbon fibres10.1002/app.1991.070430612 ↗