Fatigue strength of nitrided 18Ni250 and 18Ni300 grade maraging steels
Source abstract
Abstract
An investigation into the nitriding of maraging steels 18Ni250 and 18Ni300 has been conducted. Preliminary investigations of the nitriding parameters were carried out on 18Ni250 grade steel in an atmosphere of partially dissociated ammonia at temperatures within the range 450 to 520°C and for times from 1 to 24 h. Hardness, depth, and microstructural characteristics of the case were determined. The results of preliminary tests served to facilitate the selection of nitriding process parameters for fatigue test specimens. Specimens were nitrided at 470 and 480°C (grade 18Ni250) and 450 and 470°C (grade 18Ni300). An increase of the bending fatigue limit by 45% was noted in comparison with unnitrided specimens. Within the selected range of nitriding parameters, no effect of nitriding on fatigue strength was observed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Aviation Institute, Al. Krakowska 110/114, Warsaw, 02–256, Poland
The Institute of Precision Mechanicsul. Duchnicka 3, Warsaw, 00–967, Poland
References (24)
Show source-provided references
1. KARLINSKE W. · 1996
2. 1994
3. GRAAE A. · Met. Prog · 1967 · 92 · 74
4. TSYRLIN E. S. · Metalloved. Term. Obrab. Met. · 1971 · 22
5. 1982
6. BODYAKO M. N. · 1976 · 113
7. LACHTIN Yu. M. · 1976 · 62
8. INCO Databook · 1976
9. 1990 · 1
10. OZBAYSAL K. · Ind. Heat. · 1990 · 35
11. LACHTIN Yu. M. · Metalloved. Term. Obrab. Met. · 1974 · 8
12. LACHTIN Yu. M. · 1982 · 76
13. NAKONIECZNY A., and TACIKOWSKI J.: Proc. 1st Polish Conf. on Advanced Surfaces Engineering Processes, Lodz Technical University, Poland, 1994, 39–45.
14. SERENSEN S. W · 1985 · 81
15. TROSCENKO V. T. · 1987 · 144
16. HERTZBERG R. W. ‘Deformation and fracture mechanics of engineering materials’, 437; 1976, New York, NY, John Wiley.
17. 10.1007/BF0264606110.1007/BF02646061 ↗
18. 10.1007/BF0266819010.1007/BF02668190 ↗
19. 10.1007/BF0264652210.1007/BF02646522 ↗
20. 1991 · 4
21. PETERS D. T. ‘Source book on maraging steels’, (ed. Decker R. F.), 70–84; 1979, Metals Park, OH, ASM.
22. COLLINS J. A. · 1981 · 365
23. ROAR R. J. ‘Formulas for stress and strain’, 268; 1954, New York, NY, McGraw & Sons.
24. DYLAG Z. · 1962 · 171