Corrosion resistance of pulsed laser modified AZ31 Mg alloy surfaces
Source abstract
Abstract
The effect of laser surface melting on the corrosion resistance of AZ31 Mg alloy in 0.1 M NaCl solution was investigated using different laser processing conditions (energy densities of 14 and 17 J cm−2). Laser treatment induced rough surfaces primarily composed of oxidized species of Mg. XPS analysis revealed that the surface concentration of Al increased significantly as a consequence of LSM. Electrochemical impedance spectroscopy showed that the laser treatment remarkably increased the polarization resistance of the AZ31 Mg alloy and induced a passive-like region of about 100 mV, as determined by potentiodynamic polarization. Analysis of the results obtained provide solid evidence that within the immersion times used in this study, LSM treatment increased the corrosion resistance of AZ31 Mg alloy under open circuit conditions and anodic polarization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. The role of the magnesium industry in protecting the environment10.1016/S0924-0136(01)00779-8 ↗
2. Kumar · 2020
3. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
4. Biodegradable Mg and Mg alloys: corrosion and biocompatibility10.1016/j.mseb.2011.05.028 ↗
5. Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids10.1016/j.actbio.2009.04.041 ↗
6. Laser surface melting of Mg-Zn-Dy alloy for better wettability and corrosion resistance for biodegradable implant applications10.1016/j.apsusc.2019.02.167 ↗
7. Magnesium: industrial and Research Developments Over the Last 15 Years10.5006/1474 ↗
8. Laser surface engineering of magnesium alloys: a review10.1007/s11837-012-0340-2 ↗
9. Selective Laser Melting of Magnesium and Magnesium Alloy Powders: a Review10.3390/met7010002 ↗
10. Effect of excimer laser surface melting on the microstructure and corrosion performance of the die cast AZ91D magnesium alloy10.1016/j.corsci.2009.09.025 ↗
11. An ultrathin melted layer on magnesium alloy manufactured by low power laser10.1088/2053-1591/ab0cbe ↗
12. Effect of laser surface melting on microstructure and corrosion characteristics of AM60B magnesium alloy10.1016/j.apsusc.2015.03.067 ↗
13. Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material10.1007/s10103-017-2174-1 ↗
14. Plasma electrolytic oxidation of AZ31 and AZ91 magnesium alloys: comparison of coatings formation mechanism10.1016/j.jma.2020.06.002 ↗
15. Surface modification of ACM522 magnesium alloy by plasma electrolytic oxidation in phosphate electrolyte10.1016/j.corsci.2011.12.032 ↗
16. Microstructure and corrosion behavior of plasma electrolytic oxidation coated magnesium alloy pre-treated by laser surface melting10.1016/j.surfcoat.2011.12.040 ↗
17. Effect of high current pulsed electron beam treatment on surface microstructure and wear and corrosion resistance of an AZ91HP magnesium alloy10.1016/j.surfcoat.2006.11.036 ↗
18. Corrosion behaviour of laser surface melted magnesium alloy AZ91D10.1016/j.matdes.2013.12.069 ↗
19. Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy10.1016/S0921-5093(03)00519-7 ↗
20. Corrosion behaviour of laser-melted magnesium alloys10.1016/j.apsusc.2005.01.169 ↗
21. Electrochemical investigation of the influence of laser surface melting on the microstructure and corrosion behaviour of ZE41 magnesium alloy – an EIS based study10.1016/j.corsci.2011.01.017 ↗
22. Excimer laser treatment of ZE41 magnesium alloy for corrosion resistance and microhardness improvement10.1016/j.optlaseng.2010.03.009 ↗
23. Characterization and performance of laser melted AZ91D and AM60B10.1016/S0921-5093(00)01414-3 ↗
24. Research advances in magnesium and magnesium alloys worldwide in 202010.1016/j.jma.2021.04.001 ↗
25. Corrosion behavior of electron beam processed AZ91 magnesium alloy10.1016/j.jma.2020.08.012 ↗
26. Surface microstructure modifications and in-vitro corrosion resistance improvement of a WE43 Mg alloy treated by pulsed electron beams10.1016/j.vacuum.2019.109132 ↗
27. Effect of the high current pulsed electron beam treatment on the surface microstructure and corrosion resistance of a Mg-4Sm alloy10.1016/j.jallcom.2017.12.227 ↗
28. Improved corrosion resistance of Mg alloy AZ31B induced by selective evaporation of Mg using large pulsed electron beam irradiation10.1016/j.jmst.2018.12.004 ↗
29. Influence of aluminium enrichment in the near-surface region of commercial twin-roll cast AZ31 alloys on their corrosion behaviour10.1016/j.corsci.2017.04.027 ↗
30. Technical note: syringe cell for electrochemical testing10.5006/2847 ↗
31. Effect of the chemistry and structure of the native oxide surface film on the corrosion properties of commercial AZ31 and AZ61 alloys10.1016/j.apsusc.2011.05.014 ↗
32. Revisiting the electrochemical impedance spectroscopy of magnesium with online inductively coupled plasma atomic emission spectroscopy10.1002/cphc.201402666 ↗
33. Accurate electrochemical measurement of magnesium corrosion rates; a combined impedance, mass-loss and hydrogen collection study10.1016/j.electacta.2013.12.124 ↗
34. Assessing the Corrosion of Commercially Pure Magnesium and Commercial AZ31B by Electrochemical Impedance, Mass-Loss, Hydrogen Collection, and Inductively Coupled Plasma Optical Emission Spectrometry Solution Analysis10.5006/1419 ↗
35. Some new directions in impedance spectroscopy data analysis10.1016/0013-4686(93)80310-V ↗
36. Electrochemical study on the corrosion behaviour of a new low-nickel stainless steel in carbonated alkaline solution in the presence of chlorides10.1016/j.electacta.2014.02.107 ↗
37. 1993
38. A critical review of the application of electrochemical techniques for studying corrosion of Mg and Mg alloys: opportunities and challenges, magnesium alloys-selected issue
39. Understanding the enhanced rates of hydrogen evolution on dissolving magnesium10.1016/j.elecom.2019.106482 ↗
40. Electrochemical polarization: I . A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗
41. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
42. Physical Interpretation of the Warburg Impedance10.5006/1.3293628 ↗
43. Polarization resistance method for determination of instantaneous corrosion rates10.5006/1.3280536 ↗
44. The role of the beta-Mg17Al12 phase on the anomalous hydrogen evolution and anodic dissolution of AZ magnesium alloys10.1016/j.corsci.2019.108384 ↗
45. A comparative corrosion behavior of Mg, AZ31 and AZ91 alloys in 3.5% NaCl solution10.1016/j.jma.2015.02.004 ↗
46. The corrosion behavior of AZ31 alloy in chloride and sulfate media – a comparative study through electrochemical investigations10.1016/j.jma.2018.09.003 ↗