Additive friction stir deposition of AZ31B magnesium alloy
Source abstract
Abstract
The current work explored additive friction stir deposition of AZ31B magnesium alloy with the aid of MELD® technology. AZ31B magnesium bar stock was fed through a hollow friction stir tool rotating at constant velocity of 400 rpm and translating at linear velocity varied from 4.2 to 6.3 mm/s. A single wall consisting of five layers with each layer of 140×40×1 mm3 dimensions was deposited under each processing condition. Microstructure, phase, and crystallographic texture evolutions as a function of additive friction stir deposition parameters were studied with the aid of scanning electron microscopy including electron back scatter diffraction and X-ray diffraction. Both feed material and additively produced samples consisted of the α-Mg phase. The additively produced samples exhibited a refined grain structure compared to the feed material. The feed material appeared to have a weak basal texture, while the additively produced samples experienced a strengthening of this basal texture. The additively produced samples showed a marginally higher hardness compared to the feed material. The current work provided a pathway for solid state additive manufacturing of Mg suitable for structural applications such as automotive components and consumable biomedical implants.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Friction stir welding of AZ31 magnesium alloy rolled sheets: influence of processing parameter10.1016/j.actamat.2008.09.011 ↗
2. Effect of addition of Al & Ca and heat treatment on the cast Mg-6Zn alloy10.4028/www.scientific.net/MSF.765.33 ↗
3. Shrikant · 2014
4. Magnesium and its alloys applications in automotive industry10.1007/s00170-007-1279-2 ↗
5. Effect of second-phase particle size and presence of vibration on AZ91/SiC surface composite layer produced by FSP10.1016/S1003-6326(20)65264-5 ↗
6. Mechanical, wear and corrosion behaviors of AZ91/SiCcomposite layer fabricated by friction stir vibration processing10.1088/2051-672X/ac2176 ↗
7. The art of developing new magnesium alloys for high temperature applications10.4028/www.scientific.net/MSF.419-422.407 ↗
8. Microstructure and surface texture driven improvement in in-vitro response of laser surface processed AZ31b magnesium alloy10.1016/j.jma.2020.11.002 ↗
9. Dahotre · 2016
10. Magnesium alloys development towards the 21st century10.4028/www.scientific.net/MSF.350-351.19 ↗
11. Laser surface engineering of magnesium alloys: a review10.1007/s11837-012-0340-2 ↗
12. Additive manufacturing of magnesium alloys
13. A review of additive manufacturing of magnesium alloys10.1063/1.5044305 ↗
14. In-situ deposition of apatite layer to protect Mg-based composite fabricated via laser additive manufacturing
15. Laser additive manufacturing of biodegradable magnesium alloy WE43: a detailed microstructure analysis10.1016/j.actbio.2019.05.056 ↗
16. The potential of SLM technology for processing magnesium alloys in aerospace industry10.1007/s43452-020-00033-1 ↗
17. Selective laser melting of magnesium and magnesium alloys
18. Wire arc additive manufacturing of AZ31 magnesium alloy: grain refinement by adjusting pulse frequency10.3390/ma9100823 ↗
19. Magnesium alloy 3D printing by wire and arc additive manufacturing (WAAM)10.1557/adv.2018.553 ↗
20. Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy10.1016/j.matdes.2014.09.082 ↗
21. In-vitro bio-corrosion behavior of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites10.1016/j.msec.2020.110632 ↗
22. In-vitro biomineralization and biocompatibility of friction stir additively manufactured AZ31b magnesium alloy-hydroxyapatite composites
23. Angelo · 2008
24. Additive friction stir deposition: a deformation processing route to metal additive manufacturing10.1080/21663831.2020.1847211 ↗
25. Non-beam-based metal additive manufacturing enabled by additive friction stir deposition10.1016/j.scriptamat.2018.03.025 ↗
26. Intro to additive manufacturing for propulsion systems
27. Additive manufacturing in wind energy systems: a review
28. In situ investigation into temperature evolution and heat generation during additive friction stir deposition: a comparative study of cu and al-Mg-Si
29. Processing-structure-property correlation in additive friction stir deposited Ti-6Al-4V alloy from recycled metal chips
30. Tracing plastic deformation path and concurrent grain refinement during additive friction stir deposition10.1016/j.mtla.2021.101159 ↗
31. A perspective on solid-state additive manufacturing of aluminum matrix composites using MELD10.1007/s11665-018-3649-3 ↗
32. Asiatico · 2021
33. Microstructure evolution in aluminum alloy AA 2014 during multi-layer friction deposition10.1016/j.matchar.2013.10.009 ↗
34. Calvert · 2015
35. Pulsed laser surface treatment of magnesium alloy: correlation between thermal model and experimental observations10.1016/j.jmatprotec.2009.02.004 ↗
36. Wear behavior of plasma electrolytic oxidation (PEO) and hybrid coatings of PEO and laser on MRI 230D magnesium alloy10.1016/j.wear.2010.12.013 ↗
37. Improved corrosion and wear resistance of Mg alloys via laser surface modification of Al on AZ31B10.1016/j.surfcoat.2011.10.009 ↗
38. Macro-and microstructural studies of laser-processed WE43 (Mg-Y-Nd) magnesium alloy10.1007/s11663-013-9896-7 ↗
39. Laser surface modification of AZ31B Mg alloy for bio-wettability10.1177/0885328214551156 ↗
40. Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material10.1007/s10103-017-2174-1 ↗
41. Optimization of biocompatibility in a laser surface treated Mg-AZ31B alloy10.1016/j.msec.2019.110028 ↗
42. Laser patterned hydroxyapatite surfaces on AZ31B magnesium alloy for consumable implant applications10.1016/j.mtla.2020.100693 ↗
43. A. S. for TestingMaterials · 2017
44. Analysis of transient temperature and residual thermal stresses in friction stir welding of aluminum alloy 6061-T6 via numerical simulation10.1007/s00170-010-3038-z ↗
45. Experimental and numerical studies of re-stirring and re-heating effects on mechanical properties in friction stir additive manufacturing10.1007/s00170-019-03917-6 ↗
46. Phase-field modeling of nugget zone for a AZ31-Mg-alloy friction stir weld10.1007/s11665-018-3471-y ↗
47. Three-dimensional heat and material flow during friction stir welding of mild steel10.1016/j.actamat.2006.09.009 ↗
48. A model relating tool torque and its associated power and specific energy to rotation and forward speeds during friction stir welding/processing10.1016/j.ijmachtools.2010.09.005 ↗
49. Heat transfer modeling of dissimilar FSW of Al 6061/AZ31 using experimentally measured thermo-physical properties10.1007/s00170-019-04276-y ↗
50. Welding defects at friction stir welding
51. Crystallographic and morphological textures in laser surface modified alumina ceramic10.1063/1.2214365 ↗
52. Deposition, microstructure and properties of texture-controlled CVD α-Al2O3 coatings10.1016/j.ijrmhm.2005.05.004 ↗
53. Relationship between grain size and Zener–Holloman parameter during friction stir processing in AZ31 Mg alloys10.1016/j.scriptamat.2004.05.043 ↗
54. A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites10.1007/s12613-020-1993-4 ↗
55. Defects, microstructure and mechanical behaviour upon multi-pass friction stir processing of magnesium alloy with spiral tool path10.1016/j.cirpj.2020.12.006 ↗
56. Effect of traverse and rotational speeds on microstructure, texture, and mechanical properties of friction stir processed az91 alloy10.1016/j.matchar.2021.111235 ↗
57. Simulation and experimental study of dynamic recrystallization process during friction stir vibration welding of magnesium alloys10.1016/S1003-6326(21)65681-9 ↗
58. Effect of vibration on machining and mechanical properties of AZ91 alloy during FSP: modeling and experiments10.1007/s12289-020-01551-2 ↗
59. High strain rate superplasticity via friction stir processing (FSP): a review10.1016/j.msea.2021.141499 ↗
60. Design and numerical analysis of tool for FSP simulation of magnesium alloys
61. Grain growth kinetics of a fine-grained AZ31 magnesium alloy produced by hot rolling10.1016/j.jallcom.2009.12.049 ↗
62. Self-diffusion in magnesium single crystals10.1007/BF03377790 ↗
63. A model to predict the resulting grain size of friction-stir-processed AZ31 magnesium alloy10.1007/s11665-011-0039-5 ↗
64. Texture evolution during annealing of magnesium AZ31 alloy10.1016/S1359-6462(01)01212-X ↗
65. Surface energy and its anisotropy of hexagonal close-packed metals10.1016/j.susc.2014.08.013 ↗
66. The crystallographic characteristics of fracture in magnesium single crystals10.1016/0001-6160(57)90075-5 ↗
67. The Effects of Forging on the Microstructure and Tensile Properties of Magnesium Alloys AZ31 and ZK60
68. Study of basal and pyramidal slips in Mg-Y alloys using micro-pillar compression10.1080/14786435.2020.1725250 ↗
69. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y10.1016/S1359-6454(01)00297-X ↗
70. Hardening evolution of AZ31B Mg sheet10.1016/j.ijplas.2006.03.005 ↗
71. Additional modes of deformation twinning in magnesium10.1016/0001-6160(57)90074-3 ↗
72. Mechanism of secondary deformation of extruded AZ31 magnesium alloy by viscoplastic self-consistent model10.1155/2020/8791720 ↗
73. Effect of temperature on microstructures, texture and mechanical properties of hot rolled pure Mg sheets10.1016/j.msea.2013.01.036 ↗
74. Facilitating basal slip to increase deformation ability in Mg–Mn–Ce alloy by textural reconstruction using friction stir processing10.1007/s11661-013-1746-3 ↗
75. Improvement of yield stress of friction-stirred Mg–Al–Zn alloys by subsequent compression10.1016/j.scriptamat.2007.01.041 ↗
76. Solid solution strengthening of magnesium single crystals—I alloying behaviour in basal slip10.1016/0001-6160(69)90151-5 ↗
77. Solid solution strengthening of magnesium single crystals—II the effect of solute on the ease of prismatic slip10.1016/0001-6160(69)90152-7 ↗
78. Thermally activated nature of basal and prismatic slip in Mg and its alloys
79. Dynamic recrystallization of a wrought magnesium alloy: grain size and texture maps and their application for mechanical behavior predictions10.1016/j.matdes.2021.109562 ↗
80. Effect of grain size on prismatic slip in Mg–3Al–1Zn alloy10.1016/j.scriptamat.2012.05.017 ↗
81. Room-temperature equal channel angular extrusion of pure magnesium10.1016/j.actamat.2010.01.051 ↗
82. Strains and strain rates during friction stir welding10.1016/j.scriptamat.2009.07.015 ↗
83. Numerical studies on the effect of transverse speed in friction stir welding10.1016/j.matdes.2008.05.029 ↗