Rapid µm ITO Electrode Patterning by Laser-direct Writing Using a Modest Commercial Fibre Laser Scriber
Source abstract
Abstract
This work presented a rapid method for determining indium tin oxide (ITO) ablation threshold.The method relies on the conduction property of the ITO film and measured the resistance changes of an ITO test strip after the laser ablation.The method can rapidly measure the lowest laser fluence that produced the resistance increase of the test strip.The method is simpler compared to the typical method that requires the microscopic measurement of laser ablated spot sizes.We determined the ITO laser ablation parameters for three types of ITO slides and prepared ITO conducting electrodes with width smaller than 10 m.The result demonstrated the effectiveness and flexibility of a modest and inexpensive NIR laser scriber for ITO microelectrode writing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Advanced Surface Polishing Techniques · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.