Laser-Induced Backside Wet Etching Employing Green DPSS Laser and Liquid Metallic Absorber

An indirect laser processing, laser-induced backside wet etching (LIBWE) is one of effective techniques for flexible laser-direct-write (LDW) type micromachining of transparent materials. Micromachining by LIBWE employing a diode-pumped solid state (DPSS) green laser and a galvanometer-based point scanning system was examined with employing organic dye solution and liquid metal as laser-absorbing media. LIBWE using liquid metal absorber showed smaller threshold pulse energies for etching (9.1 J/pulse) than that using organic dye solution (33 J/pulse). Different morphologies of etched surfaces were observed for different laser-absorbing media, indicating different mechanisms involved in the etching processes. The laser-induced dynamic phenomena were investigated by means of transient reflection measurements. The different contribution of direct and indirect actions of laser pulses was indicated for LIBWE employing different laser-absorbing media.