Wear resistance of microsized TiC particles reinforced 4Cr5MoSiV1 steel composites fabricated by laser cladding
Source abstract
Abstract
This work used 4Cr5MoSiV1 steel and titanium carbide (TiC) ceramic powders to fabricate composites by laser cladding. A detailed study was conducted on how the volume percentage, particle size, and geometric shape of the TiC ceramics affect the wear resistance of the composites. Results showed that the transformation of ceramic shape had a more obvious impact on the wear resistance of the composites. Plastic deformation, pits, plowing, and microcutting were included in the wear behavior of composites, while fatigue wear was predominant in the matrix. The composite wear resistance was optimal when the spherical TiC was 70 vol. %, the wear volume was 0.58 of the matrix. Due to spherical TiC, it had excellent grain refinement for the matrix grains and lower hot crack sensitivity, effectively improving the matrix’s wear resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Materials Processing and Die and Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology 1 , Wuhan 430074,
International Department, Harbin Ninth Pre-college 2 , Harbin 150001,
Funding
Equipment Pre-research and Sharing Technology
References (44)
Show source-provided references
1. Interfacial characterization and erosive wear performance of zirconia toughened alumina ceramics particles reinforced high chromium white cast irons composites10.1016/j.triboint.2021.107262 ↗
2. Comparison study of Fe-based matrix composites reinforced with Ti-coated and Mo-coated SiC particles10.1016/j.matchemphys.2017.10.007 ↗
3. Interfacial bonding and wear behavior of macroscopic TiC particulates reinforced iron-based composites fabricated by infiltration casting process10.1016/j.triboint.2024.109991 ↗
4. Influence of Al2O3 content on microstructure and oxidation resistance of glass-ceramic coatings for 06Ni9DR alloy steel10.1016/j.ceramint.2024.09.233 ↗
5. Impact-abrasive wear property of ZrO2 toughened Al2O3 ceramic particles reinforced high manganese steel matrix composites10.1016/j.triboint.2024.109547 ↗
6. Microstructure, mechanical properties and wear resistance of rare earth doped WC/steel matrix composites: Experimental and calculations10.1016/j.ceramint.2022.09.244 ↗
7. Microstructure and mechanical properties of strength-ductility synergetic SiC/ZK60 composites by a pre-dispersion strategy10.1016/j.jallcom.2024.177702 ↗
8. ZTA/high Ni–Cr alloy steel composites prepared by liquid phase sintering10.1016/j.ceramint.2023.12.376 ↗
9. Wettability and interaction mechanism for Ni-modified ZTA particles reinforced iron matrix composites10.1016/j.jallcom.2019.01.342 ↗
10. Effect of WC addition on TiC reinforced Fe matrix composites produced by laser deposition10.1016/j.surfcoat.2022.128185 ↗
11. In-situ laser-fabrication and characterization of TiC-containing Ti–Co composite on pure Ti substrate10.1016/j.jallcom.2009.03.168 ↗
12. Effects of using (Ti, Mo)C particles to reduce the three-body abrasives wear of a low alloy iron10.1016/j.wear.2018.06.008 ↗
13. Effect of TiC particle size on the high-temperature oxidation behavior of TiC reinforced stainless steel10.1016/j.apsusc.2019.02.138 ↗
14. A study on the scratch behavior and two-body abrasion wear resistance of TiC-modified E690 steel cladding10.1016/j.wear.2025.205923 ↗
15. Effect of TiC particles on three-body abrasive wear behaviour of low alloy abrasion-resistant steel10.1016/j.wear.2019.202971 ↗
16. Fabrication of multi-scale TiC and stainless steel composite coatings via circular oscillating laser towards superior wear and corrosion resistance of aluminum alloy10.1016/j.jmst.2023.07.072 ↗
17. Laser deposited TiC/H13 tool steel composite coatings and their erosion resistance10.1016/j.jmatprotec.2006.12.053 ↗
18. Hardness-grain-size relations in ceramics10.1111/j.1151-2916.1994.tb04641.x ↗
19. Study on modification of primary carbides and improvement of properties in H13 steel by CeO2 nanoparticles addition10.1016/j.jmrt.2023.11.188 ↗
20. The influence of Al2O3 particle morphology on the coating formation and dry sliding wear behavior of cold sprayed Al–Al2O3 composites10.1016/j.surfcoat.2015.01.057 ↗
21. Influence of large particle size—up to 1.2 mm—and morphology on wear resistance in NiCrBSi/WC laser cladded composite coatings10.1016/j.surfcoat.2016.12.110 ↗
22. Precipitation behavior of carbides in H13 hot work die steel and its strengthening during tempering10.3390/met7030070 ↗
23. Distribution characteristics and thermal stability of primary carbide in cast Ce-H13 steel10.2355/isijinternational.ISIJINT-2019-364 ↗
24. Effects of rare earth elements on microstructure and mechanical properties of H13 die steel10.3390/met10070918 ↗
25. Effects of in situ NbC on the microstructure and high-temperature friction wear properties of 4Cr5MoSiV1 steel10.1016/j.jmrt.2023.04.221 ↗
26. Effect of TIG remelting on microstructure, corrosion and wear resistance of coating on surface of 4Cr5MoSiV1 (AISI H13)10.1016/j.surfcoat.2020.126547 ↗
27. Improvement of tribological performance of TC11 alloy via formation of a double-layer tribo-layer containing graphene/Fe2O3 nanocomposite10.1016/j.triboint.2017.01.025 ↗
28. Tribological properties of Cu-based composites with S-doped NbSe210.1007/s12598-015-0464-y ↗
29. Impact wear resistance of in-situ TiC particles reinforced Mn18Cr2 steel dual-scale architecture composites10.1016/j.ceramint.2024.04.246 ↗
30. Microstructure and wear resistance of in-situ TiC reinforced AlCoCrFeNi-based coatings by laser cladding10.1016/j.apsusc.2022.152703 ↗
31. An integrated model of impact-abrasive wear in bainitic steels containing retained austenite10.1016/j.wear.2019.203088 ↗
32. Mechanism-based strain gradient crystal plasticity—I. Theory10.1016/j.jmps.2004.08.008 ↗
33. Geometrically necessary dislocations and strain-gradient plasticity: A few critical issues10.1016/S1359-6462(02)00335-4 ↗
34. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
35. Effect of TiC on the impact abrasive wear resistance of low alloy martensitic steel10.1016/j.triboint.2022.107866 ↗
36. Wear properties of titanium microalloying carbidic austempered ductile iron and refining mechanism of TiC on M3C10.1016/j.wear.2022.204603 ↗
37. Microstructure, wear resistance and electrochemical properties of spherical/non-spherical WC reinforced inconel 625 superalloy by laser melting deposition10.1016/j.jmapro.2021.12.045 ↗
38. Microstructures and properties of Ti/TiC composites fabricated by laser-directed energy deposition10.1016/j.addma.2021.102198 ↗
39. Microstructure and failure modes during scratch testing of laser cladded WC–NiCrBSi coatings with spherical and angular carbides10.1179/1751584X13Y.0000000023 ↗
40. High-mass-proportion TiCp/Ti6Al4V titanium matrix composites prepared by directed energy deposition10.1016/j.addma.2020.101323 ↗
41. Selection of steels suitable for additive layer manufacturing10.1179/0301923314Z.000000000269 ↗
42. Reduction of micro-cracking in nickel superalloys processed by selective laser melting: A fundamental alloy design approach10.1016/j.actamat.2015.04.035 ↗
43. Morphologies, microstructures and properties of TiC particle reinforced Inconel 625 coatings obtained by laser cladding with wire10.1016/j.jallcom.2017.12.298 ↗
44. Effects of Ti and TiC ceramic powder on laser-cladded Ti–6Al–4V in situ intermetallic composite10.1016/j.apsusc.2012.09.114 ↗