Effect of incident laser wavelength on structural and morphological properties of Bi1.6Pb0.4Sr2Ca2Cu3Oy films grown by pulsed laser deposition
Source abstract
Abstract
A Bi1.6Pb0.4Sr2Ca2Cu3Oy superconductor target was obtained by a solid-state reaction at 860 °C by 130 h. Afterward, Bi1.6Pb0.4Sr2Ca2Cu3Oy thin films were grown by pulsed laser deposition at room temperature, from pellets of the synthesized target, on (111) silicon substrates. Bi1.6Pb0.4Sr2Ca2Cu3Oy films were deposited using an Nd:YAG laser with two different incident wavelengths (532 and 1064 nm) and by varying the distance between the target and the substrate: 20, 25, and 30 mm. X-ray diffraction results showed that Bi1.6Pb0.4Sr2Ca2Cu3Oy films were obtained with Bi-2223 and Bi-2212 superconductor phases.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Physics of Superconductivity and Magnetism · Electronic and Structural Properties of Oxides · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Facultad de Química, Materiales-Energía, Universidad Autónoma de Querétaro 1 , 76010 Querétaro, México
Escuela Nacional de Estudios Superiores, Unidad Juriquilla, UNAM 2 , 76230 Querétaro, México
Departamento de Física, Centro Universitario de Ciencias Exactas e Ingenierías, Universidad de Guadalajara 3 , 44430 Jalisco, México
Departamento de Ingeniería Eléctrica, Sección de Estado Sólido, CINVESTAV-IPN 4 , Apdo. Postal 14-740, México CDMX 07360, México
Escuela Superior de Física y Matemáticas del IPN 5 , CDMX 07738, México
Funding
Consejo Nacional de Ciencia y Tecnología · Universidad Autónoma de Querétaro
References (34)
Show source-provided references
1. Characterization of high-temperature superconductor bulks for electrical machine application10.3390/ma14071636 ↗
2. Microstructure and fluctuation-induced conductivity analysis of Bi2Sr2CaCu2O8+δ (Bi-2212) nanowire fabrics10.3390/cryst10110986 ↗
3. Impact of annular yoke geometry on performance of a dynamo-type HTS flux pump10.1109/TASC.2018.2797171 ↗
4. Design comparisons of concentric three-phase HTS cables10.1109/TASC.2019.2897893 ↗
5. Superconducting electrode capacitor based on double-sided YBCO thin film for wireless power transfer applications10.1088/1361-6668/aaebd8 ↗
6. Superconductor electronics: Status and outlook10.1007/s10948-018-4884-4 ↗
7. Digital superconducting electronics design tools-status and roadmap10.1109/TASC.2018.2797253 ↗
8. O. Ortiz Diaz J. Roa-Rojas, D. A. Landínez Téllez, and J. Albino Aguiar, “Evaluation of Sr2YSbO6 as a new substrate for YBa2Cu3O7-δ superconductor thin films,” Mod. Phys. Lett B18, 1035–1042 (2004). 10.1142/S021798490400757810.1142/S0217984904007578 ↗
9. Synthesis and magnetic properties of Bi1.7Pb0.3Sr2Ca2Cu3O10+δ added with nano Y10.1007/s10948-016-3939-7 ↗
10. The influence of re-pelletization and heat treatment on physical, superconducting, magnetic and micro-mechanical properties of bulk BSCCO samples prepared by ammonium nitrate precipitation method10.1016/j.ceramint.2017.08.114 ↗
11. Coexistence of topological edge state and superconductivity in bismuth ultrathin film10.1021/acs.nanolett.7b00365 ↗
12. Evidence for bulk superconductivity in pure bismuth single crystals at ambient pressure10.1126/science.aaf8227 ↗
13. Ultrathin bismuth film on high-temperature cuprate superconductor Bi2Sr2CaCu2O8+δ as a candidate of a topological superconductor10.1021/acsnano.8b04869 ↗
14. Influences of heat treatment on superconducting properties of Bi1.7Pb0.3(nanoTi0.2)Sr2Ca2Cu3O10 + d thin film deposited on different substrates10.1016/j.egypro.2017.07.120 ↗
15. Superconducting Bi1.5Pb0.5Sr2Ca2Cu3Ox ceramics by rapid melt quenching and glass crystallization10.1063/1.346709 ↗
16. Depression of critical temperature due to residual strain induced by PLD deposition on YBa2Cu3O7–δ thin films10.1016/j.matchemphys.2021.124507 ↗
17. Effect of substrate temperature on growth Bi1.6Pb0.4Sr2Ca2Cu2.4 Zn0.6O10 thin films prepared by pulsed laser deposition10.1016/j.egypro.2013.07.101 ↗
18. The effects of the post-annealing time on the growth mechanism of Bi2Sr2Ca1Cu2O8+∂ thin films produced on MgO (100) single crystal substrates by pulsed laser deposition (PLD)10.1016/j.ceramint.2015.12.116 ↗
19. Substrate dependent epitaxy of superconducting niobium nitride thin films grown by pulsed laser deposition10.1016/j.apsusc.2021.149333 ↗
20. The effect of post-annealing on laser-deposited superconducting Bi–Sr–Ca–Cu–O thin films10.1557/JMR.1993.2162 ↗
21. Detection by XRD of hidden defects in epitaxial Bi2Sr2CaCu2O8 thin films grown by PLD10.1016/j.matchemphys.2019.122020 ↗
22. Annealing treatment of Bi (Pb)-Sr-Ca-Cu-O thin films on MgO by pulsed laser deposition10.3923/jas.2009.2190.2193 ↗
23. Stoichiometric transfer of material in the infrared pulsed laser deposition of yttrium doped Bi-2212 films10.1016/j.physc.2011.03.010 ↗
24. Preparation, characterization and superconducting properties of Bi-Sr-Ca-Cu-O thin films10.1063/1.5113333 ↗
25. Synthesis and characterization of Ag nanoparticles addition on BPSCCO superconducting thin films10.4236/anp.2016.51009 ↗
26. Preparation of high quality Bi2Sr2CaCu2O8+δ thin films on a MgO substrate by pulsed laser ablation and post-annealing—Recrystallization of films accompanying in-plane rotation of a and b axes10.1016/S0921-4534(00)00385-3 ↗
27. Effect of sintering time on structural, morphological and electrical properties of Sb-doped Bi1.6Pb0.4Sr2Ca2Cu3Oy superconductor10.1016/j.ceramint.2022.02.149 ↗
28. CdTe thin films grown by pulsed laser deposition using powder as target: Effect of substrate temperature10.1016/j.jcrysgro.2013.09.036 ↗
29. Measurement of laser ablation threshold on doped BiSrCaCuO high-temperature superconductors by the pulsed photothermal deflection technique10.1063/1.354762 ↗
30. Spectroscopic characterization of BPSCCO thin films grown by dip-coating technique10.1016/S0921-4534(03)00701-9 ↗
31. A study of the magnetic properties of Bi1.64−x Pb0.36Cdx Sr2Ca2Cu3Oy superconductor10.1007/s10948-010-0899-1 ↗
32. Structural and morphological characterization of YBa2Cu3O7-x films deposited by screen printing from YBa2Cu3O6.962 superconductor in bulk10.1088/2053-1591/abadd0 ↗
33. Primary and secondary mechanisms in laser-pulse sputtering10.1016/0168-583X(92)95033-N ↗
34. Growth kinetics during pulsed laser deposition10.1002/9780470052129.ch8 ↗