journal article·2002-11-01

Use of carbon dioxide (CO2) laser radiation in exposure of implants (stage II): A metallography evaluation in dogs

Márcia Vieira Marcondes Guimarães, Walter Niccoli-Filho, Marco Antonio Bottino, Carlos Schwab

Journal of Laser Applications· Volume 14· Issue 4
Publisher page

Abstract

In this study we analyzed possible damages that vaporization from laser radiation could cause to implant material. Fifteen standard titanium implants, measuring 3.75 mm in diameter by 7 mm in length, were placed into the upper and lower jaws of three dogs according to Brȧnemark’s system. After osseointegration, all implants were exposed. In group I (control) conventional exposure with a punch was used; in group II, a CO2 laser with 2 W (power density: 256 W/cm2; fluency: 0.077 J/cm2, and a pulse mode of 0.30 ms) was used, and in group III 4 W (power density: 512 W/cm2, fluency: 0.154 J/cm2, and a pulse mode of 0.30 ms) was used. After vaporization, the cover screws were removed and sent for metallographic examination. The results showed that cover screws irradiated with 2 and 4 W power caused no superficial or microstructural alteration. The results also showed that the prescribed power densities, fluencies, and the use of the pulse mode were suitable for exposing implants without damage to tissue or implant material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Implant Techniques and Outcomes · Laser Applications in Dentistry and Medicine · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Post Doctor Research Fellow, Department of Prosthesis, Sao Paulo State University–UNESP, School of Dentistry, Sao Jose dos Campos-SP, Brazil

Head of Academic Group of Studies and Research with Laser in Dentistry, Sao Paulo State University–UNESP, School of Dentistry, Sao Jose dos Campos-SP, Brazil

Department of Prosthesis, Sao Paulo State University–UNESP, School of Dentistry, Sao Jose dos Campos-SP, Brazil

Department of Physics at Advanced Studies Institute–IEAv, Lasers Division, Sao Jose dos Campos-SP, Brazil

References (14)

Show source-provided references
1. The long-term efficacy of currently used dental implants: a review and proposed criteria of success
2. Carbon dioxide (CO2) laser radiation in reopening surgeries of osseointegrated implants.
3. Use of the CO2 laser in soft tissue dental surgery10.1002/lsm.1900070213 ↗
4. Effects of helium–neon laser radiation on the healing of extractions wounds: histologic study in rats
5. A comparative histological study of wound healing following CO2 laser and conventional surgical excision of canine buccal mucosa10.1016/0003-9969(83)90069-9 ↗
6. Laser irradiation of bone: II. Healing response following treatment by CO2 and Nd:YAG lasers10.1902/jop.1999.70.1.75 ↗
7. Effects of the Nd:YAG dental laser plasma-sprayed and hydroxyapatite-coated titanium dental implants: Surface alteration and attempted sterilization
8. Evaluation of the safety of the carbon dioxide laser used in conjunction with root form implants: A pilot study10.1016/0022-3913(94)90251-8 ↗
9. Bactericidal efficacy of carbon dioxide laser against bacteria-contaminated titanium implant and subsequent cellular adhesion to irradiated area10.1002/(SICI)1096-9101(1998)23:5<299::AID-LSM10>3.0.CO;2-K ↗
10. CO2 lasers and temperature changes of titanium implants10.1902/jop.1995.66.12.1017 ↗
11. The use of lasers in implantology: An overview
12. Lateral thermal damage along pulsed laser incisions
13. Heat generation in hydroxyapatite-coated implant as a result of CO2 laser application10.1016/S1079-2104(05)80119-2 ↗
14. Temperature increases during surface decontamination of titanium implants using CO2 laser10.1034/j.1600-0501.1999.100107.x ↗