Laser beam analysis in direct metal deposition process
Source abstract
Abstract
The quality of a laser beam profile and its stability play fundamental roles in laser material processing. Beam reflections may dramatically affect the beam quality under certain material processing conditions. In this study, experiments were carried out to examine the variations of the continuous wave CO2 laser beam profile during the direct metal deposition (DMD) process. A pyroelectric-camera-based new industrial laser beam analysis device was installed in the optical line near the laser output coupler. Experimental results are presented with the comparison of beam profiles under different cladding processing conditions, such as the coaxial powder flow cladding, preplaced powder cladding, the remelting process, and the dumping of the raw beam. It was observed that cladding using preplaced powder gives off more reflective energy from the cladding zone which deforms the beam profile and causes great power fluctuation. Laser beam profiles and stability during DMD processes were monitored and analyzed with various processing geometries and the identification of porosity formation. High contents of the oxidized contaminants in the reused H13 powder were found to cause dark discontinuities in single track cladding where obvious beam power fluctuations were observed. In multiple layer cladding, 7%–20% more reflected energy was detected in the first layer deposition than in the successive layers.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center for Laser Aided Intelligent Manufacturing, Department of Mechanical Engineering, The University of Michigan, Ann Arbor, Michigan 48109
Spiricon, Inc., Logan, Utah 84341
II-VI, Inc., Saxonburg, Pennsylvania 16056
References (13)
Show source-provided references
1. 1991
2. Effects of laser specific properties on deep welding
3. 1998 · 44
4. Determining the spot size and Gaussian distribution coefficient of pulsed laser beams using Kapton films10.2351/1.4745318 ↗
5. Direct laser beam diagnostics10.1117/12.43663 ↗
6. Measuring the spatial intensity distribution of high-power focused laser-beams using a rotating-wire type laser-beam analyzer I: Theory, measurement science & technology10.1088/0957-0233/5/12/013 ↗
7. 2003
8. The direct metal deposition of H13 tool steel for 3-D components10.1007/BF02914687 ↗
9. Closed loop direct metal deposition: art to part10.1016/S0143-8166(00)00072-5 ↗
10. 1999 · 435
11. Laser attenuation of the focused powder streams in coaxial laser cladding10.2351/1.521910 ↗
12. Energy redistribution during CO2 laser cladding10.2351/1.1471565 ↗
13. Laser-aided direct metal deposition of three dimensional components