journal article·2020-05-01

20 kW laser welding applied on the international thermonuclear experimental reactor correction coil case welding

Chao Fang, Jijun Xin, Wenhua Dai, Wuxiong Yang, Jing Wei, Yuntao Song

Journal of Laser Applications· Volume 32· Issue 2
Publisher page

Abstract

International thermonuclear experimental reactor correction coil cases are made of heavy, thick, high strength, and high toughness austenitic stainless steel 316LN. The BTCC (bottom and top correction coils) case has the dimension of 2.5 × 7 m2 and cross section of 239.8 × 146.7 mm2, side correction coil case has the dimension of 7.2 × 7.6 m2 and cross section of 147.8 × 168 mm2, and they will be closure welded after winding pack insertion. The 20 mm welding depth, dozens of meter of welding length, strict welding requirements, large size, and complex configuration bring a big challenge to this closure welding work. 20 kW high power laser welding is selected as the main welding method because of the advantage of potential welding deformation control and its penetrating ability and cracking resistance. The welding parameter is developed that can cover the assembly gap from 0 to 0.5 mm with a good welding quality. A special test coupon is designed for the welding procedure qualification, and related tests are carried out to qualify the joint properties of bend, tensile, and impact. Finally, a full-scale BTCC case is welded. After welding, ultrasonic testing confirms that almost all welds satisfy the weld seam quality requirement. The recorded temperatures less than 250° indicate that the temperature induced by welding will not harm the internal winding pack. The dimensional deviation of the inner face is less than 4 mm and also satisfies the tolerance requirement of ±2 mm for the BTCC case.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Plasma Physics, Chinese Academy of Sciences 1 , Hefei, Anhui 230031, China

Anhui Key Laboratory of Special Welding Technology 2 , Huainan, Anhui 232000, China

University of Science and Technology of China 3 Science Island Branch of Graduate School, , Hefei, Anhui 230026, China

Beijing University of Technology 4 Institute of Laser Engineering, , Beijing 100124, China

References (16)

Show source-provided references
1. Overview of the ITER correction coils design10.1109/TASC.2010.2041911 ↗
2. The ITER magnet system10.1109/TASC.2008.921232 ↗
3. Study on the laser welding of case closure weld for ITER correction coil10.1109/TASC.2013.2286681 ↗
4. Research on manufacture and enclosure welding of ITER correction coils cases10.1109/TASC.2011.2177057 ↗
5. High power Nd:YAG laser welding in manufacturing of vacuum vessel of fusion reactor10.1016/S0920-3796(03)00071-1 ↗
6. Narrow gap laser welding for potential nuclear pressure vessel manufacture10.2351/1.4943905 ↗
7. Ultra-narrow-groove laser welding for heavy sections in ITER
8. Microstructure and mechanical properties of ultra-narrow gap laser weld joint of 100 mm-thick SUS304 steel plates10.1016/j.jmatprotec.2018.10.017 ↗
9. Effect of rapid solidification on stainless steel weld metal microstructure and its implications on the Schaeffler diagram10.2172/5957599 ↗
10. The influence of cooling rate on the ferrite content of stainless steel alloys
11. Modern solidification theory applied to welding
12. 2011 · 161
13. Study on autogenous laser welding of 20mm 316LN stainless steel plate with ultra high power fiber laser10.3788/CJL201845.0502007 ↗
14. Laser welding and weld hardness analysis of thick section S355 structure steel10.1016/j.matdes.2011.05.053 ↗
15. Optimization of deep penetration laser welding of thick stainless steel with a 10 kW fiber laser10.1016/j.matdes.2013.06.066 ↗
16. Ultra high power (100 kW) fiber laser welding of steel10.1364/OL.43.004667 ↗