journal article·2019-01-01

Experimental Investigation: New Ductility-Based Force Modification Factor Recommended for Concrete Shear Walls Reinforced with Glass Fiber-Reinforced Polymer Bars

Authors not provided

ACI Structural Journal· Volume 116· Issue 1
Publisher page

Abstract

First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Seismic Performance and Analysis · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. ACI Committee 318, 2014, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 520 pp.
2. ASCE/SEI 41-13, 2013, “Seismic Evaluation and Retrofit of Existing Buildings,” American Society of Civil Engineers, Reston, VA, 518 pp.
3. ASTM D7205/D7205M-06(2011), 2011, “Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars,” ASTM International, West Conshohocken, PA, 13 pp.
4. Canadian Commission on Building and Fire Codes, 2015, “National Building Code of Canada (NBCC),” National Research Council of Canada, Montreal, QC, Canada.
5. Canadian Standards Association, 2014, “Design of Concrete Structures Standard (CSA A23.3-14),” Mississauga, ON, Canada, 240 pp.
6. Canadian Standards Association, 2012, “Design and Construction of Building Components with Fiber-Reinforced Polymers (CSA S806-12),” Mississauga, ON, Canada, 208 pp.
7. Cardenas, A. E.; Hanson, J. M.; Corley, W. G.; and Hognestad, E., 1973, “Design Provisions for Shear Walls,” ACI Journal Proceedings, V. 70, No. 3, pp. 221-230.10.14359/11201 ↗
8. Fintel, M., 1995, “Performance of Buildings with Shear Walls in Earthquakes of the Last Thirty Years,” PCI Journal, V. 40, No. 3, pp. 62-80. doi: 10.15554/pcij.05011995.62.8010.15554/pcij.05011995.62.80 ↗
9. Mady, M.; El-Ragaby, A.; and El-Salakawy, E., 2011, “Seismic Behavior of Beam-Column Joints Reinforced with GFRP Bars and Stirrups,” Journal of Composites for Construction, ASCE, V. 15, No. 6, pp. 875-886. doi: 10.1061/(ASCE)CC.1943-5614.000022010.1061/(ASCE)CC.1943-5614.0000220 ↗
10. Mitchell, D.; Tremblay, R.; Karacabeyli, E.; Paultre, P.; Saatcioglu, M.; and Anderson, D. L., 2003, “Seismic Force Modification Factors for the Proposed 2005 Edition of the National Building Code of Canada,” Canadian Journal of Civil Engineering, V. 30, No. 2, pp. 308-327. doi: 10.1139/l02-11110.1139/l02-111 ↗
11. Mohamed, N.; Farghaly, A. S.; Benmokrane, B.; and Neale, K. W., 2014a, “Experimental Investigation of Concrete Shear Walls Reinforced with Glass Fiber-Reinforced Bars under Lateral Cyclic Loading,” Journal of Composites for Construction, ASCE, V. 18, No. 3, p. A04014001 doi: 10.1061/(ASCE)CC.1943-5614.000039310.1061/(ASCE)CC.1943-5614.0000393 ↗
12. Mohamed, N.; Farghaly, A. S.; Benmokrane, B.; and Neale, K. W., 2014b, “Drift Capacity Design of Shear Walls Reinforced with Glass Fiber-Reinforced Polymer Bars,” ACI Structural Journal, V. 111, No. 6, Nov.-Dec., pp. 1397-1406. doi: 10.14359/5168709910.14359/51687099 ↗
13. Mohamed, N.; Farghaly, A. S.; and Benmokrane, B., 2015, “Seismic Response Modification Factors for GFRP-Reinforced Concrete Shear Walls,” The 11th Canadian Conference on Earthquake Engineering, Canadian Association for Earthquake Engineering (11CCEE), Victoria, BC, Canada, 8 pp.
14. Munoz, W.; Salenikovich, A.; Mohammad, M.; and Quenneville, P., 2008, “Determination of Yield Point and Ductility of Timber Assemblies: in Search for a Harmonised Approach,” Proceedings of Meeting 41 of CIB-W18, St. Andrews, NB, Canada.
15. Park, R., 1989, “Evaluation of Ductility of Structures and Structural Assemblages from Laboratory Testing,” Bulletin of the New Zealand National Society of Earthquake Engineering, V. 2, No. 3, pp. 155-166.10.5459/bnzsee.22.3.155-166 ↗
16. Paulay, T., and Priestley, M. J. N., 1995, Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley and Sons, New York, 735 pp.
17. Saatcioglu, M.; Palermo, D.; Ghobarah, A.; Mitchell, D.; Simpson, R.; Adebar, P.; Tremblay, R.; Ventura, C.; and Hong, H., 2013, “Performance of Reinforced Concrete Buildings during the 27 February 2010 Maule (Chile) Earthquake,” Canadian Journal of Civil Engineering, V. 40, No. 8, pp. 693-710. doi: 10.1139/cjce-2012-024310.1139/cjce-2012-0243 ↗
18. Sharbatdar, M. K., and Saatcioglu, M., 2009, “Seismic Design of FRP Reinforced Concrete Structures,” Asian Journal of Applied Sciences, V. 2, No. 3, pp. 211-222. doi: 10.3923/ajaps.2009.211.22210.3923/ajaps.2009.211.222 ↗
19. Tavassoli, A.; Liu, J.; and Sheikh, S., 2015, “Glass Fiber-Reinforced Polymer-Reinforced Circular Columns under Simulated Seismic Loads,” ACI Structural Journal, V. 112, No. 1, Jan.-Feb., pp. 103-114.10.14359/51687227 ↗
20. Wallace, J. W., and Moehle, J. P., 1992, “Ductility and Detailing Requirements of Bearing Wall Buildings,” Journal of Structural Engineering, ASCE, V. 118, No. 6, pp. 1625-1644. doi: 10.1061/(ASCE)0733-9445(1992)118:6(1625)10.1061/(ASCE)0733-9445(1992)118:6(1625) ↗