Study of laser interaction in water flow confinement at high repetition rate
Source abstract
Abstract
This paper presents a study on the confined interaction with water flow for two successive laser pulses. The dynamic of the renewal of water films after shock produced by the laser is observed using a high speed camera. Pressure produced by the two pulses is measured from rear free surface velocity measurements using a velocimeter interferometry system for any reflector. The results show a threshold delay between the two laser pulses for which laser/target coupling of the second pulse decreases. This depends on the spot diameter, the laser intensity, and flow rate. This threshold can be calculated from the maximum jet diameter and flow rate. At an incident power density of 3 GW/cm2, a spot diameter of 1 mm, and a flow rate of 10 m/s, the maximum repetition rate ensuring target/coupling of successive laser pulses can be 1 kHz. The results open perspective for laser shock peening at high repetition rates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Laser Material Processing Techniques · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Lab. Procédés et Ingéniérie en Mécanique et Matériaux , UMR 8006, ENSAM/CNRS/CNAM, 151 Boulevard de l'Hôpital, 75013 Paris, France
References (19)
Show source-provided references
1. Laser generated stress waves10.1063/1.1653116 ↗
2. Quantitative assessment of laser-induced stress waves generated at confined surfaces10.1063/1.1655536 ↗
3. 2008 · 47710.1007/978-0-387-72344-0_12 ↗
4. 1981 · 675
5. Laser shock processing: a review of the physics and applications10.1007/BF00326477 ↗
6. Residual stress improvement in metal surface by underwater laser irradiation10.1016/S0168-583X(96)00551-4 ↗
7. Physical approach to adhesion testing using laser-driven shock waves10.1088/0022-3727/40/10/019 ↗
8. State-of-the-art laser adhesion test (LASAT)10.1080/10589759.2011.573550 ↗
9. Development of the laser shock wave adhesion test on bonded CFRP composite10.1108/IJSI-10-2013-0032 ↗
10. Physical study of laser-produced plasma in confined geometry10.1063/1.346783 ↗
11. Shock waves from a water-confined laser-generated plasma10.1063/1.366113 ↗
12. Wavelength dependent of laser shock-wave generation in the water-confinement regime10.1063/1.370553 ↗
13. 100-W average-power, high-energy nanosecond fiber amplifier10.1007/s00340-002-1018-1 ↗
14. Overview of the Lucia laser program: Toward 100-joules, nanosecond-pulse, kW averaged power based on ytterbium diode-pumped solid state laser10.1117/12.588341 ↗
15. Laser-delayed double shock-wave generation in water-confinement regime10.2351/1.4906382 ↗
16. Laser interferometer for measuring high velocities of any reflecting surface10.1063/1.1660986 ↗
17. Analysis of laser shock waves and resulting surface deformations in an Al-Cu–Li aluminum alloy10.1088/0022-3727/33/5/305 ↗
18. Experimental determination by PVDF and EMV techniques of shock amplitudes induced by 0.6–3 ns10.1088/0022-3727/33/17/308 ↗
19. Numerical modeling of the transmission of breakdown plasma generated in water during laser shock processing10.1051/epjap:2001202 ↗