Prediction of residual stress and deformation of build part with variation of hatch spacing in direct metal laser sintering of AlSi10Mg built part: Thermo-mechanical modeling
Source abstract
Abstract
Direct metal laser sintering is a metal-based additive manufacturing process used to make components directly from metal powders in a layered fashion. A high-intensity laser beam is used to fuse the metal powders during the scanning of the powder bed. In this process, rapid heating and solidification take place, which lead to thermal stress in the build part that can affect the mechanical properties of the fabricated component. In the present work, a thermo-mechanical model was developed using a finite element approach to study the effect of hatch spacing on residual stress in the AlSi10Mg build part. From the simulation results, it was found that there was a decrease in residual stress in the build part with an increase in hatch spacing. This simulation study will help the manufacturer and the designer to select appropriate hatch spacing for printing the component with minimum residual stress.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Institute of Technical Education and Research, Siksha O Anusandhan (Deemed to be University) , Bhubaneswar, Odisha 751030, India
References (21)
Show source-provided references
1. Computational modeling of heat transfer and sintering behavior during direct metal laser sintering of AlSi10Mg alloy powder10.1016/j.crme.2018.08.006 ↗
2. Sintering of AlSi10Mg particles in direct metal laser sintering process: A molecular dynamics simulation study10.1016/j.matchemphys.2019.121803 ↗
3. Thermal modeling of laser-based additive manufacturing processes within common materials10.1016/j.promfg.2015.09.012 ↗
4. Investigation of consolidation kinetics and microstructure evolution of Al alloys in direct metal laser sintering using phase-field simulation10.1088/1757-899X/338/1/012045 ↗
5. 2018 · 295
6. Modeling and optimization of process parameters for laser powder bed fusion of AlSi10Mg alloy10.1007/s40516-019-00099-7 ↗
7. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites10.1016/j.optlastec.2016.04.009 ↗
8. Thermal conductivity of metal powder bed additive manufacturing10.1016/j.addma.2018.02.002 ↗
9. Effect of hatch spacing on melt pool and As-built quality during selective laser melting of stainless steel modeling and experimental approaches10.3390/ma12010050 ↗
10. Computational modeling of residual stress formation during the electron beam melting process for Inconel 71810.1016/j.addma.2015.03.003 ↗
11. Determination of the effect of scan strategy on residual stress in laser powder bed fusion additive manufacturing10.1016/j.addma.2018.07.001 ↗
12. Numerical modeling of the thermal behavior and residual stress in the direct metal laser sintering process of titanium alloy products10.1016/j.addma.2016.10.005 ↗
13. Thermo-mechanical modeling and validation of stress field during laser powder bed fusion of AlSi10Mg built part10.1016/j.rinp.2019.01.002 ↗
14. Influence of hatch spacing and laser spot overlapping on heat transfer during laser powder bed fusion of aluminum alloy10.2351/7.0000157 ↗
15. Residual stress analysis of thin AlSi10Mg parts produced by laser powder bed fusion10.1080/17452759.2019.1650237 ↗
16. Residual stress in laser powder bed fusion10.1016/B978-0-12-824090-8.00024-X ↗
17. Part scale estimation of residual stress development in laser powder bed fusion additive manufacturing of inconel 71810.1016/j.finel.2021.103528 ↗
18. An approach toward multiscale modeling of direct metal laser sintering process10.1016/j.mprp.2019.01.005 ↗
19. Molten pool behavior and its physical mechanism during selective laser melting of TiC/AlSi10Mg nanocomposites: Simulation and experiments10.1088/0022-3727/48/3/035303 ↗
20. A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing10.1016/j.ijmachtools.2009.07.004 ↗
21. Coupled experimental and computational study of residual stresses in additively manufactured Ti-6Al-4V components10.1016/j.matlet.2018.07.141 ↗