Characterization of titanium nitride–hydroxyapatite on PEEK for dental implants by co-axis target magnetron sputtering
Source abstract
Abstract
Abstract In this work, the bioactive TiN-HA layer has been prepared by reactive DC magnetron sputtering system with co-axis target configuration on the polyetheretherketone (PEEK) bio-inert material. The proper plasma conditions used to deposit TiN-HA film on PEEK were carried out by the optical emission spectroscopy (OES). The relationship between the chemical composition of plasma to sputtering pressure, discharge voltage, duty cycle and the content of nitrogen gas were considered. The plasma emission intensity raised to the maximum level when the N 2 content was 0.6 sccm. The voltage was ranged about 500–700 V for the sputtering pressure at 3–7 mTorr and reduced to below 500 V when the pressure increased to more than 7 mTorr. The clear as-deposited films with high refractive index were observed and found to reduce surface contact angle as much lower as 10°. X-ray photoelectron spectroscopy (XPS) result revealed TiOH was also formed in the deposited film besides TiO 2 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Bone Tissue Engineering Materials · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Preparation and characterization of new titanium based alloys for orthopedic and dental application10.4028/www.scientific.net/AMR.15-17.71 ↗
2. In vitro bioactivity of a biocomposite fabricated from HA and Ti powders by powder metallurgy method10.1016/S0142-9612(01)00419-7 ↗
3. Significance of osteogenic surface coatings on implants to enhance osseointegration under osteoporotic-like conditions
4. Titanium nitride coatings in clinical dentistry10.1016/0300-5712(92)90021-4 ↗
5. Titanium nitride and nitrogen ion implanted coated dental materials10.3390/coatings2030160 ↗
6. Processing and evaluation of bioactive coatings on polymeric implants10.1002/jbm.a.34557 ↗
7. Nano-hydroxyapatite-coated PEEK implants: a pilot study in rabbit bone10.1002/jbm.a.34358 ↗
8. Properties of a titanium nitride coating for dental instruments10.1016/0300-5712(91)90123-G ↗
9. Influence of bias voltage on the tribological properties of titanium nitride films fabricated by dynamic plasma ion implantation/deposition10.1016/S0257-8972(02)00416-4 ↗
10. Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants10.1557/JMR.1998.0015 ↗
11. Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings10.1016/S0142-9612(99)00255-0 ↗
12. Materials science of crystalline bioceramics: a review of basic properties and applications
13. PEEK biomaterials in trauma, orthopedic, and spinal implants10.1016/j.biomaterials.2007.07.013 ↗
14. Polyetheretherketone as a biomaterial for spinal applications10.1016/j.biomaterials.2005.07.011 ↗
15. Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements10.1016/0021-9290(93)90042-D ↗
16. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
17. E-glass fiber reinforced composites in dental applications10.1007/s12633-011-9075-x ↗
18. Determinants of stress shielding: design versus materials versus interface10.1097/00003086-199201000-00020 ↗
19. Effect of stem stiffness and bone stiffness on bone remodeling in cemented total hip replacement10.1016/S0883-5403(99)90118-3 ↗
20. The relationship between stress shielding and bone resorption around total hip stems and the effects of flexible materials10.1097/00003086-199201000-00014 ↗
21. Plasma-surface modification of biomaterials10.1016/S0927-796X(02)00004-9 ↗
22. Improved in vitro and in vivo biocompatibility of dual plasma modified titanium alloy10.1016/j.surfcoat.2012.08.053 ↗
23. Pulsed magnetron sputtering – process overview and applications
24. Titanium-porcelain system Part I: oxidation kinetics for nitrided pure titanium, simulated to porcelain firing process
25. Optimization of plasma parameters for high rate deposition of titanium nitride films as protective coating on bell-metal by reactive sputtering in cylindrical magnetron device10.1016/j.apsusc.2008.03.047 ↗
26. Plasma emission in vacuum arc and rf-discharge plasma sources10.1063/1.1429780 ↗
27. Characterization of an inductively coupled nitrogen-argon plasma by Langmuir probe combined with optical emission spectroscopy10.1063/1.3554706 ↗
28. Surface characterization of hydroxyapatite and related calcium phosphates by XPS and TOF-SIMS10.1021/ac990812h ↗
29. XPS analysis of chitosan–hydroxyapatite biomaterials: from elements to compounds10.1002/sia.5229 ↗
30. Nanomodified peek dental implants: bioactive composites and surface modification—a review10.1155/2015/381759 ↗