journal article·2019-02-01

Effects of femtosecond laser irradiation on the microshear bond strength of sound and demineralized dentin

P. F. Cassimiro-Silva, Francisco de Assis M. G. Rego Filho, Luciana Santos Afonso de Melo, Tereza Januária Costa Dias, Cecília Cruz Falcão, Gabriela Queiroz de Melo Monteiro, Anderson Stevens L. Gomes

Journal of Laser Applications· Volume 31· Issue 1
Publisher page

Abstract

The aim of this in vitro study was to assess the microshear bond strength (μSBS) of an adhesive system in sound (SD) and demineralized dentin (DD) after femtosecond (fs) laser treatment. Twenty specimens of human dentin were randomly divided into two main groups: sound and demineralized dentin (n = 10). In each of them, three different tissue conditions were produced: SD control group, SD etched with two different fluences of an fs laser (11 and 18 J/cm2, SD11 and SD18, respectively), DD control group, and DD irradiated with the same laser parameters (DD11 and DD18). An adhesive system was applied to the dentin surface, and a resin composite was light-cured to bond to the dentin surface. The μSBS was measured, and the fracture analysis was performed using an optical microscope. The data were analyzed using the Mann Whitney test (p < 0.05). Tissue morphology was assessed via 2D and 3D optical coherence tomography images, scanning electron microscopy, and atomic force microscopy. The optimum bond strength was recorded for the SD11 group (16.42 ± 4.63 MPa), and the minimum bond strength was recorded for the DD (8.89 ± 0.99 MPa) group. The Kruskal Wallis test revealed that sample groups were significantly different (p < 0.01). The Mann Whitney test demonstrated statistical differences between DD and all the other groups. The imaging techniques showed the opening of the dentinal tubules and that the bond strength could be related to laser-induced roughness. Femtosecond laser radiation was successfully able to remove smear layers, producing surface alterations that caused higher dentin-resin adhesion.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Erosion and Treatment · Dental materials and restorations · Laser Applications in Dentistry and Medicine

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate Program in Dentistry, Federal University of Pernambuco 1 , Recife, PE 50670-901, Brazil

Institute of Physics, Federal University of Alagoas 2 , Maceió, AL 57072-900, Brazil

Physics Department, Federal University of Pernambuco 3 , Recife, PE 50670-901, Brazil

Faculty of Dentistry, University of Pernambuco 4 , Camaragibe, PE 54753-020, Brazil

Funding

Conselho Nacional de Desenvolvimento Científico e Tecnológico · Ministério da Ciência, Tecnologia e Inovação · Coordenação de Aperfeiçoamento de Pessoal de Nível Superior · Fundação de Amparo à Ciência e Tecnologia do Estado de Pernambuco

References (59)

Show source-provided references
1. The erosion and abrasion-inhibiting effect of TiF(4) and NaF varnishes and solutions on enamel in vitro10.1111/j.1365-263X.2011.01151.x ↗
2. Dental erosion—An overview with emphasis on chemical and histopathological aspects10.1159/000325915 ↗
3. Long-term bonding to eroded dentin requires superficial bur preparation10.1007/s00784-011-0650-8 ↗
4. Impact of erosive conditions on tooth-colored restorative materials10.1016/j.dental.2013.07.017 ↗
5. Permeability and morphology of dentin after erosion induced by acidic drinks10.1902/jop.2003.74.4.428 ↗
6. Effects of toothbrushing on eroded dentine10.1111/j.1600-0722.2007.00466.x ↗
7. Short-pulse Er:YAG laser increases bond strength of composite resin to sound and eroded dentin10.1117/1.JBO.21.4.048001 ↗
8. 2015
9. Evaluation of the shear bond strength of a composite resin in sound, demineralized and hypermineralized bovine dentin after irradiation with Er:YAG and Nd:YAG lasers, employing a self-etching adhesive system10.2351/1.3493489 ↗
10. Influence of Er,Cr:YSGG laser treatment on microtensile bond strength of adhesives to enamel10.2341/07-124 ↗
11. Weakening of dentin from cracks resulting from laser irradiation10.1016/j.dental.2008.10.004 ↗
12. Femtosecond lasers as novel tool in dental surgery10.1016/S0169-4332(02)00402-6 ↗
13. Subpicosecond laser ablation of dental enamel10.1063/1.1495896 ↗
14. Precision ablation of dental enamel using a subpicosecond pulsed laser10.1111/j.1834-7819.2003.tb00036.x ↗
15. Femtosecond laser ablation of enamel10.1117/1.JBO.21.6.065005 ↗
16. Structural modifications induced in dentin by femtosecond laser10.1117/1.JBO.21.12.125007 ↗
17. Ultrashort pulse lasers for hard tissue ablation10.1109/2944.577301 ↗
18. Femtosecond laser for cavity preparation in enamel and dentin: Ablation efficiency related factors10.1038/srep20950 ↗
19. Influence of femtosecond laser treatment on shear bond strength of composite resin bonding to human dentin under simulated pulpal pressure10.1002/jbm.b.31936 ↗
20. Femtosecond laser ablation of dentin and enamel for fast and more precise dental cavity preparation10.1016/j.msec.2018.04.070 ↗
21. Morphological alterations in dentine after mechanical treatment and ultrashort pulse laser irradiation10.1007/s10103-010-0845-2 ↗
22. Femtosecond laser ablation of dentin and enamel: Relationship between laser fluence and ablation efficiency10.1117/1.JBO.20.2.028004 ↗
23. Dental applications10.1007/b96440 ↗
24. Precise ablation of dental hard tissues with ultra-short pulsed lasers. Preliminary exploratory investigation on adequate laser parameters10.1007/s10103-012-1107-2 ↗
25. Influence of external cooling on the femtosecond laser ablation of dentin10.1007/s10103-017-2277-8 ↗
26. Multiphoton imaging of the dentine-enamel junction10.1002/jbio.201200065 ↗
27. Effect of ultrashort laser microstructuring of enamel and dentin surfaces on bond strengths in orthodontics and conservative dentistry10.1515/plm-2012-0017 ↗
28. Ultrashort pulsed laser conditioning of human enamel: In vitro study of the influence of geometrical processing parameters on shear bond strength of orthodontic brackets10.1007/s10103-013-1491-2 ↗
29. Effect of different surface treatments on the bond strength of lithium disilicate ceramic to the zirconia core10.1089/pho.2015.4063 ↗
30. The effect of femtosecond laser treatment on the effectiveness of resin-zirconia adhesive: An in vitro study10.15171/jlms.2016.38 ↗
31. Femtosecond laser settings for optimal bracket bonding to zirconia10.1007/s10103-018-2589-3 ↗
32. Osteoblast cell adhesion on a laser modified zirconia based bioceramic10.1007/s10856-005-2608-3 ↗
33. Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation10.1016/j.apsusc.2015.10.102 ↗
34. Human mesenchymal stem cell behavior on femtosecond laser-textured Ti-6Al-4V surfaces10.2217/nnm.15.19 ↗
35. Femtosecond laser ablation of bovine cortical bone10.1117/1.JBO.17.12.125005 ↗
36. Influence of Er:YAG and Ti:sapphire laser irradiation on the microtensile bond strength of several adhesives to dentin10.1007/s10103-013-1343-0 ↗
37. Comparison of the iodide permeability test, the surface microhardness test, and mineral dissolution of bovine enamel following acid challenge10.1159/000261263 ↗
38. Femtosecond laser ablation of dentin10.1088/0022-3727/45/24/245401 ↗
39. Femtosecond-pulse laser ablation of dental hydroxyapatite and single-crystalline fluorapatite10.1007/s003390051426 ↗
40. Effectiveness of two fluoridation measures on erosion progression in human enamel and dentine in vitro10.1159/000047470 ↗
41. Dentin bonding-variables related to the clinical situation and the substrate treatment10.1016/j.dental.2009.11.149 ↗
42. Bonding stability of adhesive systems to eroded dentin10.1590/1807-3107BOR-2015.vol29.0088 ↗
43. Selective ablation of dental enamel and dentin using femtosecond laser pulses10.1002/lapl.200710082 ↗
44. Ti:sapphire femtosecond laser ablation of dental enamel, dentine, and cementum10.1007/s10103-011-0932-z ↗
45. Influence of the hydration state on the ultrashort laser ablation of dental hard tissues10.1007/s10103-012-1118-z ↗
46. Effects of different treatments on chemical and morphological features of eroded dentin10.1007/s10103-018-2482-0 ↗
47. 2006
48. Ablation of carious dental tissue using an ultrashort pulsed laser (USPL) system10.1007/s10103-014-1594-4 ↗
49. Effective laser ablation of enamel and dentine without thermal side effects10.2351/1.4745457 ↗
50. Making superwetting human enamel and dentin surfaces for enhanced adhesion10.1063/1.3660579 ↗
51. Role of chlorhexidine in bond strength to artificially eroded dentin over time10.3290/j.jad.a34059 ↗
52. Morphology of ablation craters generated by ultra-short laser pulses in dentin surfaces: AFM and ESEM evaluation10.1016/j.apsusc.2010.08.037 ↗
53. High resolution SEM evaluation of dentin etched with maleic and citric acid10.1016/S0109-5641(01)00017-3 ↗
54. Influence of the organic matrix on root dentine erosion by citric acid10.1159/000083159 ↗
55. Erosion effects on chemical composition and morphology of dental materials and root dentin10.1002/jemt.21115 ↗
56. The histological features and physical properties of eroded dental hard tissues10.1159/isbn.978-3-318-02553-8 ↗
57. Acid etching concentration as a strategy to improve the adhesive performance on Er:YAG laser and bur-prepared demineralized enamel10.1089/pho.2013.3655 ↗
58. Microtensile vs microshear bond strength of all-in-one adhesives to unground enamel10.3290/j.jad.a18237 ↗
59. Efficacy of microtensile versus microshear bond testing for evaluation of bond strength of dental adhesive systems to enamel10.1016/j.dental.2010.04.010 ↗