Spectroscopy-based smart optical monitoring system in the applications of laser additive manufacturing

The potential defects during the additive manufacturing (AM) process greatly deteriorate the mechanical properties of the fabricated structures and, as a result, increase the risks of part fatigue failure and even disasters. As laser additive manufacturing is such a complex process, many different physical phenomena such as electromagnetic radiation, optical and acoustic emission, and plasma generation will occur. Unlike vision and acoustic methods, the spectroscopy based smart optical monitoring system (SOMS) provides atomic level information revealing mechanical and chemical condition of the product. By monitoring plasma, multiple information such as line intensity, standard deviation, plasma temperature, or electron density, and by using different signal processing algorithms such as vector machine training or wavelet transforming, AM defects have been detected and classified. Utilizing two fiber optic components, a bifurcated fiber and a split fiber, the experimental results were performed to improve SOMS signal-to-noise ratio. Defects, including subsurface pores and sudden changes of process parameters including shielding gas shut-off and foreign substance, were identified by the spectroscopy based SOMS. For chemical composition characterization, a degree of dilution in terms of chemical element variation is identified by a spectral peak intensity ratio through the SOMS. It turned out that the information on the Cr/Fe ratio of deposit at a certain layer is vital to design the mechanical property in the IN625 deposition on the mild steel case. The SOMS has also demonstrated that the chemistry ratio can be determined from the calibration curve method based on the known alloy samples and that the ratio of the maximum intensities of multiple species provides more information about the quality of the alloy.