journal article·2022-11-01

Spatially tailored laser energy distribution using innovative optics for gas-tight welding of casted and wrought aluminum alloys in e-mobility

Mauritz Möller, Patrick Haug, Philipp Scheible, Christian Buse, Conrad Frischkorn, Nicolai Speker

Journal of Laser Applications· Volume 34· Issue 4
Publisher page

Abstract

Electric mobility is undergoing a very rapid maturation process [A. Kampker, K. Kreisköther, P. Treichel, T. Möller, Y. Boelsen, and D. Neb, “Electromobility trends and challenges of future mass production,” in Handbook Industry 4.0, edited by W. Frenz (Springer, Berlin, 2022), D. Ziegler and N. Abdelkafi, “Business models for electric vehicles: Literature review and key insights,” J. Cleaner Prod. 330, 129803 (2022)]. While conventional vehicle design disciplines such as car body design are established, electromobility-specific disciplines are in the technological orientation and ramp-up phase. In particular, the demand for components like batteries, e-motors, and power electronics is growing continuously [A. Kampker, K. Kreisköther, P. Treichel, T. Möller, Y. Boelsen, and D. Neb, “Electromobility trends and challenges of future mass production,” in Handbook Industry 4.0, edited by W. Frenz (Springer, Berlin, 2022), D. Ziegler and N. Abdelkafi, “Business models for electric vehicles: Literature review and key insights,” J. Cleaner Prod. 330, 129803 (2022)]. One of the major materials chosen for these parts is aluminum alloys [C. Prieto, E. Vaamonde, D. Diego-Vallejo, J. Jimenez, B. Urbach, Y. Vidne, and E. Shekel, “Dynamic laser beam shaping for laser aluminium welding in e-mobility applications,” Procedia CIRP. 94, 596–600 (2020)]. Next to the material-specific challenges and mentioned requirements, the focus is on the gas-tight welding of aluminum alloys for parts like casted power electronics housings and heat exchangers made of sheet metal or extrusion profiles. Gas-tightness is a requirement, on the one hand, to shield electronic components from the influence of the surrounding environment and, on the other hand, to prevent leakage of the water-cooling circuit [C. Prieto, E. Vaamonde, D. Diego-Vallejo, J. Jimenez, B. Urbach, Y. Vidne, and E. Shekel, “Dynamic laser beam shaping for laser aluminium welding in e-mobility applications,” Procedia CIRP. 94, 596–600 (2020), A. Artinov, M. Bachmann, X. Meng, V. Karkhin, and M. Rethmeier, “On the relationship between the bulge effect and the hot cracking formation during deep penetration laser beam welding,” Procedia CIRP 94, 5–10 (2020)]. This paper offers insight into the requirements of these parts and an innovative optics approach with a novel MultiFocus solution. Material-specific challenges (e. g. porosity), especially, for helium-tight welding of aluminum casted housings with forging alloys are characterized. This analysis is conducted using gas-tightness measurements, CT-scans, micrographs, and high-speed recordings in order to elaborate on the fundamental laser-material-process interdependencies and the correlation between the process and resulting quality, in terms of tightness. Furthermore, high-speed synchrotron recordings are conducted at the DESY and based on that, a detailed evaluation of laser and material interaction is conducted. This allows an explanation of the interactions for the prevention of pore formation in aluminum alloys and, thus, the characterization of the boundary conditions for a reliable process of gas-tight welding on aluminum alloys [C. Prieto, E. Vaamonde, D. Diego-Vallejo, J. Jimenez, B. Urbach, Y. Vidne, and E. Shekel, “Dynamic laser beam shaping for laser aluminium welding in e-mobility applications,” Procedia CIRP. 94, 596–600 (2020)].
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Trumpf Laser- und Systemtechnik GmbH 1 , Johann-Maus-Straße 2, 71254 Ditzingen, Germany

Benteler Automobiltechnik GmbH 2 , An der Talle 27-31, 33102 Paderborn, Germany

References (17)

Show source-provided references
1. Electromobility trends and challenges of future mass production10.1007/978-3-662-64448-5 ↗
2. Business models for electric vehicles: Literature review and key insights10.1016/j.jclepro.2021.129803 ↗
3. Dynamic laser beam shaping for laser aluminium welding in e-mobility applications10.1016/j.procir.2020.09.084 ↗
4. The effect of welding speed on mechanical and microstructural properties of 5754Al (AlMg3) alloy joined by laser welding10.1088/2053-1591/aad3b0 ↗
5. Weld metal composition change during conduction mode laser welding of aluminum alloy 518210.1007/s11663-001-0018-6 ↗
6. Mit dem laser in die Zukunft der Elektromobilität
7. On the relationship between the bulge effect and the hot cracking formation during deep penetration laser beam welding10.1016/j.procir.2020.09.002 ↗
8. Trend and innovations in laser beam welding of wrought aluminum alloys10.1007/s40194-016-0317-9 ↗
9. Weldability of aluminum alloys for automotive applications10.1016/j.phpro.2017.08.011 ↗
10. High-speed x-ray investigation of pore formation during full penetration laser beam welding of AA6016 aluminum sheets contaminated with lubricants10.3390/app10062077 ↗
11. W. Gref, “Laserstrahlschweißen von Aluminiumwerkstoffen mit der Fokusmatrixtechnik,” Ph.D. dissertation, Forschungsberichte des IFSW, 2005.
12. Novel multi focus optic approach for gas-tight welding of aluminum alloys in e-mobility
13. Geometry and stability of the capillary during deep-penetration laser welding of AlMgSi at high feed rates10.1016/j.optlastec.2020.106562 ↗
14. B. Hohenberger, “Laserstrahlschweißen mit Nd:YAG-Doppelfokustechnik—Steigerung von Prozessstabilität, Flexibilität und verfügbarer Strahlleistung,” Ph.D. dissertation, Forschungsberichte des IFSW, 2003.
15. Advances in beam shaping of high-power CW-lasers with BrightLineWeld technology10.1117/12.2607138 ↗
16. 2022
17. 2021