Laser interaction in a water tank configuration: Higher confinement breakdown threshold and greater generated pressures for laser shock peening
Source abstract
Abstract
The authors present a new configuration for laser-induced plasmas in confined regimes for a 10 ns-range laser pulse in the green wavelength (532 nm) that repulses the breakdown threshold above 20 GW/cm2 compared to 8 GW/cm2 as generally indicated in previous works. Using this new configuration, pressures above 12 GPa have been reached for the first time in confined regimes. This can enlarge the range of applications of laser shock such as the range of treatable materials (very high strength materials) or facilities’ costs since neither vacuum nor heavy laser systems will be needed to reach these levels of pressure. The proposed configuration mainly consists of the usage of a water tank. Hence, a great thickness of water is used instead of the extensively used thin water layer. Therefore, the water breakdown plasma will not initiate at the surface of the water, as the laser beam is still not focused there. Instead, it will occur in the depth of the water. In that case, the breakdown threshold value is increased as either the avalanche breakdown or the multiphoton ionization may start at higher laser intensities than at the air/water interface. The authors experimentally demonstrated this new breakdown threshold with the measurement of transmitted intensity, transmitted pulse duration, and the indirect measurement of the plasma pressure. Multiple shots (laser shock treatment) were also performed, and the specimen surface deformation was measured, leading to the same conclusion.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Ocular and Laser Science Research · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratoire Procédés et Ingénierie en Mécanique et Matériaux (PIMM), UMR8006 ENSAM, CNRS, CNAM 1 , 151 bd de l’Hôpital, 75013 Paris, France
CEA, DAM, DIF 2 , 91297 Arpajon, France
THALES LAS France 3 , 78990 Elancourt, France
Laboratoire Matière en Conditions Extrêmes, Université Paris-Saclay, CEA 4 , 91680 Bruyẽres-le-Châtel, France
Funding
Agence Nationale de la Recherche · Thales Group · Centre National de la Recherche Scientifique · Commissariat à l'Énergie Atomique et aux Énergies Alternatives · ENSAM
References (24)
Show source-provided references
1. Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour10.1016/0921-5093(95)10084-9 ↗
2. Process development and monitoring in stripping of a highly transparent polymeric paint with ns-pulsed fiber laser10.1016/j.optlastec.2017.01.031 ↗
3. Development of the symmetrical laser shock test for weak bond inspection10.1016/j.optlastec.2018.10.052 ↗
4. Laser space propulsion overview10.1117/12.729495 ↗
5. Laser-generated stress waves10.1063/1.1653116 ↗
6. Physical study of laser–produced plasma in confined geometry10.1063/1.346783 ↗
7. Shock waves from a water-conned laser-generated plasma10.1063/1.366113 ↗
8. Numerical modeling of the transmission of breakdown plasma generated in water during laser shock processing10.1051/epjap:2001202 ↗
9. Wavelength dependent of laser shock-wave generation in the water-confinement regime10.1063/1.370553 ↗
10. Experimental investigation of optical breakdown thresholds in ocular media under single pulse irradiation with different pulse durations
11. Proc. SPIE · 2003 · 4831 · 46310.1117/12.497617 ↗
12. Plasma formation in water by picosecond and nanosecond nd:yag laser pulses—part I: Optical breakdown at threshold and superthreshold irradiance10.1109/2944.577307 ↗
13. Numerical simulation for laser-induced breakdown thresholds and plasma formation in water
14. Laser interferometer for measuring high velocities of any reflecting surface10.1063/1.1660986 ↗
15. Physics and applications of laser-shock processing10.2351/1.521861 ↗
16. Laser shock peening: Toward the use of pliable solid polymers for connement10.3390/met9070793 ↗
17. Beam size dependency of a laser-induced plasma in confined regime: Shortening of the plasma release. Influence on pressure and thermal loading10.1016/j.optlastec.2020.106689 ↗
18. Development of a numerical code for laser-induced shock waves applications10.1016/j.optlastec.2019.105983 ↗
19. A. Sollier, “Etude des plasmas générés par interaction laser-matière en régime confiné: Application au traitement des matériaux par choc laser,” Ph.D. thesis (Université de Versailles St-Quentin, 2002), thèse de doctorat dirigée par Fabbro, Rémy Physique Versailles-St Quentin en Yvelines, 2002.
20. Study of the plastification of metallic targets shocked by a laser pulse of high energy10.1051/jphyscol:1988357 ↗
21. Analysis of laser shock waves and resulting surface deformations in an Al–Cu–Li aluminum alloy10.1088/0022-3727/45/33/335304 ↗
22. Residual stresses induced by laser-shocks10.1051/jp4:1991369 ↗
23. 10.17877/DE290R-485410.17877/DE290R-4854 ↗
24. Impulse coupling to targets in vacuum by KrF, HF, and CO2 single-pulse lasers10.1063/1.341867 ↗