journal article·2024-05-01

Characterization of the deformation behavior and microstructure evolution in laser bending of TC4 titanium alloy heavy plate

Yulin Shao, Zhanzhou Liu, Haochen Ding, Chi Zhang, Zhiwen Shao, Liwen Zhang

Journal of Laser Applications· Volume 36· Issue 2
Publisher page

Abstract

A new plastic processing method for laser bending of TC4 titanium alloy heavy plates was developed in this work. Different from previous studies, the thickness of the plates in this work reached 6 and 12 mm. High-energy laser beam was applied on the surface of the TC4 titanium alloy heavy plate, resulting in thermal stress on the surface of the plate and causing bending deformation. The microstructure and mechanical properties of the bended plates were investigated. A finite element model was also developed to simulate the laser-assisted bending process of the TC4 titanium alloy heavy plate. The microstructure observation indicates that the original α + β worm-like microstructure changed to basket-weave microstructure composed of α′ phase of acicular martensite after laser bending. This microstructure with high densities of dislocation and twinning played an important role in grain boundary strengthening. Therefore, the hardness of the center of the heat-affected zone > the hardness of the base metal > the hardness of the edge of the heat-affected zone after bending. The tensile strength of the heat-affected zone is not significantly different from that of the base metal, but the tensile elongation is slightly lower than that of the base metal and its plasticity is lower. The simulation implies that temperature gradients in the normal direction caused by laser scanning can stimulate a horizontal partial stress σx. The variation of σx causes the plate form a bending angle after laser scanning.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Laser and Thermal Forming Techniques · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Dalian University of Technology 1 , Dalian 116024, China

Ningbo Branch, Ordnance Science Institute of China 2 , Ningbo 315103, China

Funding

The key research program in Ningbo city, Zhejiang province · National Natural Science Foundation of China

References (24)

Show source-provided references
1. Increasing the capability of laser peen forming to bend titanium alloy sheets with laser-assisted local heating10.1016/j.matdes.2015.10.128 ↗
2. Effect of laser surface texturing (LST) on tribological behavior of double glow plasma surface zirconizing coating on Ti6Al4V alloy10.1016/j.surfcoat.2019.04.038 ↗
3. Laser micro-bending process based on the characteristic of the laser polarization10.1016/j.jmatprotec.2011.07.010 ↗
4. Modelling of laser forming-An review10.1016/j.commatsci.2009.04.022 ↗
5. Research on the mechanisms of laser forming for the metal plate10.1016/j.ijmachtools.2005.09.016 ↗
6. A comprehensive study on the effect of line energy during laser bending of duplex stainless steel10.1016/j.optlastec.2022.108025 ↗
7. Improving bend angle by using forced cooling when laser bending Al sheet
8. A comparative study on laser bending process with linear and curved irradiating schemes10.1016/j.ijleo.2022.169426 ↗
9. Experimental study and statistical analysis of bending titanium alloy sheet with continuous wave fiber laser10.1007/s43452-022-00426-4 ↗
10. Improvements in springback control by external force laser-assisted sheet bending of titanium and aluminum alloys10.1016/j.optlastec.2016.06.013 ↗
11. An analytical model for the optimization of the laser bending of titanium Ti–6Al–2Sn–4Zr–2Mo10.1016/S0924-0136(02)00223-6 ↗
12. An analytical model of laser bending angle under preload10.1007/s00170-020-05521-5 ↗
13. Study of laser bending of a preloaded titanium alloy sheet10.1051/mfreview/2015002 ↗
14. Laser micro bending process of Ti6Al4V square bar10.3390/mi5020359 ↗
15. Enhancing process competency by forced cooling in laser bending process10.1080/01495739.2022.2103057 ↗
16. 1994
17. Developments in cutting tool technology in improving machinability of Ti6Al4V alloy: A review10.1177/0954405416640176 ↗
18. Thermophysical properties of solid and liquid Ti-6Al-4V (TA6V) alloy10.1007/PL00021868 ↗
19. Numerical and experimental study on multi-pass laser bending of AH36 steel strips10.1016/j.optlastec.2017.09.014 ↗
20. Achieving ultrafine grained structure in Ti-6Al-4V alloy by high strain rate deformation with a martensitic microstructure10.1016/j.matlet.2019.04.110 ↗
21. Increasing the capability of laser peen forming to bend titanium alloy sheets with laser-assisted local heating10.1016/j.matdes.2015.10.128 ↗
22. Phase transformation dynamics during welding of Ti-6Al-4V10.1063/1.1737476 ↗
23. Fatigue performance of zirconia-reinforced Ti-6Al-4V nanocomposite processed by laser powder bed fusion: An improvement by hot isostatic pressing10.1016/j.ijfatigue.2022.107129 ↗
24. Experimental and numerical investigation on bending behavior of Ti-6Al-4V parts produced by additive metal laser sintering10.1007/s11665-021-06192-3 ↗