Effects of structure parameters on performances of laser powder bed fusion processed AlSi10Mg body-centered cubic lattices

The study aims to explore the impact of structural parameters on the formability, mechanical properties, and heat conductivity of body centered cubic (BCC) lattice structures produced through laser powder bed fusion (LPBF). The BCC lattice structures with varied cell diameters and cell sizes were fabricated using LPBF. Surface morphologies, compression properties, and numerical simulation of heat transfer were carried out. Results indicated that the relative density of the BCC structure was influenced by the diameter and size of the cell. An increase in the diameter or a decrease in the size of the cell led to an increase in the relative density of the BCC lattice structure. However, the surface forming quality decreased. On the other hand, the compressive strength of the structure increased, and the heat transfer property was also enhanced. The BCC lattice structure achieved its highest relative density and obtained a peak compressive strength of 320.66 MPa when the cell rod diameter was 1.5 mm and the cell size was 3 mm.