Assessing the quality and productivity of laser cladding and direct energy deposition: Guidelines for researchers
Source abstract
Abstract
This paper provides guidelines and advice to researchers and engineers in the field of laser cladding and related direct energy deposition techniques to help establish a standardized approach to quality assessment and productivity metrics. Factors considered are deposit geometry, porosity, cracking, dilution, build-up/coverage rate, and powder catchment efficiency.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Engineering, The University of Nottingham 1 , Nottingham, United Kingdom
University of Stuttgart, ICM 2 , D-70569 Stuttgart, Germany
Addideba Laser & AM Solutions 3 , Deba, Spain
References (76)
Show source-provided references
1. The effect of process parameters and characterization for the laser cladding of cBN based composite clad over the Ti6Al4V alloy10.1016/j.matchemphys.2022.126410 ↗
2. Coaxial laser cladding of cobalt-base alloy Stellite™ 6 on grey cast iron analysis of the microstructural and mechanical properties depending on the laser power10.1007/s11665-022-07358-3 ↗
3. Process optimization, microstructure and microhardness of coaxial laser cladding TiC reinforced Ni-based composite coatings10.1016/j.optlastec.2022.108129 ↗
4. Influence of laser power and scanning speed on the formation of single tracks formed by laser cladding10.4028/www.scientific.net/SSP.313.15 ↗
5. Porosity reduction in WC-12Co laser cladding by aluminum addition10.1016/j.ijrmhm.2022.106020 ↗
6. 2002 · 107
7. 2014
8. Automatic weld defect identification from radiographic images10.1016/j.ndteint.2012.11.005 ↗
9. Crack defects and formation mechanism of FeCoCrNi high entropy alloy coating on TC4 titanium alloy prepared by laser cladding10.1016/j.jallcom.2022.163905 ↗
10. Selecting process parameters of crack-free Ni60A alloy coating prepared by coaxial laser cladding10.1016/j.optlastec.2021.107805 ↗
11. Deposition of nickel-based superalloy claddings on low alloy structural steel by direct laser deposition10.3390/met11081326 ↗
12. Reliability and sensitivity of magnetic particle nondestructive testing in detecting the surface cracks of welded components10.1080/10589759.2018.1428322 ↗
13. Alcance y aplicabilidad de la sentencia del tribunal de justicia de la unión europea de 20 de diciembre de 2017 (caso uber)10.1387/lan-harremanak.20882 ↗
14. Phased array ultrasonic inspection of metal additive manufacturing parts
15. Infrared thermography for weld inspection: Feasibility and application10.3390/infrastructures3040045 ↗
16. A study of metallurgy and erosion in laser surface alloying of AlxCu0.5FeNiTi high entropy alloy10.1016/j.surfcoat.2019.01.042 ↗
17. Surface stiffness gradient in Ti parts obtained by laser surface alloying with Cu and Nb10.1016/j.surfcoat.2016.04.025 ↗
18. Design and characterization of FeCrCoAlMn0.5Mo0.1 high-entropy alloy coating by ultrasonic assisted laser cladding10.1016/j.jallcom.2020.155449 ↗
19. Dynamic observation of formation process in laser cladding using high speed video camera10.2351/1.5062915 ↗
20. Parametric optimization of GaS metal arc welding process by Taguchi method on weld dilution10.7763/IJMO.2011.V1.38 ↗
21. Prediction of solidification cracking by an empirical-statistical analysis for laser cladding of Inconel 718 powder on a non-weldable substrate10.1016/j.optlastec.2020.106244 ↗
22. Systematic evaluation of process parameter maps for laser cladding and directed energy deposition10.1016/j.addma.2018.04.002 ↗
23. The effect of laser process parameters on microstructure and dilution rate of cladding coatings10.1088/1757-899X/307/1/012035 ↗
24. Ultrafine eutectic coatings from Fe-Nb-B powder using laser cladding10.1016/j.matchar.2019.110080 ↗
25. Analysis of the process parameter influence in laser cladding of 316L stainless steel10.3390/jmmp2030055 ↗
26. An empirical-statistical model for coaxial laser cladding of NiCrAlY powder on Inconel 738 superalloy10.1016/j.optlastec.2016.06.014 ↗
27. Nd:YAG laser cladding of Co–Cr–Mo alloy on γ-TiAl substrate10.1016/j.optlastec.2016.01.003 ↗
28. An empirical-statistical model for laser cladding of WC-12Co powder on AISI 321 stainless steel10.1016/j.optlastec.2017.06.026 ↗
29. Influence of using electroless Ni-P coated WC-Co powder on laser cladding of stainless steel10.1016/j.surfcoat.2018.05.016 ↗
30. Laser cladding of Inconel 625 wire for corrosion protection10.1016/j.jmatprotec.2014.10.024 ↗
31. Improved high-temperature hardness and wear resistance of Inconel 625 coatings fabricated by laser cladding10.1016/j.jmatprotec.2016.12.001 ↗
32. Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels10.1016/j.msea.2017.12.003 ↗
33. 10.2351/1.506074710.2351/1.5060747 ↗
34. Processing window development for laser cladding of zirconium on zirconium alloy10.1016/j.jmatprotec.2015.11.028 ↗
35. The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects)10.1016/j.ijmachtools.2004.01.001 ↗
36. Modeling and simulation of 3D geometry prediction and dynamic solidification behavior of Fe-based coatings by laser cladding10.1016/j.optlastec.2021.107009 ↗
37. Analytical model of the catchment efficiency in high speed laser cladding10.1016/j.surfcoat.2009.07.041 ↗
38. Interplay between powder catchment efficiency and layer height in self-stabilized laser metal deposition10.1016/j.optlaseng.2021.106817 ↗
39. An in-process method for the inverse estimation of the powder catchment efficiency during laser cladding10.1016/S0030-3992(98)00007-3 ↗
40. Laser cladding of transparent fused silica glass using sub-mm powder10.1364/OME.433734 ↗
41. Comparison of coaxial and off-axis nozzle configurations in one step process laser cladding on aluminum substrate10.1016/j.jmatprotec.2012.06.011 ↗
42. Investigating laser rapid manufacturing for Inconel-625 components10.1016/j.optlastec.2006.01.008 ↗
43. Numerical simulation and experimental study of powder flow distribution in high power direct diode laser cladding process10.1007/s40516-015-0015-2 ↗
44. Influence of fluid convection on weld pool formation in laser cladding
45. Parameters development for optimum deposition rate in laser DMD of stainless steel EN X3CrNiMo13-410.1007/s40516-021-00161-3 ↗
46. Laser cladding of Inconel 625 on AISI 316L: Microstructural and mechanical evaluation of parameters estimated by empirical-statistical model10.1007/s11665-021-06147-8 ↗
47. Comparative studies on the NI60 coatings deposited by conventional and induction heating assisted extreme-high-speed laser cladding technology: Formability, microstructure and hardness10.1016/j.jmrt.2021.12.110 ↗
48. Elimination of start/stop defects in laser cladding10.1016/j.surfcoat.2011.10.040 ↗
49. Statistical analysis and optimization of processing parameters in high-power direct diode laser cladding10.1007/s00170-014-6041-y ↗
50. Analysis of laser powder deposition parameters: ANFIS modeling and ICA optimization10.1016/j.ijleo.2016.01.070 ↗
51. Tribological properties of solid solution strengthened laser cladded NiCrBSi/WC-12CO metal matrix composite coatings10.3390/ma15010342 ↗
52. Optimal parameters for 5-axis laser cladding10.1016/j.proeng.2013.08.229 ↗
53. Mitigation of pores generation at overlapping zone during laser cladding10.1016/j.jmatprotec.2014.09.025 ↗
54. Effect of defocus manner on laser cladding of Fe-based alloy powder10.1016/j.surfcoat.2014.03.019 ↗
55. Optical monitoring of high power direct diode laser cladding10.1016/j.optlastec.2014.06.002 ↗
56. Selection of powder or wire feedstock material for the laser cladding of Inconel® 62510.1016/j.jmatprotec.2016.01.004 ↗
57. Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding10.1016/j.apsusc.2020.146085 ↗
58. A simple model of powder catchment in coaxial laser cladding10.1016/S0030-3992(99)00046-8 ↗
59. Improvement of strategies and parameters for multi-axis laser cladding operations10.1016/j.optlaseng.2013.12.017 ↗
60. Laser cladding of tial intermetallic alloy on Ti6Al4V-process optimization and properties10.1016/j.phpro.2014.08.173 ↗
61. MoSi2 laser cladding—Elaboration, characterisation and addition of non-stabilized ZrO2 powder particles10.1016/S0966-9795(03)00105-5 ↗
62. Recent developments in high power laser cladding techniques10.2351/1.5062441 ↗
63. Optimization of microstructure and properties of composite coatings by laser cladding on titanium alloy10.1016/j.ceramint.2020.09.063 ↗
64. Optimizing direct laser metal deposition of H13 cladding on cube alloy substrate10.1016/j.surfcoat.2022.128084 ↗
65. Technological possibilities of laser cladding with the help of powerful fiber lasers10.1007/s11041-012-9470-y ↗
66. Study of an annular laser beam based axially-fed powder cladding process10.1016/j.cirp.2018.04.082 ↗
67. Parametric investigation of pulsed Nd: YAG laser cladding of stellite 6 on stainless steel10.1016/j.surfcoat.2004.03.058 ↗
68. Comparison of clad layer characteristics with overlapping criterion in multi pass laser cladding10.5916/jkosme.2016.40.9.768 ↗
69. 2011 · 27
70. Microstructure and corrosion resistance of TiC/Inconel 625 composite coatings by extreme high speed laser cladding10.1016/j.optlastec.2022.107919 ↗
71. Influence of macrosegregation on solidification cracking in laser clad ultra-high strength steels10.1016/j.surfcoat.2018.02.052 ↗
72. Microstructure and wear behavior of laser clad interstitial CoCrFeNi high entropy alloy coating reinforced by carbon nanotubes10.1016/j.surfcoat.2022.128241 ↗
73. Cladding of tribaloy T400 on steel substrates using a high power Nd:YAG laser10.1016/j.surfcoat.2018.06.069 ↗
74. Study on laser cladding of heat resisting steel using EuTroLoy 16006 powder (II)-characteristics of alloying elements distribution of multi pass clad layer
75. Melt pool temperature control using labview in Nd:YAG laser blown powder cladding process
76. The influence of the powder stream on high-deposition-rate laser metal deposition with inconel 71810.3390/met7100443 ↗