Solidification model of laser cladding with wire feeding technique
Source abstract
Abstract
The object of this study is to investigate the solidification problem in laser cladding with the wire feeding technique. The solidification phenomenon of laser cladding was analyzed by numerical simulation and experimental visualization. Good agreement has been obtained for 304 stainless steel wires cladding on round tubes and it transpires that there were three basic modes of clad profiles: thinning, thickening, and wavering of the clad thickness at different velocity settings between the feeding wire and the substrate in laser wire cladding.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, National Cheng Kung University, Tainan 701, Taiwan
References (14)
Show source-provided references
1. Simulation of the spray-forming process using a wire-fed laser technique
2. Interactions between laser beam and filler metal
3. Bridging the joint gap with wire feed laser welding
4. A thermal model of laser cladding by powder injection10.1007/BF02649723 ↗
5. A simple but realistic model for laser cladding10.1007/BF02665211 ↗
6. Melt pool shape and dilution of laser cladding with wire feeding10.1016/S0924-0136(00)00528-8 ↗
7. A mathematical model for thermal analysis of thin strip casting of low carbon steel10.1115/1.2899622 ↗
8. Theoretical analysis of fluid dynamics and heat transfer in the single roller rapid solidification method
9. A mathematical model of single roll strip caster based on macroscopic enthalpy balances10.1002/srin.199101268 ↗
10. Heat and fluid flow simulation of the melt-drag single-roll strip casting process10.1016/0924-0136(92)90143-G ↗
11. Analysis for melt puddle in the planar flow casting process-A mathematical modeling study10.1016/0307-904X(92)90074-D ↗
12. A three-dimensional fluid flow model for puddle formation in the single-roll rapid solidification process10.1016/0307-904X(95)00089-3 ↗
13. Volume of fluid (VOF) method for the dynamics of free boundaries10.1016/0021-9991(81)90145-5 ↗
14. Analysis of the ribbon formation process on the single roller rapid solidification technique10.2320/matertrans1960.27.51 ↗