Investigation of networked SSHI configurations for plate-based piezoelectric energy harvesters

Piezo-patch energy harvesters attached to plate-like structures can be used to extract multimodal vibrational energy. For each piezo-patch, SSHI circuits can boost the harvested power compared to standard rectifier circuits. However, the effect of using different configurations of the SSHI network for multiple piezo-patches on plate structures has not yet been understood. This study aims to assess the performance of the networked SSHI configurations compared to networked rectifier configurations and investigate the optimum configurations for energy harvesting purposes. For this, three piezo-patches are bonded to an aluminum plate and connected to single and/or multiple circuits. The equivalent circuit model (ECM) of the electromechanical system is developed from the experimentally validated analytical model and utilized in simulation software LTspice. The performances of considered configurations are evaluated regarding peak power outputs, and the optimal load resistances are obtained. Based on the experimental findings, the best configuration is determined and verified by simulations. The results show that by using respective SSHIs, the power output can be improved by preventing charge cancellation despite the cost of increased diode loss. This study contributes to our understanding of optimal energy harvesting techniques by investigating the effectiveness of networked SSHI configurations for multiple piezo-patches on plate structures.