A simple method to characterize the impedance of pyroelectric materials at ultra-low frequencies

The purpose of this work is to demonstrate a new simple stand-alone method of characterizing the impedance of a pyroelectric cell. This method utilizes a pyroelectric single pole low-pass filter technique. Utilizing the properties of a pyroelectric single pole low-pass filter technique, a known input voltage is applied and using simple equations, capacitance C _p and resistance R _p at a frequency range of 1 mHz to 1 Hz can be calculated. For verification purposes, an LCR meter and an impedance analyzer were exploited at 10 and 100 Hz, respectively. Results showed that R _p values for two materials, lead zirconate titanate-5A and polyvinylidene difluoride, were within 8%, and C _p values were within 7.5%. In addition, to verify the importance of the impedance values in energy harvesting applications, output power was measured with varying impedance values. The optimal load resistances for polyvinylidene difluoride and lead zirconate titanate-5A were consistent with the measured pyroelectric impedance at the particular heat range with 10.9% and 1.4%, respectively. The pyroelectric single pole low-pass filter method presented here demonstrates that for pyroelectric materials the impedance depends on two major factors: (1) average working temperature and (2) the heating rate. Neglecting these two factors can result in inefficient and unpredictable behavior of pyroelectric materials when used in energy harvesting applications.