Analytical modelling of Rolamite mechanism made of shape-memory alloy for constant force actuators

This article analyses the Rolamite architecture exploiting shape-memory alloys as power element to obtain a solid-state actuator. The Rolamite mechanism was discovered in the late 1960s, initially as precision and low friction linear bearing. The most common Rolamite configuration consists of a flexible thin metal strip and two rollers mounted between two fixed parallel guide surfaces. The system can roll back and forth without slipping guided by the plates along its so-called sensing axis. The system presents another relevant advantage in addition to low friction coefficient, which is the possibility to provide force generation in a quite simple way. In the original literature works, the force was provided, thanks to cut-outs of various shapes in the strip, although this method does not allow the Rolamite to be considered a proper actuator, but only a force generator. In this article, we developed the idea of exploiting the shape-memory alloy as Rolamite power element, and therefore, to use the shape-memory effect to change the elastic properties of the strip and to provide the actuation force. The mechanical analysis, where the martensite–austenite transition is modelled in a simplified way, shows that this application is feasible, mainly thanks to the initial precurvature of the shape-memory alloy strip. The discussion of the results highlights some important merits of this architecture such as long stroke, constant force and compactness.