Fatigue of metals under nonuniform stressed state. Part 1. Stressed state assessment methods and results of investigation
Source abstract
Abstract
We discuss the methods of assessment of stress-strain state and stress gradient in nonuniformly stressed structural components under elastic and elastic-plastic cyclic deformation. We systematize the research findings on fatigue of metals and alloys, including the stress concentration case, as well as the methods that describe the dependence of fatigue characteristics on the stress gradient.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · Engineering Diagnostics and Reliability · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. R. B. Heywood, Designing against Fatigue, Chapman and Hall Limited, London (1962).
2. V. T. Troshchenko, Fatigue and Inelasticity of Metals [in Russian], Naukova Dumka, Kiev (1971).
3. S. V. Serensen, V. P. Kogaev, and R. M. Shneiderovich, Load-Carrying Capacity and Strength Analysis of Machine Components [in Russian], Mashinostroenie, Moscow (1975).
4. V. T. Troshchenko, Deformation and Fracture of Metals under High-Cycle Loading [in Russian], Naukova Dumka, Kiev (1981).
5. M. Klesnil and P. Lukas, Fatigue of Metallic Materials, Academia, Prague (1980).
6. R. A. Naik, D. B. Lanning, T. Nicholas, and A. R. Kalemeyer, “A critical plane gradient approach for the prediction of notched HCF life,” Int. J. Fatigue, 27, 481–492 (2005).10.1016/j.ijfatigue.2004.10.003 ↗
7. Y. Jiang and B. Xu, “Deformation analysis of notched components and assessment of approximate methods,” Fatigue Fract. Eng. Mater. Struct., 24, No. 11, 729–740 (2001).10.1046/j.1460-2695.2001.00410.x ↗
8. E. Siebel and M. Stieler, “Ungleichforming Spannungsverteilung bei schwingender Beanspruchung,” VDI Z., 97 (5), 121–126 (1955).
9. H. Neuber, Theory of Notch Stresses: Principles for Exact Stress Calculation, Springer Press, Berlin (1945).
10. R. E. Peterson, Stress Concentration Factors, Wiley, New York (1974).
11. R. B. Heywood, “Stress concentration factors relating theoretical and practical factors in fatigue loading,” Engineering, 179, 146 (1959).
12. J. Schijve, “Stress gradients around notches,” Fatigue Eng. Mater. Struct., 3, No. 4, 325–338 (1980).10.1111/j.1460-2695.1980.tb01382.x ↗
13. M. Filippini, “Stress gradient calculations at notches,” Int. J. Fatigue, 22, No. 5, 397–409 (2000).10.1016/S0142-1123(00)00010-4 ↗
14. R. E. Peterson, “Notch sensitivity,” in: G. Sines and J. L. Waisman (Eds.), Metal Fatigue, McGraw-Hill, New York (1959).
15. R. B. Heywood, “The relationship between fatigue and stress concentration,” Aircraft Eng., 19, March, 81–84 (1947).10.1108/eb031482 ↗
16. N. A. Noda and Y. Takase, “Stress concentration formulas useful for any shape of notch in a round test specimen under tension and bending,” Fatigue Fract. Eng. Mater. Struct., 22, No. 12, 1071–1082 (1999).10.1046/j.1460-2695.1999.00230.x ↗
17. N. A. Noda, Y. Takase, and K. Monda, “Stress concentration factors for shoulder fillets in round and flat bars under various loads,” Int. J. Fatigue, 19, No. 1, 75–84 (1997).10.1016/S0142-1123(97)82050-6 ↗
18. M. M. Lee, “Estimation of stress concentrations in single-sided welds in offshore tubular joints,” Int. J. Fatigue, 21, No. 9, 895–908 (1999).10.1016/S0142-1123(99)00083-3 ↗
19. N. A. Noda and Y. Takase, “Stress concentration formula useful for all notch shapes in a round bar (comparison between torsion, tension, and bending),” Int. J. Fatigue, 28, No. 2, 151–163 (2006).10.1016/j.ijfatigue.2005.04.015 ↗
20. W. Ramberg and W. R. Osgood, Description of Stress–Strain Curves by Three Parameters, NACA Tech. Note No. 902 (1943).
21. H. Neuber, “Theory of stress concentration for shear-strained prismatic bodies with arbitrary nonlimar stress-strain law,” J. Appl. Mech. (Trans. ASME), 28, 544–549 (1961).10.1115/1.3641780 ↗
22. T. Seeger and P. Heuler, “Generalized application of Neuber’s rule,” J. Test. Eval., No. 8, 199–204 (1980).10.1520/JTE11613J ↗
23. K. Heckel, “A method for the calculation of the fatigue life on unnotched and notched specimens loaded with alternating stresses,” in: Proc. Int. Conf. on Mechanical Behavior of Materials, Kyoto (1972), Vol. II, pp. 469–477.
24. M. Knop, R. Jones, L. Molent, and C. Wang, “On the Glinka and Neuber methods for calculating notch tip strains under cyclic load spectra,” Int. J. Fatigue, 22, 743–755 (2000).10.1016/S0142-1123(00)00061-X ↗
25. W. N. Sharpe (Jr) and K. C. Wang, “Evaluation of a modified monotonic Neuber relation,” Trans. ASME, J. Eng. Mater. Technol., 113, 1–8 (1991).10.1115/1.2903378 ↗
26. F. Ellyin and D. Kujawski, “Generalization of notch analysis and its extension to cyclic loading,” Eng. Fract. Mech., 32, 819–826 (1989).10.1016/0013-7944(89)90178-1 ↗
27. K. Molski and G. Glinka, “A method of elastic-plastic stress and strain calculation at a notch root,” Mater. Sci. Eng., 50, 93–100 (1981).10.1016/0025-5416(81)90089-6 ↗
28. G. Glinka, “Energy density approach to calculation of inelastic strain-stress near notch and cracks,” Eng. Fract. Mech., 22, 485–508 (1985).10.1016/0013-7944(85)90148-1 ↗
29. G. Glinka, “Calculation of the inelastic notch-tip strain-stress histories under cyclic loading,” Eng. Fract. Mech., 22, 839–854 (1985).10.1016/0013-7944(85)90112-2 ↗
30. G. Qylafku, Z. Azari, N. Kadi, et al., “Application of a new model proposal for fatigue life prediction on notches and key-seats,” Int. J. Fatigue, 21, No. 8, 753–760 (1999).10.1016/S0142-1123(99)00046-8 ↗
31. G. Glinka, W. Ott, and H. Nowack, “Elastoplastic plane strain analysis of stresses and strains at the notch root,” Trans. ASME, J. Eng. Mater. Technol., 110, No. 3, 195–204 (1988).10.1115/1.3226037 ↗
32. N. A. Makhutov, V. Yu. Barmas, and O. A. Levin, “Theoretical estimate of limiting states in stress concentration zones under low-cycle loading with temperature–time effects,” Strength Mater., 13, No. 8, 943–946 (1981).10.1007/BF00762157 ↗
33. C. E. Feltner and J. Morrow, “Microplastic strain hysteresis energy as a criterion for fatigue fracture,” Trans. ASME, J. Basic Eng., No. 1, 15–22 (1961).
34. D. Ye, S. Matsuoka, N. Suzuki, and Y. Naeda, “Farther investigation of Neuber’s rule and the equivalent strain energy density [ESED] method,” Int. J. Fatigue, 26, No. 5, 447–455 (2004).10.1016/j.ijfatigue.2003.10.002 ↗
35. V. T. Troshchenko, L. A. Khamaza, and Yu. D. Mishchenko, “Fatigue strength of notched specimens with regard for cyclic plastic strains,” Strength Mater., 10, No. 4, 381–385 (1978).10.1007/BF01523784 ↗
36. P. A. Fomichev, “Calculation of stress and strain gradients in the concentration zone in cyclic elastoplastic deformation. Part 1,” Strength Mater., 21, No. 9, 1241–1244 (1989).10.1007/BF01529305 ↗
37. P. Forrest, Fatigue of Metals, Pergamon Press, Oxford (1962).
38. I. I. Ishchenko, A. D. Pogrebnyak, and B. N. Sinaiskii, The Influence of High Temperatures on Fatigue Strength of Heat-Resistant Steels and Alloys [in Russian], Naukova Dumka, Kiev (1979).
39. V. T. Troshchenko and L. A. Khamaza, “Influence of inelastic strains on the fatigue limit of metais during bending,” Strength Mater., 8, No. 4, 387–392 (1976).10.1007/BF01528090 ↗
40. S. I. Ratner, Failure under Repeated Loading [in Russian], Oborongiz, Moscow (1959).
41. M. Kawamoto and K. Nishioka, “Researches on the fatigue under consideration of the phenomenon of elastic hysteresis,” Mem. Fac. Eng. Kyoto Univ., 27, No. 1, 7–29 (1965).
42. V. T. Troshchenko and L. F. Shestopal, “On the fatigue strength criteria for metals,” Strojnicky Casopis, No. 1, 4–16 (1974).
43. C. Berger, K.-G. Eulitz, P. Heuler, et al., “Betriebsfestigkeit in Germany – an overwiew,” Int. J. Fatigue, 24, 603–625 (2002).10.1016/S0142-1123(01)00180-3 ↗
44. E. Siebel and M. Stieler, “Dissimilar stress distributions and cyclic loading,” Z. Ver. Deutsch. Ing., 97, 121–131 (1955).
45. V. T. Troshchenko and A. F. Getman, “Investigation of the bending fatigue strength of certain alloys with stress concentration,” Strength Mater., 6, No. 7, 798–804 (1974).10.1007/BF01528317 ↗
46. C. Massonet, “The effect of size, shape and grain size on the fatigue strength of medium carbon steel,” Proc. ASTM, 56, 954–978 (1956).
47. R. B. Holzman, “Vliv nehomogenni napjatosti na mezni stav pri cyklickem zatezavani,” Strojnicky Casopis, No. 5, 419–442 (1964).
48. H. Nisitani, “Correlation between notch sensitivity of a material and its non-propagating crack, under rotating bending stress,” in: Mechanical Behavior of Materials, The Society of Materials Science, Kyoto (1972), Vol. II, pp. 312–322.
49. M. Ciavarella and G. Meneghetti, “On fatigue limit in the presence of notches: classical vs. recent unified formulations,” Int. J. Fatigue, 26, No. 3, 284–298 (2004).10.1016/S0142-1123(03)00106-3 ↗
50. O. P. Ostash, V. V. Panasyuk, and E. M. Kostyk, “A unified model of initiation and growth of fatigue macrocracks. Pt. 1. The application of force parameters of fracture mechanics at the crack initiation stage,” Fiz.-Khim. Mekh. Mater., No. 1, 7–21 (1998).
51. O. P. Ostash, V. V. Panasyuk, and E. M. Kostyk, “A unified model of initiation and growth of fatigue macrocracks. Pt. 2. The application of strain parameters of fracture mechanics at the crack initiation stage,” Fiz.-Khim. Mekh. Mater., No. 3, 55–66 (1998).
52. O. P. Ostash, V. V. Panasyuk, and E. M. Kostyk, “A unified model of initiation and growth of fatigue macrocracks. Pt. 3. The macrocrack growth stage,” Fiz.-Khim. Mekh. Mater., No. 3, 5–14 (1999).
53. B. Atzori, P. Lazzarin, and G. Meneghetti, “Fracture mechanics and notch sensitivity,” Fatigue Fract. Eng. Mater. Struct., 26, No. 7, 257–267 (2003).10.1046/j.1460-2695.2003.00633.x ↗
54. P. Lazzarin, R. Tovo, and G. Meneghetti, “Fatigue crack initiation and propagation phases near notches in metals with low notch sensitivity,” Int. J. Fatigue, 27, No. 8-9, 647–657 (1997).10.1016/S0142-1123(97)00091-1 ↗
55. P. Kuhn and H. F. Hardrath, An Engineering Method for Estimating Notch-Size Effect in Fatigue Tests on Steel, NASA Tech. Note 2805 (1952).