Micromechanics of stress transfer in shape memory alloy reinforced three-phase composites

Due to the weak interface in shape memory alloy wire–reinforced composites, the influence of interphase on the mechanical properties and stress distribution of hybrid composites is of considerable importance. In this article, a three-cylinder axisymmetric model using a pull-out test is developed to predict stress transfer and interfacial behavior between shape memory alloy wire, interphase, and matrix. In this article, only superelasticity behavior of the shape memory alloy wire is considered. Based on the stress function method and the principle of minimum complementary energy, stress distribution is derived for three different cases in terms of loading and boundary conditions (thermal loading model, intact model, and partially debonded model). Inhomogeneous interphase and different radial and hoop stress components in each phase are considered to achieve deeper physical understanding. Finite element analysis also performed to simulate stress transfer from the wire to the matrix through the interphase. To evaluate the accuracy of this model, the results of the work are compared with the results of the two-cylinder model proposed by Wang et al. and finite element results.