journal article·2004-02

Improved Current and Charge Amplifiers for Driving Piezoelectric Loads, and Issues in Signal Processing Design for Synthesis of Shunt Damping Circuits

A. J. Fleming, S. O. R. Moheimani

Publisher page

Abstract

Piezoelectric transducers are known to exhibit less hysterisis when driven with current or charge rather than voltage. Despite this advantage, such methods have found little practical application due to the poor low-frequency response of present current and charge driver designs. This paper introduces the compliance feedback current driver containing a secondary voltage feedback loop to prevent DC charging of capacitive loads and to compensate for any voltage or current offsets within the circuit. Low-frequency bandwidths in the milli-Hertz range can be achieved. One application for such a device is the synthesis of piezoelectric shunt damping circuits. A number of block diagram transformations are presented to simplify the realization of analog or digital admittance transfer functions from aschematic circuit diagram.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aeroelasticity and Vibration Control · Piezoelectric Actuators and Control · Advanced MEMS and NEMS Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Electrical Engineering and Computer Science, University of Newcastle, Australia

References (35)

Show source-provided references
1. 10.1109/3516.89104410.1109/3516.891044 ↗
2. Behrens, S. and Moheimani, S.O.R. 2002. ‘‘Current Flowing Multiple Mode Piezoelectric Shunt Dampener,’’ In: Proc. SPIE Smart Materials and Structures, March. San Diego, CA, Paper No. 4697-24, pp. 217–226 .10.1117/12.472658 ↗
3. Behrens, S., Moheimani, S.O.R. and Fleming, A.J. December 2002. ‘‘Multiple Mode Passive Piezoelectric Shunt Dampener,’’ In Proc. IFAC Mechatronics 2002, Berkerley, CA.10.1016/S1474-6670(17)33935-6 ↗
4. 10.1088/0964-1726/12/1/30310.1088/0964-1726/12/1/303 ↗
5. Chandrasekaran, S., Lindner, D.K. and Smith, R.C. November 2000. ‘‘Optimized Design of Switching Amplifiers for Piezoelectric Actuators,’’ Journal of Intelligent Material Systems and Structures, 11: 887–901 .10.1106/XFC7-PD82-LDFC-T2R9 ↗
6. Comstock, R. 1981. ‘‘Charge Control of Piezoelectric Actuators to Reduce Hysteresis Effects,’’ Japan Journal of Applied Physics, Part 2 – Letters.
7. 10.1088/0964-1726/11/3/30710.1088/0964-1726/11/3/307 ↗
8. Croft, D., Shedd, G. and Devasia, S. 2000. ‘‘Creep, Hysteresis and Vibration Compensation for Piezoactuators: Atomic Force Microscopy Application,’’ In: Proc. American Control Conference, June, Chicago, Illinois, pp. 2123–2128 .10.1109/ACC.2000.879576 ↗
9. 10.1109/87.89674210.1109/87.896742 ↗
10. 10.1177/1045389X920030010910.1177/1045389X9200300109 ↗
11. Fleming, A. J. and Moheimani, S.O.R. 2002. ‘‘Adaptive Piezoelectric Shunt Damping,’’ In: Proc. SPIE Smart Structures and Materials 2003 – Modeling, Signal Processing, and Control, March, San Diego, CA USA, Paper No. 4693, pp. 556–567 .10.1117/12.475253 ↗
12. 10.1049/el:2000108310.1049/el:20001083 ↗
13. Fleming, A.J., Behrens, S. and Moheimani, S.O.R. December 2000b. ‘‘Innovations in Piezoelectric Shunt Damping,’’ In: Proc. SPIE: Symposium on Smart Materials and MEM’s, Smart Structures and Devices, SPIE Vol. 4326, Melbourne, Australia.
14. 10.1109/3516.99089110.1109/3516.990891 ↗
15. Furutani, K., Urushibata, M. and Mohri, N. May 1998. ‘‘Improvement of Control Method for Piezoelectric Actuator by Combining Charge Feedback with Inverse Transfer Function Compensation,’’ In: Proc. IEEE International Conference on Robotics and Automation, Leuven, Belgium, pp. 1504–1509 .10.1109/ROBOT.1998.677325 ↗
16. 10.1109/87.49119510.1109/87.491195 ↗
17. 10.1016/0022-460X(91)90762-910.1016/0022-460X(91)90762-9 ↗
18. 10.1177/1045389X900010030510.1177/1045389X9000100305 ↗
19. 10.1177/1045389X940050010610.1177/1045389X9400500106 ↗
20. Horowitz, P. and Hill, W. 1980. The Art of Electronics, Cambridge University Press, Cambridge .
21. IEEE Standard on Piezoelectricity. ANSI/IEEE standard 176–1987, 1987.
22. Jaffe, B., Cook, W.R. and Jaffe, H. 1971. Piezoelectric Ceramics, Academic Press, St. Louis, MO, USA .10.1016/B978-0-12-379550-2.50015-6 ↗
23. Kailath, T. Linear Systems, Prentice-Hall, Upper Saddle River, NJ 07458.
24. 10.1143/JJAP.27.L77310.1143/JJAP.27.L773 ↗
25. 10.2514/3.2150610.2514/3.21506 ↗
26. Mayergoyz, I.D. 1991. Mathematical Models of Hysteresis, Springer Verlag, New York .10.2172/6911694 ↗
27. Mohan, N., Undeland, T.M. and Robbins, W.P. 1995. Power Electronics: Converters, Applications, and Design, Wiley, New York .
28. 10.1049/el:2001102710.1049/el:20011027 ↗
29. Moheimani, S.O.R., Fleming, A.J. and Behrens, S. July 2002. ‘‘On the Feedback Structure of Wideband Piezoelectric Shunt Damping Systems,’’ In: Proc. IFAC World Congress, arcelona, Spain.10.3182/20020721-6-ES-1901.01475 ↗
30. 10.1049/el:1982030110.1049/el:19820301 ↗
31. 10.1177/1045389012214543810.1177/10453890122145438 ↗
32. Stansfield, D. 1991. Underwater Electroacoustic Transducers, Bath University Press and Institute of Acoustics, Bath, UK .
33. Van Valkenburg, M.E. 1982. Analog Filter Design, CBS College Publishing, New York, NY, USA .
34. Wu, S.Y. March 1999. ‘‘Multiple PZT Transducers Implemented with Multiple-mode Piezoelectric Shunting for Passive Vibration Damping,’’ In: Proc. SPIE Smart Structures and Materials, Passive Damping and Isolation, SPIE Vol. 3672. Huntington Beach, CA, pp. 112–122 .10.1117/12.349774 ↗
35. Wu, S.Y. and Bicos, A.S. March 1997. ‘‘Structural Vibration Damping Experiments Using Improved Piezoelectric Shunts,’’ In: Proc. SPIE Smart Structures and Materials, Passive Damping and Isolation, SPIE Vol. 3045, pp. 40–50 .10.1117/12.274217 ↗