Thermomechanical characterization of phase transformation surfaces for thin SMA wires

The phase transformation of thermal shape memory alloys (SMAs) can be described by surfaces in a temperature-stress-strain space. A novel experimental technique for the thermomechanical characterization of thin SMA wires allows to scan these surfaces with high resolution. Each experimental run uses a sequence of experimental conditions to traverse the phase transformation surfaces on a different path from “full martensite” to “full austenite” and vice versa. At all times, stress and strain are kept within the limits specified for the use of the SMA wire in actuators. The wire is heated externally through a silicon oil bath, which ensures a controlled and homogeneous temperature of the specimen. The experimental setup is designed to minimize the impact of the large oil temperature variations on measurement results. Experimental results are shown for both mechanical contraction and electrical resistance, each of which forms consistent surfaces for the phase transformation. Measurements for external heating in the oil bath are compared to electrical heating in air.