journal article·2016-01

Pullout resistance of deformed shape memory alloy fibers embedded in cement mortar

Dong Joo Kim, Hee Ae Kim, Young-Soo Chung, Eunsoo Choi

Publisher page

Abstract

In this study, the pullout resistance of deformed shape memory alloy fibers embedded in a mortar matrix is investigated to develop self crack-closing capacity. Three types of deformed shape memory alloy fibers (dog bone–shaped, end-deformed, and crimped) and one type of smooth shape memory alloy fiber, fabricated from two different alloys, NiTi and NiTiNb, were embedded in a mortar matrix with a compressive strength of 55 MPa. The pullout resistance differed considerably depending on the geometry of the fiber and composition of the alloy. The pullout resistance was generally higher for deformed shape memory alloy fibers than for the smooth shape memory alloy fiber. Among the deformed shape memory alloy fibers, dog bone–shaped fibers showed the highest enhancement in bond strength after heat treatment. The pullout resistance was higher for the NiTiNb alloy than the NiTi alloy when the shape memory alloy fiber was deformed, whereas the relationship was reversed when the shape memory alloy fiber was smooth.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Shape Memory Alloy Transformations · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, Sejong University, Seoul, Republic of Korea

Department of Civil Engineering, Chung-Ang University, Seoul, Republic of Korea

Department of Civil Engineering, Hongik University, Seoul, Republic of Korea

References (23)

Show source-provided references
1. 10.3151/jact.8.17110.3151/jact.8.171 ↗
2. Alwan JM · Concrete Science and Engineering Journal · 1999 · 1 · 15
3. 10.1088/0964-1726/19/3/03502410.1088/0964-1726/19/3/035024 ↗
4. 10.1088/0964-1726/17/6/06503210.1088/0964-1726/17/6/065032 ↗
5. Edvardson C · ACI Materials Journal · 1999 · 96 · 448
6. 10.3151/jact.7.21710.3151/jact.7.217 ↗
7. 10.1007/BF0247955010.1007/BF02479550 ↗
8. Kim DJ · 2007 · 67
9. 10.3390/ma701050810.3390/ma7010508 ↗
10. 10.1016/j.compositesb.2014.08.01810.1016/j.compositesb.2014.08.018 ↗
11. Krstulovic-Opara N · ACI Structural Journal · 2000 · 97 · 335
12. Krstulovic-Opara N · ACI Materials Journal · 2000 · 97 · 297
13. 10.1088/0964-1726/17/2/02502010.1088/0964-1726/17/2/025020 ↗
14. Li M · ACI Materials Journal · 2011 · 108 · 333
15. 10.1061/(ASCE)0733-9399(1998)124:10(1121)10.1061/(ASCE)0733-9399(1998)124:10(1121) ↗
16. 10.1007/BF0247955110.1007/BF02479551 ↗
17. 10.1016/j.cemconcomp.2009.03.00310.1016/j.cemconcomp.2009.03.003 ↗
18. 10.1016/j.cemconcomp.2010.07.01510.1016/j.cemconcomp.2010.07.015 ↗
19. 10.1016/j.cemconcomp.2012.08.01310.1016/j.cemconcomp.2012.08.013 ↗
20. 10.2320/matertrans.47.58010.2320/matertrans.47.580 ↗
21. 10.1016/S1065-7355(96)90079-610.1016/S1065-7355(96)90079-6 ↗
22. 10.1016/j.cemconres.2009.01.01310.1016/j.cemconres.2009.01.013 ↗
23. 10.1016/j.cemconres.2010.11.00210.1016/j.cemconres.2010.11.002 ↗