Nondimensional characterization of flow-mode magnetorheological/electrorheological fluid dampers
Source abstract
Abstract
Magnetorheological/electrorheological dampers are complex devices and involve a large set of important material and geometric variable with mutual interactions between them. As such, reliable predictions of the damping force level in these devices are difficult to achieve. However, meaningful results can be obtained with significantly less effort through nondimensional parameters involving all key variables. Therefore, the goal of this study was to propose a robust set of nondimensional parameters for the purpose of modeling of magnetorheological/electrorheological dampers (and other flow-mode devices) as well as the characterization of data from experiments with magnetorheological/electrorheological devices. The proposed scheme employs five parameters characterizing the contribution of flow inertia, viscosity, and yield stress, as well as shear thinning/thickening effects to the damping force output of magnetorheological/electrorheological valves. It is the result of analysis of several constitutive models of non-Newtonian fluid models (Bingham plastic model, biviscous model, biplastic Bingham model, and Herschel–Bulkley model). Specifically, the goal was to derive analytical (exact) formulae for pressure gradient of all examined models excluding the Herschel–Bulkley model. In the Herschel–Bulkley model, the nondimensional relationship between pressure gradient and flow rate is given in a power-law form, and the analytical (exact) solution cannot be obtained. Prior art included analytical (exact) solutions for the Bingham plastic model only. In the most generic form, the expressions can be useful for designing magnetorheological/electrorheological flow-mode devices. Exemplary calculations of the damping force output are presented in this article for a custom single-gap magnetorheological piston. The piston contains a semi-bypass feature in the annulus to allow for low-breakaway forces at near-zero piston velocity inputs. The steady-state calculations are presented for two exemplary damper units, and the model is validated against experimental data. Finally, the expressions allow one to easily characterize flow data into separate regimes of damper operation by means of the proposed scheme.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Vibration Control and Rheological Fluids · Seismic Performance and Analysis · Hydraulic and Pneumatic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
BWI Group, Technical Center, Kraków, Poland
Department of Process Control, AGH University of Science and Technology, Kraków, Poland
References (23)
Show source-provided references
1. Browne AL, Johnson NL, Wereley NM, (2011) Method of designing magnetorheological fluid energy absorbing device using hydromechanical analysis. US Patent 7930150 B2.
2. 10.1117/12.38884710.1117/12.388847 ↗
3. Foister RT, Nehl TW, Kruckemeyer WC, (2011) Magnetorheological (MR) piston assembly with primary and secondary channels to improve MR damper force. US Patent application 20110100775.
4. 10.1016/0377-0257(84)80053-110.1016/0377-0257(84)80053-1 ↗
5. 10.1106/8398-U3X9-DHK9-K30410.1106/8398-U3X9-DHK9-K304 ↗
6. 10.1115/1.282334810.1115/1.2823348 ↗
7. Goncalves FD (2005) Characterizing the behavior of magnetorheological fluids at high velocities and high shear rates. PhD Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA.10.1142/9789812702197_0061 ↗
8. 10.1243/0954407036072943710.1243/09544070360729437 ↗
9. 10.1016/j.jsv.2005.01.04910.1016/j.jsv.2005.01.049 ↗
10. 10.1177/1045389X0708294910.1177/1045389X07082949 ↗
11. 10.1177/1045389X990100010210.1177/1045389X9901000102 ↗
12. Kruckemeyer WC, Jensen EL, Longhouse RE, (2001) Magnetorheological fluid damper tunable for smooth transitions. US Patent 6318519.10.1016/S1471-3918(01)80161-1 ↗
13. 10.1088/0964-1726/5/5/00810.1088/0964-1726/5/5/008 ↗
14. Phillips RW (1969) Engineering applications of fluids with a variable yield stress. PhD Thesis, University of California, Berkeley, CA.
15. Ravana RV · 2006
16. 10.1088/0964-1726/5/4/01110.1088/0964-1726/5/4/011 ↗
17. 10.1088/0964-1726/20/2/02300110.1088/0964-1726/20/2/023001 ↗
18. Wang X · 2000 · 3989 · 232
19. 10.1177/1045389X0708810710.1177/1045389X07088107 ↗
20. 10.1088/0964-1726/7/5/01510.1088/0964-1726/7/5/015 ↗
21. 10.1088/0964-1726/13/4/01210.1088/0964-1726/13/4/012 ↗
22. 10.1016/0377-0257(93)80052-D10.1016/0377-0257(93)80052-D ↗
23. Yang G (2001) Large-scale magnetorheological fluid damper for vibration mitigation: modeling, testing and control. PhD Thesis, Notre Dame University, Notre Dame, IN.