GeP3/Ketjen Black Composite: Preparation via Ball Milling and Performance as Anode Material for Sodium-ion Batteries
Source abstract
Abstract
Metal phosphides have been studied as prospective anode materials for sodium-ion batteries (SIBs) due to their higher specific capacity compared to other anode materials.However, rapid capacity decay and limited cycle life caused by volume expansion and low electrical conductivity of phosphides in SIBs remain still unsolved.To address these issues, GeP 3 was first prepared by high-energy ball milling, and then Ketjen black (KB) was introduced to synthesize composite GeP 3 /KB anode materials under controlled milling speed and time by a secondary ball milling process.During the ball milling process, GeP 3 and KB form strong chemical bonds, resulting in a closely bonded composite.Consequently, the GeP 3 /KB anodes was demonstrated excellent sodium storage performance, achieving a high reversible capacity of 933.41 mAhg -1 at a current density of 0.05 Ag -1 for a special formula of GeP 3 /KB-600-40 sample prepared at ball milling speed of 600 r/min for 40 h.Even at a high current density of 2 Ag -1 over 200 cycles, the capacity remains 314.52 mAhg -1 with a retention rate of 66.6%.In conclusion, this work successfully prepares GeP 3 /KB anode-carbon composite for electrodes by high-energy ball milling, which can restrict electrode volume expansion, enhance capacity, and improve cycle stability of SIBs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. ZHANG H, HASA I, PASSERINI S. Beyond insertion for Na-ion batteries: nanostructured alloying and conversion anode materials. Advanced Energy Materials, 2018, 8(17): 40.10.1002/aenm.201702582 ↗
2. ZHOU J H, SHI Q T, ULLAH S, et al. Phosphorus-based composites as anode materials for advanced alkali metal ion batteries. Advanced Functional Materials, 2020, 30(49): 19.10.1002/adfm.202004648 ↗
3. GUO J Z, GU Z Y, DU M, et al. Emerging characterization techniques for delving polyanion-type cathode materials of sodium-ion batteries. Materials Today, 2023, 66: 221.10.1016/j.mattod.2023.03.020 ↗
4. DU M, DU K D, GUO J Z, et al. Direct reuse of oxide scrap from retired lithium-ion batteries: advanced cathode materials for sodium-ion batteries. Rare Metals, 2023, 42(5): 1603.10.1007/s12598-022-02230-8 ↗
5. DING C S, CHEN Z, CAO C X, et al. Advances in Mn-based electrode materials for aqueous sodium-ion batteries. Nano-Micro Letters, 2023, 15(1): 42.10.1007/s40820-023-01162-x ↗
6. CHEN F Z, XU J, WANG S Y, et al. Phosphorus/phosphide-based materials for alkali metal-ion batteries. Advanced Science, 2022, 9(17): 25.10.1002/advs.202200740 ↗
7. FU Y Q, WEI Q L, ZHANG G X, et al. Advanced phosphorus- based materials for lithium/sodium-ion batteries: recent developments and future perspectives. Advanced Energy Materials, 2018, 8(13): 28.10.1002/aenm.201702849 ↗
8. WU S M, YANG W, LIU Z T, et al. Organic polymer coating induced multiple heteroatom-doped carbon framework confined Co1-xS@NPSC core-shell hexapod for advanced sodium/potassium ion batteries. Journal of Colloid and Interface Science, 2024, 660: 97.10.1016/j.jcis.2024.01.085 ↗
9. HWANG J Y, MYUNG S T, SUN Y K. Sodium-ion batteries: present and future. Chemical Society Reviews, 2017, 46(12): 3529.10.1039/C6CS00776G ↗
10. NAYAK P K, YANG L T, BREHM W, et al. From lithium-ion to sodium-ion batteries: advantages, challenges, and surprises. Angewandte Chemie International Edition, 2018, 57(1): 102.10.1002/anie.201703772 ↗
11. ZENG L C, HUANG L C, ZHU J H, et al. Phosphorus-based materials for high-performance alkaline metal ion batteries: progress and prospect. Small, 2022, 18(39): 26.10.1002/smll.202201808 ↗
12. CHEN L T, LIU Z T, YANG W, et al. Micro-mesoporous cobalt phosphosulfide (Co3S4/CoP/NC) nanowires for ultrahigh rate capacity and ultrastable sodium ion battery. Journal of Colloid and Interface Science, 2024, 666: 416.10.1016/j.jcis.2024.04.044 ↗
13. LIU R, YU L, HE X, et al. Constructing heterointerface of Bi/Bi2S3 with built-in electric field realizes superior sodium-ion storage capability. eScience, 2023, 3(4):100138.10.1016/j.esci.2023.100138 ↗
14. WANG L Z, LI Q M, CHEN Z Y, et al. Metal phosphide anodes in sodium-ion batteries: latest applications and progress. Small, 2024, 20(26): 2310426.10.1002/smll.202310426 ↗
15. LIU J F, WANG S T, KRAVCHYK K, et al. SnP nanocrystals as anode materials for Na-ion batteries. Journal of Materials Chemistry A, 2018, 6(23): 10958.10.1039/C8TA01492B ↗
16. LI Q F, YANG D, CHEN H L, et al. Advances in metal phosphides for sodium-ion batteries. SusMat, 2021, 1(3): 359.10.1002/sus2.19 ↗
17. SONG H, EOM K. Overcoming the unfavorable kinetics of Na3V2(PO4)2F3//SnPx full-cell sodium-ion batteries for high specific energy and energy efficiency. Advanced Functional Materials, 2020, 30(31): 9.10.1002/adfm.202003086 ↗
18. LI W W, LI H Q, LU Z J, et al. Layered phosphorus-like GeP5: a promising anode candidate with high initial Coulombic efficiency and large capacity for lithium ion batteries. Energy & Environmental Science, 2015, 8(12): 3629.10.1039/C5EE02524A ↗
19. KIM D, ZHANG K, LIM J M, et al. GeP3 with soft and tunable bonding nature enabling highly reversible alloying with Na ions. Materials Today Energy, 2018, 9: 126.10.1016/j.mtener.2018.05.005 ↗
20. YANG F H, HONG J, HAO J N, et al. Ultrathin few-layer GeP nanosheets via lithiation-assisted chemical exfoliation and their application in sodium storage. Advanced Energy Materials, 2020, 10(14): 8.10.1002/aenm.201903826 ↗
21. GU Z Y, WANG X T, HENG Y L, et al. Prospects and perspectives on advanced materials for sodium-ion batteries. Science Bulletin, 2023, 68(20): 2302.10.1016/j.scib.2023.08.038 ↗
22. SUI S M, XIE H, CHEN B, et al. Highly reversible sodium-ion storage in a bifunctional nanoreactor based on single-atom Mn supported on N-doped carbon over MoS2 nanosheets. Angewandte Chemie International Edition, 2024, 63(43): e202411255.10.1002/ange.202411255 ↗
23. CHANG Q Q, JIN Y H, JIA M, et al. Sulfur-doped CoP@nitrogen-doped porous carbon hollow tube as an advanced anode with excellent cycling stability for sodium-ion batteries. Journal of Colloid and Interface Science, 2020, 575: 61.10.1016/j.jcis.2020.04.096 ↗
24. SHI S S, SUN C L, YIN X P, et al. FeP quantum dots confined in carbon-nanotube-grafted P-doped carbon octahedra for high-rate sodium storage and full-cell applications. Advanced Functional Materials, 2020, 30(10): 9.10.1002/adfm.201909283 ↗
25. QI W, ZHAO H H, WU Y, et al. Facile synthesis of layer structured GeP3/C with stable chemical bonding for enhanced lithium-ion storage. Scientific Reports, 2017, 7: 7.10.1038/srep43582 ↗
26. ZHAO W X, MA X Q, WANG G Z, et al. Carbon-coated CoP3 nanocomposites as anode materials for high-performance sodium-ion batteries. Applied Surface Science, 2018, 445: 167.10.1016/j.apsusc.2018.03.126 ↗
27. LIU J, YAO M, WU A M, et al. Inverse capacity growth and progressive lithiation of SnP-semifilled carbon nanotubes anodes. Applied Surface Science, 2021, 568: 10.10.1016/j.apsusc.2021.150844 ↗
28. ZHANG C F, PARK G, LEE B J, et al. Self-templated formation of fluffy graphene-wrapped Ni5P4 hollow spheres for Li-ion battery anodes with high cycling stability. ACS Applied Materials & Interfaces, 2021, 13(20): 23714.10.1021/acsami.1c03696 ↗
29. OUYANG L Z, GUO L N, CAI W H, et al. Facile synthesis of Ge@FLG composites by plasma assisted ball milling for lithium ion battery anodes. Journal of Materials Chemistry A, 2014, 2(29): 11280.10.1039/C4TA01267D ↗
30. NAM K H, JEON K J, PARK C M. Layered germanium phosphide-based anodes for high-performance lithium- and sodium-ion batteries. Energy Storage Materials, 2019, 17: 78.10.1016/j.ensm.2018.07.026 ↗
31. WANG T, ZHANG K, PARK M, et al. Highly reversible and rapid sodium storage in GeP3 with Synergistic effect from outside-in optimization. ACS Nano, 2020, 14(4): 4352.10.1021/acsnano.9b09869 ↗
32. WANG R, MO H X, LI S, et al. Influence of conductive additives on the stability of red phosphorus-carbon anodes for sodium-ion batteries. Scientific Reports, 2019, 9: 6.10.1038/s41598-018-36797-z ↗
33. ZHANG Z X, LI S Q, GAO S L, et al. Sn/P@G-CNTs composites as high-performance anode materials for sodium-ion batteries. Electrochimica Acta, 2021, 388: 9.10.1016/j.electacta.2021.138532 ↗
34. LEE J, KIM K H, KIM H H, et al. NiP2/C nanocomposite as a high performance anode for sodium ion batteries. Electrochimica Acta, 2022, 403: 11.10.1016/j.electacta.2021.139686 ↗
35. WU X, ZHAO W, WANG H, et al. Enhanced capacity of chemically bonded phosphorus/carbon composite as an anode material for potassium-ion batteries. Journal of Power Sources, 2018, 378: 460.10.1016/j.jpowsour.2017.12.077 ↗
36. HAGHIGHAT-SHISHAVAN S, NAZARIAN-SAMANI M, NAZARIAN-SAMANI M, et al. Strong, persistent superficial oxidation-assisted chemical bonding of black phosphorus with multiwall carbon nanotubes for high-capacity ultradurable storage of lithium and sodium. Journal of Materials Chemistry A, 2018, 6(21): 10121.10.1039/C8TA02590H ↗
37. BOMMIER C, JI X L. Electrolytes, SEI formation, and binders: a review of nonelectrode factors for sodium-ion battery anodes. Small, 2018, 14(16): 20.10.1002/smll.201703576 ↗
38. LIANG M, XIE H N, CHEN B, et al. High-pressure-field induced synthesis of ultrafine-sized high-entropy compounds with excellent sodium-ion storage. Angewandte Chemie International Edition, 2024, 63(27): 11.10.1002/anie.202401238 ↗
39. ZENG T B A, FENG D, LIU Q, et al. Boosting cyclability performance of GeP anode via in-situ generation of free expansion volume. Journal of Alloys and Compounds, 2021, 883: 9.10.1016/j.jallcom.2021.160857 ↗