2D-SiCf/SiC Interlaminar Mode I Fracture Testing and Characterization
Source abstract
Abstract
师维刚 1,3,4 , 张 超 1,2,3 , 李 玫 1,3 , 王 晶 3 , 张程煜 1,2,3 (1.西北工业大学 材料学院 NPU-SAS 联合研究中心，西安 710072；2.西北工业大学 极端力学研究院, 西安 710072；3.西 北工业大学 材料学院，西安 710072;4.西安科技大学 理学院 力学系，西安 710600) 摘 要: 二维编织碳化硅纤维增强碳化硅复合材料(2D-SiCf/SiC)在航空领域中得到广泛使用，该材料层间强度低， 使其易萌生层间裂纹，引起分层破坏。
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. ZHANG S Y, LI H J, LI K Z, et al. Interlayer crack extension mode in laminated carbon/carbon composites. Journal of Inorganic Materials, 2002, 17(1):91.
2. CHOI SR, KOWALIK RW. Interlaminar crack growth resistances of various ceramic matrix composites in mode I and mode II loading. Journal Engineer Gas Turbines Power, 2008, 130: 031301.10.1115/1.2800349 ↗
3. 刘韡, 矫桂琼. Z-pin增强陶瓷基复合材料I型应变能释放率. 材料科学与工程学报, 2009, 27(3):381.
4. OJARD G, BARNETT T, DAHLEN M, et al. Mode I interlaminar fracture toughness testing of a ceramic matrix composite. The 34th International Conference & Exposition on Advanced Ceramics and Composites (ICACC), Daytona Beach, Florida, 2010: 195.10.1002/9780470944127.ch20 ↗
5. 陈刘定, 童小燕, 程起有, 等. 平纹编织C/SiC复合材料层间断裂行为试验研究. 机械强度, 2012, 34(1):97.
6. 刘韡, 矫桂琼. Z-pins增强C/SiC复合材料层间I型断裂韧性. 固体力学学报, 2013, 34(5):466.
7. KRAUSE T, TUSHTEV K, KOCH D, et al. Interlaminar mode I crack growth energy release rate of carbon/carbon composites. Engineering Fracture Mechanics, 2013, 100: 38.10.1016/j.engfracmech.2012.07.003 ↗
8. HOFMAN S. Mode I delamination onset in carbon fiber reinforced SiC: double cantilever beam testing and cohesive zone modelling. Engineering Fracture Mechanics, 2017, 182: 506.10.1016/j.engfracmech.2017.05.018 ↗
9. KUMAR R S. Crack-growth resistance behavior of mode-I delamination in ceramic matrix composites. Acta Materialia, 2017, 131: 511.10.1016/j.actamat.2017.04.012 ↗
10. JIANG T, GUAN Z, LI Z, et al. Experimental and numerical study on mode I interlaminar fracture toughness of lightly stitched ceramic-matrix composites. Results in Physics, 2020, 19: 1.10.1016/j.rinp.2020.103422 ↗
11. KUMAR R S. Effects of randomly distributed defects on Mode-I interlaminar fracture of composite materials. Engineering Fracture Mechanics, 2021, 248: 107699.10.1016/j.engfracmech.2021.107699 ↗
12. XU W, DING J, GE J, et al. Determination of mode I interlaminar fracture toughness of C/SiC composite using taped double cantilever beam and J integral. Journal of Applied Mechanics, 2022, 89(2):024501.10.1115/1.4052574 ↗
13. MANSOUR R, MORSCHER G N. Mode I interlaminar fracture behavior of 2D woven ceramic matrix composites. International Journal of Applied Ceramic Technology, 2019, 16(2):735.10.1111/ijac.13117 ↗
14. MAY M. Measuring the rate-dependent mode I fracture toughness of composites-a review. Composites Part A: Applied Science and Manufacturing, 2016, 81: 1.10.1016/j.compositesa.2015.10.033 ↗
15. MANSOUR R, KANNAN M, MORSCHER G N, et al. The Wedge-Loaded Double Cantilever Beam Test: A Friction Based Method for Measuring Interlaminar Fracture Properties in Ceramic Matrix Composites. The 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 9), Toronto, Canada 2017: 273.10.1002/9781119407270.ch27 ↗
16. MANSOUR R, SINGH Y P, KANNAN M, et al. Study of interlaminar fracture properties of ceramic matrix composites at room and elevated temperatures. Turbo Expo: Power for Land. Sea, and Air. American Society of Mechanical Engineers, 2017, 50916: V006T02A009.10.1115/GT2017-65168 ↗
17. SINGH Y P, MANSOUR R, MORSCHER G N. Combined acoustic emission and multiple lead potential drop measurements in detailed examination of crack initiation and growth during interlaminar testing of ceramic matrix composites. Composites Part A: Applied Science and Manufacturing, 2017, 97: 93.10.1016/j.compositesa.2017.03.006 ↗
18. ABDI F, AHMAD J, DORMOHAMMADI S, et al. Development of ASTM Test Standards for the Mode I Interlaminar Fracture Toughness (GIC—Crack Growth Resistance) of Ceramic Matrix Composites. International Gas Turbine Institute, Oslo, Norway, 2018: V006T02A014.10.1115/GT2018-77147 ↗
19. SHI W G, ZHANG C, WANG B, et al. Mode I interlaminar fracture toughness of two-dimensional continuous fiber reinforced ceramic matrix composites using wedge-loaded double cantilever beam method. Composites Part A: Applied Science and Manufacturing, 2023, 168: 107466.10.1016/j.compositesa.2023.107466 ↗
20. KANNINEN M F. An augmented double cantilever beam model for studying crack propagation and arrest. International Journal of Fracture, 1973, 9(1):83.10.1007/BF00035958 ↗
21. ASTM International. Standard test method for mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites:ASTM D5528-13[S]. West Conshohocken, PA: ASTM International, 2013.
22. 胡殿印, 曾雨琪, 张龙, 等. 二维编织SiC/SiC陶瓷基复合材料宏观弹性常数预测及模态试验研究. 推进技术, 2018, 39(2):465.
23. 孙先念, 刘书田. Z-pins几何分布对其增强复合材料双悬臂梁Ⅰ型层间韧性的影响. 复合材料学报, 2007(3): 160.
24. 劳恩. 脆性固体断裂力学. 北京: 高等教育出版社, 2010: 182-200.