High Entropy Oxide Ceramics (MgCoNiCuZn)O: Flash Sintering Synthesis and Properties
Source abstract
Abstract
Flash sintering is a sintering technology coupled with temperature field and electric field, with characteristics of rapid mass transfer at low temperature, showing significant advantages in the synthesis of high entropy ceramics. In this study, relatively dense high entropy oxide ceramic (MgCoNiCuZn)O was synthesized by flash sintering, which properties were compared with those of conventional sintered samples. Under flash sintering condition of room temperature, the electric field intensity of 50 V/cm and the current density of 300 mA/mm 2 , the time of phase transformation is only 10 s. The maximum relative density of flash sintered sample is 94%, which is 22.8% higher than that of conventional sintered sample. The maximum hardness of flash sintered sample is 5.05 GPa, which is 3.95 GPa higher than that of conventional sintered sample. When the frequency is lower than 2 Hz, the dielectric constant of flash sintering sample is one order of magnitude higher than that of conventional sintered sample. The property improvement of flash sintered samples is attributed to the acceleration of mass transfer by the critical electric 37 field to increase the material density, and the extra defects introduced by the critical electric field.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal Expansion and Ionic Conductivity · Ferroelectric and Piezoelectric Materials · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. XIANG H, XING Y, DAI F, et al. High-entropy ceramics: present status, challenges, and a look forward. Journal of Advanced Ceramics, 2021, 10: 385-441.10.1007/s40145-021-0477-y ↗
2. ROST C M, SACHET E, BORMAN T, et al. Entropy-stabilized oxides. Nature Communications, 2015, 6: 8485.10.1038/ncomms9485 ↗
3. WANG Q, SARKAR A, LI Z, et al. High entropy oxides as anode material for Li-ion battery applications: a practical approach. Electrochemistry Communications, 2019, 100: 121-125.10.1016/j.elecom.2019.02.001 ↗
4. BĖRARDAN D, FRANGER S, DRAGOE D, et al. Colossal dielectric constant in high entropy oxides. Physica Status Solidi (RRL)- Rapid Research Letters, 2016, 10: 328-333.10.1002/pssr.201600043 ↗
5. BĖRARDAN D, FRANGER S, MEENA A K, et al. Room temperature lithium superionic conductivity in high entropy oxides. Journal of Materials Chemistry A, 2016, 4: 9536-9541.10.1039/C6TA03249D ↗
6. QIU N, CHEN H, YANG Z, et al. A high entropy oxide (Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O) with superior lithium storage performance. Journal of Alloys and Compounds, 2019, 777: 767-774.10.1016/j.jallcom.2018.11.049 ↗
7. CHEN J, LIU W, LIU J, et al. Stability and compressibility of cation-doped high-entropy oxide MgCoNiCuZnO5. The Journal of Physical Chemistry C, 2019, 123: 17735-17744.10.1021/acs.jpcc.9b04992 ↗
8. BRAUN J L, ROST C M, LIM M, et al. Charge-induced disorder controls the thermal conductivity of entropy-stabilized oxides. Adv. Mater., 2018, 30: e1805004.10.1002/adma.201805004 ↗
9. HONG W, CHEN F, SHEN Q, et al. Microstructural evolution and mechanical properties of (Mg,Co,Ni,Cu,Zn)O high-entropy ceramics. Journal of the American Ceramic Society, 2019, 102: 2228-2237.10.1111/jace.16075 ↗
10. CHEN H, LIN W, ZHANG Z, et al. Mechanochemical synthesis of high entropy oxide materials under ambient conditions: dispersion of catalysts via entropy maximization. ACS Materials Letters, 2019, 1: 83-88.10.1021/acsmaterialslett.9b00064 ↗
11. CHEN H, FU J, ZHANG P, et al. Entropy-stabilized metal oxide solid solutions as CO oxidation catalysts with high-temperature stability. Journal of Materials Chemistry A, 2018, 6: 11129-11133.10.1039/C8TA01772G ↗
12. DUPUY A D, WANG X, SCHOENUNG J M. Entropic phase transformation in nanocrystalline high entropy oxides. Materials Research Letters, 2018, 7: 60-67.10.1080/21663831.2018.1554605 ↗
13. LIU J, SHAO G, LIU D, et al. Design and synthesis of chemically complex ceramics from the perspective of entropy. Materials Today Advances, 2020, 8: 1-12.10.1016/j.mtadv.2020.100114 ↗
14. LIU D, PENG X, LIU J, et al. Ultrafast synthesis of entropy- stabilized oxide at room temperature. Journal of the European Ceramic Society, 2020, 40: 2504-2508.10.1016/j.jeurceramsoc.2020.01.018 ↗
15. YOON B, AVILA V, RAJ R, et al. Reactive flash sintering of the entropy-stabilized oxide Mg0.2Ni0.2Co0.2Cu0.2Zn0.2O. Scripta Materialia, 2020, 181: 48-52.10.1016/j.scriptamat.2020.02.006 ↗
16. KUMAR A, SHARMA G, AFTAB A, et al. Flash assisted synthesis and densification of five component high entropy oxide (Mg, Co, Cu, Ni, Zn)O at 350 ℃ in 3 min. Journal of the European Ceramic Society, 2020, 40: 3358-3362.10.1016/j.jeurceramsoc.2020.02.036 ↗
17. SARKAR A, DJENADIC R, USHARANI N J, et al. Nanocrystalline multicomponent entropy stabilised transition metal oxides. Journal of the European Ceramic Society, 2017, 37: 747-754.10.1016/j.jeurceramsoc.2016.09.018 ↗
18. PARK J, CHEN I W. In situ thermometry measuring temperature flashes exceeding 1,700 ℃ in 8mol% Y2O3-stablized zirconia under constant-voltage heating. Journal of the American Ceramic Society, 2013, 96: 697-700.10.1111/jace.12176 ↗
19. CHAIM R. On the kinetics of liquid-assisted densification during flash sintering of ceramic nanoparticles. Scripta Materialia, 2019, 158: 88-90.10.1016/j.scriptamat.2018.08.029 ↗
20. REN K, HUANG S, CAO Y, et al. The densification behavior of flash sintered BaTiO3. Scripta Materialia, 2020, 186: 362-365.10.1016/j.scriptamat.2020.05.005 ↗
21. JHA S K, CHARALAMBOUS H, WANG H, et al. In-situ observation of oxygen mobility and abnormal lattice expansion in ceria during flash sintering. Ceramics International, 2018, 44: 15362-15369.10.1016/j.ceramint.2018.05.186 ↗
22. RAJ R. Joule heating during flash-sintering. Journal of the European Ceramic Society, 2012, 32: 2293-2301.10.1016/j.jeurceramsoc.2012.02.030 ↗
23. NARAYAN J. A new mechanism for field-assisted processing and flash sintering of materials. Scripta Materialia, 2013, 69: 107-111.10.1016/j.scriptamat.2013.02.020 ↗
24. ZHANG Y, NIE J, CHAN J M, et al. Probing the densification mechanisms during flash sintering of ZnO. Acta Materialia, 2017, 125: 465-475.10.1016/j.actamat.2016.12.015 ↗
25. JI W, PARKER B, FALCO S, et al. Ultra-fast firing: effect of heating rate on sintering of 3YSZ, with and without an electric field. Journal of the European Ceramic Society, 2017, 37: 2547-2551.10.1016/j.jeurceramsoc.2017.01.033 ↗
26. REN K, WANG Q, LIAN Y, et al. Densification kinetics of flash sintered 3mol% Y2O3 stabilized zirconia. Journal of Alloys and Compounds, 2018, 747: 1073-1077.10.1016/j.jallcom.2018.02.308 ↗
27. COLOGNA M, PRETTE A L G, RAJ R. Flash-sintering of cubic yttria-stabilized zirconia at 750 ℃ for possible use in SOFC manufacturing. Journal of the American Ceramic Society, 2011, 94: 316-319.10.1111/j.1551-2916.2010.04267.x ↗
28. PARK H S, RUDD R E, CAVALLO R M, et al. Grain-size- independent plastic flow at ultrahigh pressures and strain rates. Physical Review Letters, 2015, 114: 065502.10.1103/PhysRevLett.114.065502 ↗
29. LI J, FAN J, YUAN Y, et al. Effect of oscillatory pressure on the sintering behavior of ZrO2 ceramic. Ceramics International, 2020, 46: 13240-13243.10.1016/j.ceramint.2020.02.100 ↗
30. LIU D, ZHANG X, FAN J, et al. Sintering behavior and mechanical properties of alumina ceramics exposed to oscillatory pressure at different sintering stages. Ceramics International, 2021, 47: 23682-23685.10.1016/j.ceramint.2021.05.051 ↗
31. REN K, XIA J, WANG Y. Grain growth kinetics of 3mol% yttria- stabilized zirconia during flash sintering. Journal of the European Ceramic Society, 2019, 39: 1366-1373.10.1016/j.jeurceramsoc.2018.11.032 ↗
32. ZHAO R, HAN D, LU S, et al. Position-sensitive electric property of flash-sintered 3Y-TZP ceramics based on DC bias assisted impedance analysis. Ceramics International, 2022, 48: 2882-2885.10.1016/j.ceramint.2021.09.265 ↗
33. YAO S, LIU D, LIU J, et al. Ultrafast preparation of Al2O3-ZrO2 multiphase ceramics with eutectic morphology via flash sintering. Ceramics International, 2021, 47: 31555-31560.10.1016/j.ceramint.2021.08.034 ↗
34. HOMES C C, VOGT T, SHAPIRO S M, et al. Optical response of high-dielectric-constant perovskite-related oxide. Science, 2001, 293: 673-676.10.1126/science.1061655 ↗
35. 许静. 有机改性SiC晶须/PVDF复合薄膜的制备及介电性能研究. 西安: 西安建筑科技大学硕士学位论文, 2018.
36. LIU D, WANG K, ZHAO K, et al. Creep behavior of zirconia ceramics under a strong DC field. Scripta Materialia, 2022, 214: 114654.10.1016/j.scriptamat.2022.114654 ↗
37. MA B, ZHU Y, WANG K, et al. Microstructure and dielectric property of flash sintered SiO2-coated BaTiO3 ceramics. Scripta Materialia, 2019, 170: 1-5.10.1016/j.scriptamat.2019.05.019 ↗