journal article·2020Open access

Damage Characteristics of 2D C/SiC-ZrC Composites under Low Velocity Impact

PI Huilong, ZHANG Baopeng, YU Xinmin, LIU Wei, JIN Xin

Journal of Inorganic Materials· Volume 35· Issue 12

Abstract

The effects of impact energy on damage characteristics and tensile properties of 2D C/SiC-ZrC composites were studied by low-speed impact, post-impact tensile tests and the CT scanning methods.The results indicated that C/SiC-ZrC composites had a high impact damage tolerance.The damage state of the composites in the energy range of 15-24 J was mainly shown as penetrating damage.When the impact energy increased within the range of 15-24 J, the nominal tensile strength of C/SiC-ZrC composites reduced slowly, with a maximum decrease of around 25%.The impact mainly caused lamination and fiber fracture damage near the impact areas.However, the impact damage was not observed out of the impact areas.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

1. Science and Technology on Thermostructure Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an 710072, China;2. Aerospace Institute of Advanced Materials & Processing Technology, Beijing 100074, China

References (17)

Show source-provided references
1. YANG F Y, ZHANG X H, HAN J C, et al. Ablation mechanism of ZrB2-SiC and Cf/ZrB2-SiC ultra-high temperature ceramic composites. Journal of Inorganic Materials, 2008,23(4):734-738.10.3724/SP.J.1077.2008.00734 ↗
2. SUN T C, YU X M, WANG T, et al. Preparation and anti-ablation property of C/SiC composites modified by zirconium element. Aerospace Materials & Technology, 2015,45(4):35-39.
3. NASLAIN R. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compo. Sci. Technol., 2004,64(2):155-170.
4. 陈华辉, 邓海金, 李明, 等. 现代复合材料. 北京: 中国物资出版社, 1998.
5. BATRA R C, GOPINATH G, ZHENG J Q. Damage and failure in low energy impact of fiber-reinforced polymeric composite laminates. Compos. Struct., 2012,94:540-547.10.1016/j.compstruct.2011.08.015 ↗
6. DONADON V M, IANNUCCI L, FALZON B G, et al. A progressive failure model for composite laminates subjected to low velocity impact damage. Comput. Struct., 2008,86(11/12):1232-1252.10.1016/j.compstruc.2007.11.004 ↗
7. TIBERKAK R, BACHENE M, RECHAK S, et al. Damage prediction in composites plates subjected to low velocity impact. Compos. Struct., 2008,83:73-82.10.1016/j.compstruct.2007.03.007 ↗
8. KIM E H, RIM M S, LEE I, et al. Composite damage model based on continuum damage mechanics and low velocity impact analysis of composite plates. Compos. Struct., 2013,95:123-134.10.1016/j.compstruct.2012.07.002 ↗
9. TRABANDT U, ESSER B, KOCH D, et al. Ceramic matrix composites life cycle testing under reusable launcher environmental conditions. Int. J. Appl. Ceram. Technol., 2005,2(2):150-161.
10. TRABANDT U, FISCHER W, GUELHAN A, et al. Improvement of Lifetime Performance of Removable TPS and Hot Structures. 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, 2006: 1-10.10.2514/6.2006-2949 ↗
11. YAO L J, LI Z S, CHENG Q Y, et al. Damage behavior of 2D C/SiC composites under low velocity impact. Journal of Inorganic Materials, 2010,25(3):311-314.10.3724/SP.J.1077.2010.00311 ↗
12. YAO L J, WANG J S, ZHANG L, et al. Damage characteristics of 2D C/SiC composites under low velocity impact. Journal of Mechanical Strength, 2013,35(2):148-151.
13. CHEN X, LI Y L, ZENG Z, et al. The compressive and tensile behavior of of a 0/90 fiber woven composite at high strain rates. Carbon, 2013,61(5):97-104.10.1016/j.carbon.2013.04.073 ↗
14. XUAN C, LI Y L, SHI C S, et al. The dynamic tensile properties of 2D-C/SiC composites at elevated temperatures. International Journal of Impact Engineering, 2015,79:75-82.10.1016/j.ijimpeng.2014.10.006 ↗
15. LI Y L, SUO T, LIU M S. Influence of the strain rate on the mechanical behavior of the 3D needle-punched C/SiC composites. Materials Science & Engineering A, 2009,507(1):6-12.10.1016/j.msea.2009.01.024 ↗
16. TOU L X, WANG Q C, CHEN G Y. Analysis on low velocity impact performance and damage behavior of carbon fiber composite beam. Journal of Mechanical & Electrical Engineering, 2016,33(7):815-821.
17. CUI H P, WEN W D, CUI H T. Advances of study on low velocity impact damaged and residual strength of composite laminates. Journal of Materials Science & Engineering, 2005,23(3):466-472.