Sintering Behavior of Simulating Core FCM Fuel via Hot Oscillatory Pressing
Source abstract
Abstract
1750 ℃烧结材料的致密度提高得最多; 振荡烧 结试样的晶粒尺寸更小，1850 ℃振荡烧结试样的晶粒尺寸为(284±4) nm，比同等温度下热压烧结试样的晶粒尺寸 减小~27%; 振荡烧结试样的硬度更高，1850℃振荡烧结试样的硬度为 (23.7±0
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Nuclear Materials and Properties · Fuel Cells and Related Materials · Thermal and Kinetic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. KIM H J, KANG E S, KIM Y W, et al. Effects of starting powder on microstructure and thermal conductivity of pressureless-sintered fully ceramic microencapsulated fuels. Journal of the European Ceramic Society, 2023, 43: 783.10.1016/j.jeurceramsoc.2022.11.010 ↗
2. KIM H M, KIM Y W, LIM K Y. Pressureless sintered silicon carbide matrix with a new quaternary additive for fully ceramic microencapsulated fuels. Journal of the European Ceramic Society, 2019, 39: 3971.10.1016/j.jeurceramsoc.2019.06.008 ↗
3. ZHAO K, FENG P, TAN J, et al. A new route to fabricate high- performance binderless tungsten carbide: dynamic sinter forging. Journal of the American Ceramic Society, 2023, 106: 3343.10.1111/jace.19024 ↗
4. LIU D, FAN J, ZHAO K, et al. Preparation of super-strong ZrO2 ceramics using dynamic hot forging. Journal of the European Ceramic Society, 2023, 43: 733.10.1016/j.jeurceramsoc.2022.10.004 ↗
5. FAN L, SONG X, ZHAO P, et al. Super strong B4C ceramics prepared by dynamic sinter forging. Journal of the European Ceramic Society, 2023, 43: 4209.10.1016/j.jeurceramsoc.2023.02.069 ↗
6. FAN J, LIU D, ZHAO K, et al. Densification kinetics and mechanism of zirconia ceramics via hot oscillating pressing. Open Ceramics, 2023, 13: 100323.10.1016/j.oceram.2022.100323 ↗
7. HE H, ZHAO R, TIAN H, et al. Sintering behavior of alumina whisker reinforced zirconia ceramics in hot oscillatory pressing. Journal of Advanced Ceramics, 2022, 11: 893.10.1007/s40145-022-0583-5 ↗
8. LIU D, ZHANG X, FAN J, et al. Sintering behavior and mechanical properties of alumina ceramics exposed to oscillatory pressure at different sintering stages. Ceramics International, 2021, 47: 23682.10.1016/j.ceramint.2021.05.051 ↗
9. HE H, SHAO G, ZHAO R, et al. Oscillatory pressure-assisted sinter forging for preparation of high-performance SiC whisker reinforced Al2O3 composites. Journal of Advanced Ceramics, 2023, 12: 321.10.26599/JAC.2023.9220685 ↗
10. ZHU T, XIE Z. Ultrastrong tough zirconia ceramics by defects- engineering. Journal of the American Ceramic Society, 2022, 105: 1617.10.1111/jace.18178 ↗
11. TERRANI K A, KIGGANS J O, KATOH Y, et al. Fabrication and characterization of fully ceramic microencapsulated fuels. Journal of Nuclear Materials, 2012, 426: 268.10.1016/j.jnucmat.2012.03.049 ↗
12. SNEAD L L, TERRANI K A, KATOH Y, et al. Stability of SiC-matrix microencapsulated fuel constituents at relevant LWR conditions. Journal of Nuclear Materials, 2014, 448: 389.10.1016/j.jnucmat.2013.09.056 ↗
13. CAO F, FAN X, LIU B, et al. Microstructure and thermal conductivity of fully ceramic microencapsulated fuel fabricated by spark plasma sintering. Journal of the American Ceramic Society, 2018, 101: 4224.10.1111/jace.15585 ↗
14. COLOGNA M, TYRPEKL V, ERNSTBERGER M, et al. Sub-micrometre grained UO2 pellets consolidated from sol gel beads using spark plasma sintering (SPS). Ceramics International, 2016, 42: 6619.10.1016/j.ceramint.2015.12.172 ↗
15. LI J, FAN J, YUAN Y, et al. Effect of oscillatory pressure on the sintering behavior of ZrO2 ceramic. Ceramics International, 2020, 46: 13240.10.1016/j.ceramint.2020.02.100 ↗
16. YUAN Y, FAN J, LI J, et al. Oscillatory pressure sintering of Al2O3 ceramics. Ceramics International, 2020, 46: 15670.10.1016/j.ceramint.2020.03.117 ↗
17. FENG B, ZHOU Y, PENG C, et al. Vibration assisted hot-press sintering of AlN ceramics. Journal of the American Ceramic Society, 2015, 98: 1711.10.1111/jace.13591 ↗
18. GUBERNAT A, STOBIERSKI L, LABAJ P. Microstructure and mechanical properties of silicon carbide pressureless sintered with oxide additives. Journal of the European Ceramic Society, 2007, 27: 781.10.1016/j.jeurceramsoc.2006.04.009 ↗
19. FAN J, YUAN Y, LI J, et al. Densification and grain growth in oscillatory pressure sintering of alumina toughened zirconia ceramic composites. Journal of Alloys and Compounds, 2020, 845: 155644.10.1016/j.jallcom.2020.155644 ↗
20. GAO Y, GAO K, FAN L, et al. Oscillatory pressure sintering of WC-Fe-Ni cemented carbides. Ceramics International, 2020, 46: 12727.10.1016/j.ceramint.2020.02.040 ↗
21. GAO K, XU Y, TANG G, et al. Oscillating pressure sintering of W-Ni-Fe refractory alloy. Journal of Alloys and Compounds, 2019, 805: 789.10.1016/j.jallcom.2019.07.141 ↗
22. XIE Z, LI S, AN L. A novel oscillatory pressure-assisted hot pressing for preparation of high performance ceramics. Journal of the American Ceramic Society, 2014, 97: 1012.10.1111/jace.12869 ↗
23. LI S, XIE Z, XUE W. Microstructure and mechanical properties of zirconia ceramics consolidated by a novel oscillatory pressure sintering. Ceramics International, 2015, 41: 10281.10.1016/j.ceramint.2015.04.026 ↗
24. GAO K, ZHAO J, SUN D, et al. W-Ni-Fe refractory alloy sintered by hot oscillating pressure under different amplitudes. Advanced Engineering Materials, 2023, 25: 2201899.10.1002/adem.202201899 ↗
25. PARK H S, RUDD R E, CAVALLO R M, et al. Grain-size- independent plastic flow at ultrahigh pressures and strain rates. Physical Review Letters, 2015, 114: 065502.10.1103/PhysRevLett.114.065502 ↗
26. LIU D, DU X, ZHAO K, et al. Sintering behavior and mechanical properties of β-SiC ceramics under oscillatory pressure. Ceramics International, 2024, 50: 1231.10.1016/j.ceramint.2023.10.216 ↗
27. LI W, LIU D, WANG K, et al. High entropy oxide ceramics (MgCoNiCuZn)O: flash sintering synthesis and properties. Journal of Inorganic Materials, 2022, 37: 1289.10.15541/jim20220320 ↗
28. RAHAMAN M N. Ceramics processing and sintering, 2nd edition. New York: Marcel Dekker Inc., 2003.
29. LIU D, WANG K, ZHAO K, et al. Creep behavior of zirconia ceramics under a strong DC field. Scripta Materialia, 2022, 214: 114654.10.1016/j.scriptamat.2022.114654 ↗
30. BIND J M, BIGGERS J V. Hot-pressing of silicon carbide with 1% boron carbide addition. Journal of the American Ceramic Society, 2010, 58: 304.10.1111/j.1151-2916.1975.tb11482.x ↗
31. RAY D A, KAUR S, CUTLER R A, et al. Effect of additives on the activation energy for sintering of silicon carbide. Journal of the American Ceramic Society, 2010, 91: 1135.10.1111/j.1551-2916.2008.02271.x ↗
32. YANG X, JIANG D L, TAN S H, et al. Densification kinetics and mechanism of β-SiC pressureless sintering. Journal of Inorganic Materials, 1992, 7(1): 25.
33. HASE T, SUZUKI H. Initial-stage sintering of β-SiC with concurrent boron and carbon additions. Journal of the Ceramic Association of Japan, 1980, 88: 258.10.2109/jcersj1950.88.1017_258 ↗
34. JANA D C, SUNDARARAJAN G, CHATTOPADHYAY K. Effective activation energy for the solid-state sintering of silicon carbide ceramics. Metallurgical and Materials Transactions A, 2018, 49: 559910.1007/s11661-018-4884-9 ↗
35. MALINGE A, COUPÉ A, PETITCORPS Y L, et al. Pressureless sintering of beta silicon carbide nanoparticles. Journal of the European Ceramic Society, 2012, 32: 4393.10.1016/j.jeurceramsoc.2012.06.008 ↗