Research Progress on Ultrahigh Temperature Oxide Eutectic Ceramics by Laser Additive Manufacturing
Source abstract
Abstract
Melt-grown oxide eutectic ceramics possess a large area of clean and firmly bonded phase interfaces through liquid-solid phase transformation, which makes them present excellent high-temperature properties such as strength retention, creep resistance, thermal stability, oxidation and corrosion resistance. As a result, directionally
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. JAMES C W, EDGAR A S. Progress in structural materials for aerospace systems. Acta Materialia, 2003, 51(19): 5775-5799.10.1016/j.actamat.2003.08.023 ↗
2. WAKU Y, SAKUMA T. Dislocation mechanism of deformation and strength of Al2O3-YAG single crystal composites at high temperatures above 1500 ℃. Journal of the European Ceramic Society, 2000, 20(10): 1453-1458.10.1016/S0955-2219(00)00028-5 ↗
3. PASTOR J Y, MARTIN A, MOLINA-ALDAREGUIA J M, et al. Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics. Journal of the European Ceramic Society, 2013, 33(13/14): 2579-2586.10.1016/j.jeurceramsoc.2013.03.033 ↗
4. OCHIAI S, UEDA T, SATO K, et al. Deformation and fracture behavior of an Al2O3/YAG composite from room temperature to 2023 K. Composites Science and Technology, 2001, 61(14): 2117-2128.10.1016/S0266-3538(01)00159-2 ↗
5. WAKU Y, NAKAGAWA N, WAKAMOTO T, et al. A ductile ceramic eutectic composite with high strength at 1873 K. Nature, 1997, 389(6646): 49-52.10.1038/37937 ↗
6. LLORCA J, ORERA V M. Directionally solidified eutectic ceramic oxides. Progress in Materials Science, 2006, 51(6): 711-809.10.1016/j.pmatsci.2005.10.002 ↗
7. WANG X, ZHANG W, ZHONG Y J, et al. Introduction of low strain energy GdAlO3 grain boundaries into directionally solidified Al2O3/GdAlO3 eutectics. Acta Materialia, 2021, 221: 117355.10.1016/j.actamat.2021.117355 ↗
8. MA W D, ZHANG J, SU H J, et al. Phase growth patterns for Al2O3/GdAlO3 eutectics over wide ranges of compositions and solidification rates. Journal of Materials Science & Technology, 2021, 65: 89-98.10.1016/j.jmst.2020.03.087 ↗
9. SU H J, LIU Y, REN Q, et al. Distribution control and formation mechanism of gas inclusions in directionally solidified Al2O3-Er3Al5O12-ZrO2 ternary eutectic ceramic by laser floating zone melting. Journal of Materials Science & Technology, 2021, 66: 21-27.10.1016/j.jmst.2020.03.085 ↗
10. SUN L C, ZHOU C, DU T F, et al. Directionally solidified Al2O3/Er3Al5O12 and Al2O3/Yb3Al5O12 eutectic ceramics prepared by optical floating zone melting. Journal of Inorganic Materials, 2021, 36(6): 652-658.10.15541/jim20200508 ↗
11. NAKAGAWA N, OHSSUBO H, MITANI A, et al. High temperature strength and thermal stability for melt growth composite. Journal of the European Ceramic Society, 2005, 25(8): 1251-1257.10.1016/j.jeurceramsoc.2005.01.030 ↗
12. NAKAGAWA N, OHSSUBO H, WAKU Y, et al. Thermal emission properties of Al2O3/Er3Al5O12 eutectic ceramics. Journal of the European Ceramic Society, 2005, 25(8): 1285-1291.10.1016/j.jeurceramsoc.2005.01.031 ↗
13. OTSUKA A, WAKU Y, TANAKA R. Corrosion of a unidirectionally solidified Al2O3/YAG eutectic composite in a combustion environment. Journal of the European Ceramic Society, 2005, 25(8): 1269-1274.10.1016/j.jeurceramsoc.2005.01.008 ↗
14. ZHANG F Y, GAO P P, TAN H, et al. Tailoring grain morphology in Ti-6Al-3Mo through heterogeneous nucleation in directed energy deposition. Journal of Materials Science & Technology, 2021, 88: 132-142.10.1016/j.jmst.2021.01.056 ↗
15. CHAKRABORTY A, TANGESTANI R, BATMAZ R, et al. In-process failure analysis of thin-wall structures made by laser powder bed fusion additive manufacturing. Journal of Materials Science & Technology, 2022, 98: 233-243.10.1016/j.jmst.2021.05.017 ↗
16. KIM Y K, KIM M C, LEE K A. 1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion. Journal of Materials Science & Technology, 2022, 97: 10-19.10.1016/j.jmst.2021.04.030 ↗
17. XING L L, ZHAO C C, CHEN H, et al. Microstructure of a Ti-50wt% Ta alloy produced via laser powder bed fusion. Acta Metallurgica Sinica, 2020, 33(7): 981-990.10.1007/s40195-020-01052-w ↗
18. EBRAHIMNIA M, XIE Y J, CHI C T. Effect of laser power and deposition environment on the microstructure and properties of direct laser metal-deposited 12CrNi2 steel. Acta Metallurgica Sinica, 2020, 33(4): 528-538.10.1007/s40195-019-00974-4 ↗
19. YU C F, ZHONG Y, ZHANG P, et al. Effect of build direction on fatigue performance of L-PBF 316L stainless steel. Acta Metallurgica Sinica, 2020, 33(4): 539-550.10.1007/s40195-019-00983-3 ↗
20. WANG X, LÜ F, SHEN L D, et al. Influence of island scanning strategy on microstructures and mechanical properties of direct laser-deposited Ti-6Al-4V structures. Acta Metallurgica Sinica, 2019, 32(9): 1173-1180.10.1007/s40195-018-0858-6 ↗
21. SHEN Z L, SU H J, LIU H F, et al. Research progress on laser additive manufacturing technology and its defect control for ultra-high temperature oxide ceramics. Acta Materiae Compositae Sinica, 2021, 38(3): 668-679.
22. GU D D, ZHANG H M, CHEN H Y, et al. Laser additive manufacturing of high-performance metallic aerospace components. Chinese Journal of Lasers, 2020, 47(5): 32-55.10.3788/CJL202047.0500002 ↗
23. SU H J, WEI K C, GUO W, et al. New development of laser rapid forming and its application in high performance materials processing. The Chinese Journal of Nonferrous Metals, 2013, 23(6): 1567-1574.
24. LAKHDAR Y, TUCK C, BINNER J, et al. Additive manufacturing of advanced ceramic materials. Progress in Materials Science, 2021, 116: 100736.10.1016/j.pmatsci.2020.100736 ↗
25. CHEN Z W, LI Z Y, LI J J, et al. 3D printing of ceramics: a review. Journal of the European Ceramic Society, 2019, 39(4): 661-687.10.1016/j.jeurceramsoc.2018.11.013 ↗
26. TAMEZ M B A, TAHA I. A review of additive manufacturing technologies and markets for thermosetting resins and their potential for carbon fiber integration. Additive Manufacturing, 2021, 37: 101748.10.1016/j.addma.2020.101748 ↗
27. SUN C, WANG Y, MCMURTREY M D, et al. Additive manufacturing for energy: a review. Applied Energy, 2021, 282: 116041.10.1016/j.apenergy.2020.116041 ↗
28. GU D D, SHI X Y, POPRAWE R, et al. Material-structure- performance integrated laser-metal additive manufacturing. Science, 2021, 372(6545): 932-947.10.1126/science.abg1487 ↗
29. SU H J, ZHANG J, LIU L, et al. Rapid growth and formation mechanism of ultrafine structural oxide eutectic ceramics by laser direct forming. Applied Physics Letters, 2011, 99(22): 221913.10.1063/1.3664108 ↗
30. WILKES J, HAGEDORN Y, MEINERS W, et al. Additive manufacturing of ZrO2-Al2O3 ceramic components by selective laser melting. Rapid Prototyping Journal, 2013, 19(1): 51-57.10.1108/13552541311292736 ↗
31. NIU F Y, WU D J, MA G Y, et al. Nanosized microstructure of Al2O3-ZrO2(Y2O3) eutectics fabricated by laser engineered net shaping. Scripta Materialia, 2015, 95: 39-41.10.1016/j.scriptamat.2014.09.026 ↗
32. NIU F Y, WU D J, MA G Y, et al. Rapid fabrication of eutectic ceramic structures by laser engineered net shaping. ISEM XVIII, 2016, 42: 91-95.10.1016/j.procir.2016.02.196 ↗
33. YAN S, WU D J, MA G Y, et al. Formation mechanism and process optimization of nano Al2O3-ZrO2 eutectic ceramic via laser engineered net shaping (LENS). Ceramics International, 2017, 43(17): 14742-14747.10.1016/j.ceramint.2017.07.214 ↗
34. MA G Y, YAN S, NIU F Y, et al. Microstructure and mechanical properties of solid Al2O3-ZrO2 (Y2O3) eutectics prepared by laser engineered net shaping. Journal of Laser Applications, 2017, 29(2): 022305.10.2351/1.4983258 ↗
35. YAN S, WU D J, NIU F Y, et al. Al2O3-ZrO2 eutectic ceramic via ultrasonic-assisted laser engineered net shaping. Ceramics International, 2017, 43(17): 15905-15910.10.1016/j.ceramint.2017.08.165 ↗
36. YAN S, WU D J, MA G Y, et al. Nano-sized Al2O3-ZrO2 eutectic ceramic structures prepared by ultrasonic-assisted laser engineered net shaping. Materials Letters, 2018, 212: 8-11.10.1016/j.matlet.2017.10.053 ↗
37. YAN S, WU D J, NIU F Y, et al. Effect of ultrasonic power on forming quality of nano-sized Al2O3-ZrO2 eutectic ceramic via laser engineered net shaping (LENS). Ceramics International, 2018, 44(1): 1120-1126.10.1016/j.ceramint.2017.10.067 ↗
38. WU D J, LU F, ZHAO D K, et al. Effect of doping SiC particles on cracks and pores of Al2O3-ZrO2 eutectic ceramics fabricated by directed laser deposition. Journal of Materials Science, 2019, 54(13): 9321-9330.10.1007/s10853-019-03555-z ↗
39. WU D J, SAN J D, NIU F Y, et al. Directed laser deposition of Al2O3-ZrO2 melt-grown composite ceramics with multiple composition ratios. Journal of Materials Science, 2020, 55(16): 6794-6809.10.1007/s10853-020-04524-7 ↗
40. WU D J, SAN J D, NIU F Y, et al. Effect and mechanism of ZrO2 doping on the cracking behavior of melt-grown Al2O3 ceramics prepared by directed laser deposition. International Journal of Applied Ceramic Technology, 2020, 17(1): 227-238.10.1111/ijac.13374 ↗
41. WU D J, LIU H C, LU F, et al. Al2O3-YAG eutectic ceramic prepared by laser additive manufacturing with water-cooled substrate. Ceramics International, 2019, 45(3): 4119-4122.10.1016/j.ceramint.2018.11.032 ↗
42. YAN S, WU D J, HUANG Y F, et al. C fiber toughening Al2O3-ZrO2 eutectic via ultrasonic-assisted directed laser deposition. Materials Letters, 2019, 235: 228-231.10.1016/j.matlet.2018.10.047 ↗
43. YAN S, HUANG Y F, ZHAO D K, et al. 3D printing of nano- scale Al2O3-ZrO2 eutectic ceramic: principle analysis and process optimization of pores. Additive Manufacturing, 2019, 28: 120-126.10.1016/j.addma.2019.04.024 ↗
44. LI F Z, ZHANG X W, SUI C Y, et al. Microstructure and mechanical properties of Al2O3-ZrO2 ceramic deposited by laser direct material deposition. Ceramics International, 2018, 44(15): 18960-18968.10.1016/j.ceramint.2018.07.135 ↗
45. LI F Z, LIU Z W, LI B, et al. Pore formation model for direct laser deposition of Al2O3-ZrO2 ceramic. Journal of the European Ceramic Society, 2022, 42(1): 207-215.10.1016/j.jeurceramsoc.2021.09.042 ↗
46. FAN Z Q, ZHAO Y T, TAN Q Y, et al. New insights into the growth mechanism of 3D-printed Al2O3-Y3Al5O12 binary eutectic composites. Scripta Materialia, 2020, 178: 274-280.10.1016/j.scriptamat.2019.11.040 ↗
47. FAN Z Q, ZHAO Y T, TAN Q Y, et al. Nanostructured Al2O3-YAG-ZrO2 ternary eutectic components prepared by laser engineered net shaping. Acta Materialia, 2019, 170: 24-37.10.1016/j.actamat.2019.03.020 ↗
48. BARTLETT J L, LI X. An overview of residual stresses in metal powder bed fusion. Additive Manufacturing, 2019, 27: 131-149.10.1016/j.addma.2019.02.020 ↗
49. FANG Z C, WU Z L, HUANG C G, et al. Review on residual stress in selective laser melting additive manufacturing of alloy parts. Optics and Laser Technology, 2020, 129: 106283.10.1016/j.optlastec.2020.106283 ↗
50. ACEVEDO R, SEDLAK P, KOLMAN R, et al. Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: state of the art review. Journal of Materials Research and Technology, 2020, 9(4): 9457-9477.10.1016/j.jmrt.2020.05.092 ↗
51. CHEN W, XU L Y, HAN Y D, et al. Control of residual stress in metal additive manufacturing by low-temperature solid-state phase transformation: an experimental and numerical study. Additive Manufacturing, 2021, 42: 102016.10.1016/j.addma.2021.102016 ↗
52. SONG X, FEIH S, ZHAI W, et al. Advances in additive manufacturing process simulation: residual stresses and distortion predictions in complex metallic components. Materials & Design, 2020, 193: 108779.10.1016/j.matdes.2020.108779 ↗
53. HA K, KIM T, BAEK G Y, et al. Numerical study of the effect of progressive solidification on residual stress in single-bead-on-plate additive manufacturing. Additive Manufacturing, 2020, 34: 101245.10.1016/j.addma.2020.101245 ↗
54. ROEHLING J D, SMITH W L, ROEHLING T T, et al. Reducing residual stress by selective large-area diode surface heating during laser powder bed fusion additive manufacturing. Additive Manufacturing, 2019, 28: 228-235.10.1016/j.addma.2019.05.009 ↗
55. HUANG H, MA N S, CHEN J, et al. Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing. Additive Manufacturing, 2020, 34: 101248.10.1016/j.addma.2020.101248 ↗
56. ŞIRIN T B, KAYNAK Y. Prediction of residual stress and distortion in laser powder bed fusion additive manufacturing process of Inconel 718 alloy. Procedia CIRP, 2021, 99: 330-335.10.1016/j.procir.2021.03.102 ↗
57. SUN J M, HENSEL J, KOHLER M, et al. Residual stress in wire and arc additively manufactured aluminum components. Journal of Manufacturing Processes, 2021, 65: 97-111.10.1016/j.jmapro.2021.02.021 ↗
58. LI R S, WANG G L, ZHAO X S, et al. Effect of path strategy on residual stress and distortion in laser and cold metal transfer hybrid additive manufacturing. Additive Manufacturing, 2021, 46: 102203.10.1016/j.addma.2021.102203 ↗
59. STRANTZA M, GANERIWALA R K, CLAUSEN B, et al. Effect of the scanning strategy on the formation of residual stresses in additively manufactured Ti-6Al-4V. Additive Manufacturing, 2021, 45: 102003.s10.1016/j.addma.2021.102003 ↗
60. NADAMMAL N, MISHUROVA T, FRITSCH T, et al. Critical role of scan strategies on the development of microstructure, texture, and residual stresses during laser powder bed fusion additive manufacturing. Additive Manufacturing, 2021, 38: 101792.10.1016/j.addma.2020.101792 ↗
61. PROMOPPATUM P, UTHAISANGSUK V. Part scale estimation of residual stress development in laser powder bed fusion additive manufacturing of Inconel 718. Finite Elements in Analysis & Design, 2021, 189: 103528.10.1016/j.finel.2021.103528 ↗
62. LIU Q, DANLOS Y, SONG B, et al. Effect of high-temperature preheating on the selective laser melting of yttria-stabilized zirconia ceramic. Journal of Materials Processing Technology, 2015, 222: 61-74.10.1016/j.jmatprotec.2015.02.036 ↗
63. NIU F Y, WU D J, YAN S, et al. Process optimization for suppressing cracks in laser engineered net shaping of Al2O3 ceramics. The Journal of The Minerals, Metals & Materials Society, 2017, 69(3): 557-562.10.1007/s11837-016-2191-8 ↗
64. ZHANG K, LIU T T, LIAO W H, et al. Influence of laser parameters on the surface morphology of slurry-based Al2O3 parts produced through selective laser melting. Rapid Prototyping Journal, 2018, 24(2): 333-341.10.1108/RPJ-12-2016-0201 ↗
65. HU Y B, NING F D, CONG W L, et al. Ultrasonic vibration- assisted laser engineering net shaping of ZrO2-Al2O3 bulk parts: effects on crack suppression, microstructure, and mechanical properties. Ceramics International, 2018, 44(3): 2752-2760.10.1016/j.ceramint.2017.11.013 ↗
66. ZHENG Y, ZHANG K, LIU T T, et al. Cracks of alumina ceramics by selective laser melting. Ceramics International, 2019, 45(1): 175-184.10.1016/j.ceramint.2018.09.149 ↗
67. LIU H F, SU H J, SHEN Z L, et al. Effect of scanning speed on the solidification process of Al2O3/GdAlO3/ZrO2 eutectic ceramics in a single track by selective laser melting. Ceramics International, 2019, 45(14): 17252-17257.10.1016/j.ceramint.2019.05.281 ↗
68. LIU H F, SU H J, SHEN Z L, et al. One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition. Journal of the European Ceramic Society, 2021, 41(6): 3547-3558.10.1016/j.jeurceramsoc.2021.01.047 ↗
69. LIU H F, SU H J, SHEN Z L, et al. Direct formation of Al2O3/GdAlO3/ZrO2 ternary eutectic ceramics by selective laser melting: microstructure evolutions. Journal of the European Ceramic Society, 2018, 38(15): 5144-5152.10.1016/j.jeurceramsoc.2018.07.040 ↗
70. LIU H F, SU H J, SHEN Z L, et al. Preparation of large-size Al2O3/GdAlO3/ZrO2 ternary eutectic ceramic rod by laser directed energy deposition and its microstructure homogenization mechanism. Journal of Materials Science & Technology, 2021, 85: 218-223.10.1016/j.jmst.2021.01.025 ↗
71. TRIANTAFYLLIDIS D, LI L, STOTT F H. Mechanisms of porosity formation along the solid/liquid interface during laser melting of ceramics. Applied Surface Science, 2003, 208: 458-462.10.1016/S0169-4332(02)01433-2 ↗
72. OLIETE P B, PENA J I. Study of the gas inclusions in Al2O3/Y3Al5O12 and Al2O3/Y3Al5O12/ZrO2 eutectic fibers grown by laser floating zone. Journal of Crystal Growth, 2007, 304(2): 514-519.10.1016/j.jcrysgro.2007.02.042 ↗
73. REN Q, SU H J, ZHANG J, et al. Eutectic growth behavior with regular arrangement in the faceted Al2O3/Er3Al5O12 irregular eutectic system at low growth rate. Scripta Materialia, 2019, 162: 49-53.10.1016/j.scriptamat.2018.10.030 ↗
74. MA W D, ZHANG J, SU H J, et al. Theoretical prediction and experimental comparison for eutectic growth of Al2O3/GdAlO3 faceted eutectics. Journal of the European Ceramic Society, 2019, 39(13): 3837-3842.10.1016/j.jeurceramsoc.2019.05.014 ↗
75. REN Q, SU H J, ZHANG J, et al. Microstructure control, competitive growth and precipitation rule in faceted Al2O3/Er3Al5O12 eutectic in situ composite ceramics prepared by laser floating zone melting. Journal of the European Ceramic Society, 2019, 39(5): 1900-1908.10.1016/j.jeurceramsoc.2019.01.015 ↗
76. SU H J, REN Q, ZHANG J, et al. Microstructures and mechanical properties of directionally solidified Al2O3/GdAlO3 eutectic ceramic by laser floating zone melting with high temperature gradient. Journal of the European Ceramic Society, 2017, 37(4): 1617-1626.10.1016/j.jeurceramsoc.2016.11.041 ↗
77. SU H J, ZHANG J, CUI C J, et al. Rapid solidification behaviour of Al2O3/Y3Al5O12(YAG) binary eutectic ceramic in situ composites. Materials Science and Engineering A, 2008, 479(1/2): 380-388.10.1016/j.msea.2007.06.080 ↗
78. FAN G R, SU H J, ZHANG J, et al. Microstructure and cytotoxicity of Al2O3-ZrO2 eutectic bioceramics with high mechanical properties prepared by laser floating zone melting. Ceramics International, 2018, 44(15): 17978-17985.10.1016/j.ceramint.2018.06.275 ↗
79. SU H J, ZHANG J, CUI C J, et al. Rapid solidification of Al2O3/Y3Al5O12/ZrO2 eutectic in situ composites by laser zone remelting. Journal of Crystal Growth, 2007, 307(2): 448-456.10.1016/j.jcrysgro.2007.06.029 ↗
80. MAZEROLLES L, PIQUET N, TRICHET M, et al. New microstructures in ceramic materials from the melt for high temperature applications. Aerospace Science and Technology, 2008, 12(7): 499-505.10.1016/j.ast.2007.12.002 ↗