The influence of kenaf contents and stacking sequence on drop-weight impact properties of hybrid laminated composites reinforced polyvinyl butyral composites

For the high cost of aramid fibres and the necessity for finding alternatives which are environmentally friendly, a portion of aramid was substituted by woven kenaf at various sequences and thicknesses, to identify the proper arrangement for producing helmet shell. Drop-weight impact tests were conducted on different configurations of 19 layers of kenaf and aramid reinforced polyvinyl butyral film, which were fabricated by the hot press method. Effects of fibre content, layering sequence and energy absorption of the laminated composites were studied at three different impact energies 50, 75, 100 J. Results suggested that the behaviour of hybrid laminates has a positive effect in terms of energy absorbed and impact resistance, due to lower failure strain of kenaf fibres. Additionally, placing woven kenaf layers alternate with aramid layers provides higher impact loads and absorbed energy than placing woven kenaf and aramid separately, especially at impact level 100 J. For example, the absorbed energy of the 17 Aramid/2 Kenaf Alt. (H1A) is 72.99 J, while for 17 Aramid/2 Kenaf (H1) is 66.04 J. The closed curves indicated the success of the samples in absorbing the dissipated energy at various impact energies values. It could be deduced that it is possible to replace the aramid fibre in various composites industries by kenaf fibre, to minimize harmful environmental effects and cost of petroleum products.