Towards the growth of Cu 2 ZnSn 1−x Ge x S 4 thin films by a single-stage process: Effect of substrate temperature and composition
Source abstract
Abstract
Cu2ZnSn1-xGexS4 (CZTGS) thin films prepared by flash evaporation of a Zn-rich Cu2ZnSn0.5Ge0.5S4 bulk compound in powder form, and a subsequent thermal annealing in S containing Ar atmosphere are studied. The effect of the substrate temperature during evaporation and the initial composition of the precursor powder on the growth mechanism and properties of the final CZTGS thin film are investigated. The microstructure of the films and elemental depth profiles depend strongly on the growth conditions used. Incorporation of Ge into the Cu2ZnSnS4 lattice is demonstrated by the shift of the relevant X-ray diffraction peaks and Raman vibrational modes towards higher diffraction angles and frequencies respectively. A Raman mode at around 348-351 cm-1 is identified as characteristic of CZTGS alloys for x = [Ge]/([Sn]+[Ge]) = 0.14-0.30. The supply of Ge enables the reduction of the Sn loss via a saccrifical Ge loss. This fact allows increasing the substrate temperature up to 350º C during the evaporation, forming a high quality kesterite material and therefore, reducing the deposition process to one single stage & 2015 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Compositional dependence of structural and electronic properties of Cu2ZnSn(S,Se)4 alloys for thin film solar cells
2. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
3. Press Release. 〈http://www.zsw-bw.de/en/support/news.html〉, September 2014.
4. Enhancing the performance of CZTSSe solar cells with Ge alloying10.1016/j.solmat.2012.05.039 ↗
5. Band-gap engineering of Cu2ZnSn1−xGexS4 single crystals and influence of the surface properties10.1016/j.actamat.2014.06.040 ↗
6. Optical constants of Cu2ZnGeS4 bulk crystals10.1063/1.3500439 ↗
7. Improved performance of Ge-alloyed CZTGeSSe thin-film solar cells through control of elemental losses10.1002/pip.2442 ↗
8. Perovskite-kesterite monolithic tandem solar cells with high open-circuit voltage10.1063/1.4899275 ↗
9. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
10. T. Kato, H. Hiroi, N. Sakai, S. Muraoka, H. Sugimoto, Characterization of front and back interfaces on Cu2ZnSnS4 thin-film solar cells, in: Proceedings of the 27th EUPVSC, Frankfurt, 2012, pp. 2236–2239.
11. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
12. Cu2ZnSnSe4 thin film solar cells produced via co-evaporation and annealing including a SnSe2 capping layer10.1002/pip.2324 ↗
13. Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique10.1143/APEX.1.041201 ↗
14. Rapid annealing of reactively sputtered precursor for Cu2ZnSnS4 solar cells10.1002/pip.2265 ↗
15. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol-gel route10.1039/C3TA13533K ↗
16. Preparation of Cu2ZnSnS4 thin films by sulfurizing electroplated precursors10.1016/j.solmat.2008.11.045 ↗
17. Growth and properties of CuAlS2xSe2(1−x) single crystals10.1023/A:1016271804632 ↗
18. Structural characterization of CuIn2Se3.5, CuIn3Se5 and CuIn5Se8 compounds10.1016/S0040-6090(99)00771-3 ↗
19. Cu2ZnSnS4 thin films grown by flash evaporation and subsequent annealing in Ar atmosphere10.1016/j.tsf.2012.10.028 ↗
20. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell applications10.1063/1.3587614 ↗
21. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
22. Studies of compositional dependent Cu2Zn(GexSn1−x)S4 thin films prepared by sulfurizing sputtered metallic precursors10.1016/j.jallcom.2014.09.097 ↗
23. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
24. A new way of phase identification of AgGaGeS4.nGeS2 crystals10.1016/j.jssc.2013.05.002 ↗
25. Sublimation study of the tin sulphides SnS2, Sn2S3 and SnS10.1016/0925-8388(91)90053-X ↗
26. Optical phonons in the wurtzstannite Cu2ZnGeS4 semiconductor: polarized Raman spectroscopy and first-principle calculations10.1103/PhysRevB.89.205205 ↗
27. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
28. Non-stoichiomety effect and disorder in Cu2ZnSnS4 thin films obtained by flash evaporation: Raman scattering investigation10.1016/j.actamat.2013.11.010 ↗
29. Vibrational properties of stannite and kesterite type compounds: Raman scattering analysis of Cu2(Fe,Zn)SnS410.1016/j.jallcom.2012.06.042 ↗
30. Raman spectra of wurtzstannite quaternary compounds10.1002/pssc.201200831 ↗
31. Far infrared studies on stannite and wurtzstannite type compounds10.1016/0584-8539(91)80283-O ↗
32. Improving the conversion efficency of Cu2ZnSnS4 solar cell by low pressure sulfurization
33. Investigation of Cu(In,Ga)Se2 thin-film formation during the multi-stage co-evaporation process10.1002/pip.1233 ↗
34. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
35. Unveilling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
36. Sodium assited sintering of chalcogenides and its application to solution processed Cu2ZnSn(S,Se)4 thin film solar cells10.1021/cm403504u ↗
37. Rational defect passivation of Cu2ZnSn(S,Se)4 photovoltaics with solution-processed Cu2ZnSnS4: Na nanocrystals10.1021/ja407202u ↗
38. Effects of sodium incorporation in co-evaporated Cu2ZnSnSe4 thin-film solar cells10.1063/1.4802972 ↗
39. High-efficiency CuInxGa1−xSe2 solar cells made from (InxGa1−x)2Se3 precursor films10.1063/1.112670 ↗
40. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
41. Electronic and optical properties of Cu2ZnSnS4 and Cu2ZnSnSe410.1063/1.3318468 ↗
42. Kesterites—a challenging material for solar cells10.1002/pip.2156 ↗
43. ZnS grain size effects on near-resonant Raman scattering: optical non-destructive grain size estimation10.1039/c3ce42578a ↗
44. Development of a selective chemical etch to improve the conversión efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
45. Impact of the Ga concentration on the microstructure of CuIn1−xGaxSe2