journal article·2024-12

Experimental enhancement study of thermophysical properties of ternary carbonate phase change material with multi-dimensional nanoparticles

Meiyang Xu, Gaosheng Wei, Chao Huang, Xiaoze Du

Publisher page

Abstract

Carbonates have great application potential as heat transfer and thermal energy storage media in the development of future phase change materials. This paper gives thermophysical properties enhancement study on ternary carbonates in liquid state by adding aluminum oxide nanoparticles, multi-walled carbon nanotubes, graphene nanosheets, and experimentally evaluate the performance strengthen ability of multi-dimensional nanoparticles. The thermal diffusivities and specific heats of the prepared samples by the water solution method are determined using the laser flash technique and the differential scanning calorimetry at liquid state, respectively. A thermogravimetric analyzer is deployed for evaluate the high-temperature thermal stability of the composite ternary carbonates. Scanning electron microscopy and Fourier transform infrared spectroscopy techniques are utilized to examine the surface morphologies and chemical structures of the samples. The results indicate that there is a cooperative reinforcement impact on the thermophysical properties of ternary carbonate by utilizing zero-dimensional Al 2O 3 nanoparticles and two-dimensional graphene nanosheets, with a maximum improvement of 56.7 % for thermal conductivity, and 10.3 % for specific heat, which is apparently larger than adding any single nanoparticle. The composites exhibit superior thermal cycling stability after low-high temperature experiment, and samples can maintain thermal stability until 700 °C in the thermogravimetric analysis.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Nanofluid Flow and Heat Transfer · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. A review of phase change materials for vehicle component thermal buffering10.1016/j.apenergy.2013.08.026 ↗
2. Nanoadditives induced enhancement of thermal energy storage properties of molten salt: insights from experiments and molecular dynamics simulations10.1016/j.est.2023.108612 ↗
3. Review on research status and developing tendency of solar photovoltaic/thermal technology, Power Gener
4. Energy storage requirements and configuration analysis based on typical characteristics of global energy internet, Power Gener
5. Medium- and high-temperature latent heat thermal energy storage: material database, system review, and corrosivity assessment10.1002/er.4216 ↗
6. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
7. Heat transfer modelling and performance analysis of trough solar thermal power collector based on Al2O3 nanofluid, Power Gener
8. A review of eutectic salts as phase change energy storage materials in the context of concentrated solar power10.1016/j.ijheatmasstransfer.2023.123904 ↗
9. Al2O3 nanoparticles integration for comprehensive enhancement of eutectic salt thermal performance: experimental design, molecular dynamics calculations, and system simulation studies10.1016/j.energy.2024.130567 ↗
10. Vapor pressure and corrosivity of ternary metal-chloride molten-salt based heat transfer fluids for use in concentrating solar power systems10.1016/j.apenergy.2015.08.131 ↗
11. The enhanced specific heat capacity of ternary carbonates nanofluids with different nanoparticles10.1016/j.solmat.2017.05.032 ↗
12. Enhanced thermal properties of Li2CO3–Na2CO3–K2CO3 nanofluids with nanoalumina for heat transfer in high-temperature CSP systems10.1007/s10973-016-6050-1 ↗
13. Copper-dispersed solar salt: an improved phase change material for thermal energy storage
14. Preparation and thermophysical properties of high thermal conductive solar salt/MWCNTs composite materials10.1002/slct.201900249 ↗
15. Corrosion effect of phase change materials in solar thermal energy storage application10.1016/j.rser.2017.03.018 ↗
16. Molten salts: potential candidates for thermal energy storage applications10.1002/er.8441 ↗
17. Nanoparticles as molten salts thermophysical properties enhancer for concentrated solar power: a critical review10.1016/j.est.2021.103280 ↗
18. Al2O3 nanoparticles for enhanced thermal performance in NaCl–KCl–Na2CO3 system: from thermodynamic prediction to system level assessment10.1016/j.cej.2024.150789 ↗
19. Preparation and enhanced thermal conductivity of molten salt nanofluids with nearly unaltered viscosity10.1016/j.renene.2019.04.153 ↗
20. Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer10.1016/j.apenergy.2015.11.045 ↗
21. Experimental investigation on stability of thermal performances of solar salt based nanocomposite10.1016/j.renene.2019.07.009 ↗
22. Thermophysical properties enhancement of ternary carbonates with carbon materials for high-temperature thermal energy storage10.1016/j.solener.2017.07.010 ↗
23. Thermal-physical properties of nanoparticle-seeded nitrate molten salts10.1016/j.renene.2017.12.026 ↗
24. Preparation and characterization of molten salt based nanothermic fluids with enhanced thermal properties for solar thermal applications10.1016/j.applthermaleng.2016.04.102 ↗
25. Study on the theoretical calculation method for the effective thermal conductivity of carbon nanotube composite molten salt for solar energy application10.1016/j.solmat.2022.111631 ↗
26. Optimal concentration of alumina nanoparticles in molten Hitec salt to maximize its specific heat capacity10.1016/j.ijheatmasstransfer.2013.10.078 ↗
27. Enhanced thermal conductivity of epoxy composites filled with Al2O3/boron nitride hybrids for underfill encapsulation materials10.3390/polym13010147 ↗
28. Polymer composites with enhanced thermal conductivity via oriented boron nitride and alumina hybrid fillers assisted by 3-D printing10.1016/j.ceramint.2020.05.096 ↗
29. Enhancing thermal conductivity of epoxy with a binary filler system of h-BN platelets and Al2O3 nanoparticles10.1016/j.ijadhadh.2019.102540 ↗
30. The synergistic effects of the micro-BN and nano-Al2O3 in micro-nano composites on enhancing the thermal conductivity for insulating epoxy resin10.1016/j.compscitech.2018.10.002 ↗
31. Calculations of factors that affect thermal conductivity in epoxy composites with hybrid carbon nanotube and graphene nano platelet10.1088/2053-1591/ab71ca ↗
32. Preparation and characteristics evaluation of mono and hybrid nano-enhanced phase change materials (NePCMs) for thermal management of microelectronics10.1016/j.enconman.2019.112444 ↗
33. Experimental study on optimized composition of mixed carbonate salt for sensible heat storage in solar thermal power plant10.1016/j.solener.2011.05.004 ↗
34. Viscosity analysis of alkali metal carbonate molten salts at high temperature10.2109/jcersj2.123.355 ↗
35. Determination and evaluation of the thermophysical properties of an alkali carbonate eutectic molten salt10.1039/C5FD00236B ↗
36. Density measurement of different nanofluids and their comparison with theory10.1080/10916460701857714 ↗
37. Growth and characterization of KDP crystals with potassium carbonate as additive10.1016/j.jcrysgro.2008.09.019 ↗
38. High-temperature heat content and related properties for Li2CO3, Na2CO3, K2CO3, and the ternary eutectic mixture10.1039/tf9635900841 ↗
39. Nanofluids based on molten carbonate salts for high-temperature thermal energy storage: thermophysical properties, stability, compatibility and life cycle analysis10.1016/j.solmat.2020.110838 ↗
40. Experimental study on heat storage and corrosion properties of ternary carbonate salt-based ZnO nanofluids for solar thermal energy storage10.1007/s10973-022-11654-4 ↗
41. Enhancement of molar heat capacity of nanostructured Al2O310.1023/A:1012514216429 ↗
42. Thermal conductivity and specific heat capacity of water–ethylene glycol mixture-based nanofluids with graphene nanoplatelets10.1007/s10973-017-6276-6 ↗
43. Interfacial molecular layering enhances specific heat of nanofluids: evidence from molecular dynamics10.1016/j.molliq.2020.115217 ↗
44. Distinct behaviors of KNO3 and NaNO3 in specific heat enhancement of molten salt nanofluid10.1016/j.est.2022.106209 ↗
45. Effects of SiO2 nanoparticle dispersion on the heat storage property of the solar salt for solar power applications10.3390/en14030703 ↗
46. Increment of specific heat capacity of solar salt with SiO2 nanoparticles10.1186/1556-276X-9-582 ↗
47. Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage10.1186/1556-276X-8-448 ↗
48. Accurate measurements of thermal conductivity and thermal diffusivity of molten carbonates10.1068/htjr069 ↗
49. Enhanced specific heat and thermal conductivity of ternary carbonate nanofluids with carbon nanotubes for solar power applications10.1002/er.4923 ↗
50. Role of microconvection induced by Brownian motion of nanoparticles in the enhanced thermal conductivity of stable nanofluids10.1063/1.3147855 ↗
51. Effect of aggregation kinetics on the thermal conductivity of nanoscale colloidal solutions (Nanofluid)10.1021/nl060992s ↗
52. Nanofluids and their properties10.1115/1.4005492 ↗
53. Heat transfer between two nanoparticles through near field interaction10.1103/PhysRevLett.94.085901 ↗