Green picosecond pulsed laser-induced front poly-Si finger patterning for rear-junction double-sided Poly-Si passivated contact solar cells
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Approaching 23% efficient n-type crystalline silicon solar cells with a silicon oxide-based highly transparent passivating contact10.1016/j.nanoen.2022.107319 ↗
2. Data-driven tunnel oxide passivated contact solar cell performance analysis using machine learning
3. Combined fabrication and performance evaluation of TOPCon back‐contact solar cells with lateral power metal‐oxide‐semiconductor field‐effect transistors on a single substrate10.1002/solr.202470091 ↗
4. Mitigating parasitic absorption in Poly-Si contacts for TOPCon solar cells: a comprehensive review10.1016/j.solmat.2024.112704 ↗
5. A silicon carbide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 24%10.1038/s41560-021-00806-9 ↗
6. Dopant diffusion through ultrathin AlOx and AlOx/SiOx tunnel layer in TOPCon structure and its impact on the passivation quality on c-Si solar cells10.1016/j.solmat.2021.110970 ↗
7. Ultrafast laser-annealing of hydrogenated amorphous silicon in tunnel oxide passivated contacts for high-efficiency n-type silicon solar cells
8. Low-temperature fabrication of boron-doped amorphous silicon passivating contact as a local selective emitter for high-efficiency n-type TOPCon solar cells10.1016/j.nanoen.2024.109556 ↗
9. Enhancing poly-Si contact through a highly conductive and ultra-thin TiN layer for high-efficiency passivating contact silicon solar cells
10. Plasma treatment for chemical SiOx enables excellent passivation of p-type polysilicon passivating contact featuring the lowest J of ∼6 fA/cm2
11. Tunnel oxide deposition techniques and their parametric influence on nano-scaled SiOx layer of TOPCon solar cell: a review10.3390/en15155753 ↗
12. 24.4% industrial tunnel oxide passivated contact solar cells with ozone-gas oxidation nano SiOx and tube PECVD prepared in-situ doped polysilicon10.1016/j.solmat.2022.111803 ↗
13. Boron‐doped polysilicon passivating contacts achieving a single‐sided J0 of 4.0 fA/cm2 through a two‐step oxidation process
14. Intrinsic Poly-Si layer thickness: its role in pinhole contact formation and interface passivation in poly-silicon on oxide solar cells10.1016/j.solmat.2024.113276 ↗
15. Effect of annealing conditions on phosphorus inward diffusion from N+ Poly-Si layer in N-type TOPCon solar cells10.1016/j.mssp.2024.108282 ↗
16. Three-step process for efficient solar cells with boron-doped passivated contacts10.3390/en17061319 ↗
17. Double-side poly-Si/SiOx passivating contacts solar cells: insights into the influence of crystalline silicon wafers properties
18. Front SiON/TCO stacks development for double-side Poly-Si/SiOX passivated contacts solar cells10.1109/JPHOTOV.2022.3221556 ↗
19. Blistering-free polycrystalline silicon carbide films for double-sided passivating contact solar cells
20. Enhancing acid production of Acetobacter pasteurianus by laser and intense pulsed light mutagenesis and its molecular mechanism based on transcriptomic analysis10.1016/j.lwt.2023.114803 ↗
21. Investigation of an experimental laser sensor-guided spray control system for greenhouse variable-rate applications10.13031/trans.13366 ↗
22. Investigation and quantitative understanding of front field passivation in rear junction selective double-side TOPCon solar cells
23. Novel process for screen-printed selective area front polysilicon contacts for TOPCon cells using laser oxidation10.1109/JPHOTOV.2022.3196822 ↗
24. Effects of LPCVD-deposited thin intrinsic silicon films on the performance of boron-doped polycrystalline silicon passivating contacts10.1016/j.solener.2023.112078 ↗
25. Optimizing strategy of bifacial TOPCon solar cells with front-side local passivation contact realized by numerical simulation
26. Paste-based silver reduction for iTOPCon rear side metallization
27. High-efficiency TOPCon solar cells with laser-assisted localized boron doping via silicon paste10.1109/JPHOTOV.2024.3380461 ↗
28. Studying dopant diffusion from Poly-Si passivating contacts10.1016/j.solmat.2019.109978 ↗
29. Predictive simulation of doping processes for silicon solar cells10.1016/j.egypro.2013.07.283 ↗
30. Intrinsic silicon buffer layer improves hole‐collecting poly‐si passivating contact10.1002/admi.202000188 ↗
31. 22.56% total area efficiency of n-TOPCon solar cell with screen-printed Al paste10.1016/j.solener.2024.112862 ↗
32. On the recombination behavior of p+-type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces
33. Comparison of firing stability between p‐ and n‐type polysilicon passivating contacts10.1002/pip.3544 ↗
34. Passivation quality control in poly-Si/SiO/c-Si passivated contact solar cells with 734 mV implied open circuit voltage10.1016/j.solmat.2018.09.013 ↗