journal article·2026-02

Structure and Tribotechnical Properties of Polymer Composite Materials Based on Polytetrafluoroethylene and Palygorskite

Iu. V. Kapitonova, P. N. Tarasova, N. N. Lazareva, A. A. Okhlopkova, I. A. Kurzina, A. P. Vasilev, D. N. Sidorova, A. M. Spiridonov

Journal of Friction and Wear· Volume 47· Issue 1
Publisher page

Abstract

Polytetrafluoroethylene (PTFE) has a low friction coefficient and high chemical inertness, which makes it popular for the manufacture of tribological materials. However, its main disadvantage is low wear resistance. To improve the characteristics of PTFE, fillers are used, among which natural silicates, including palygorskite, are promising due to their availability, mechanical strength, and ability to improve tribological properties. Thus, the aim of the work is to develop polymer composite materials based on PTFE and natural palygorskite silicate with improved tribological characteristics. The starting materials were PTFE powder grade PN-90 and natural palygorskite of Ural origin. Structural analysis of the samples was performed using IR spectroscopy and scanning electron microscopy with energy-dispersive analysis, hardness was measured using the Shore A method. The results showed a significant improvement in the tribological characteristics of composites with palygorskite compared to the original PTFE. With the addition of 5 wt % mechanically activated palygorskite, the wear rate decreased from 120 to 0.36 mg/h, and wear resistance increased 330 times. The friction coefficient increases slightly, but remains at a fairly low level, which is due to changes in the microstructure of the friction surface. The results of the conducted studies of the friction surface of composite samples confirm the formation of a strong wear-resistant surface layer (secondary structure). The resulting composites are promising for use in friction units in engineering and industrial equipment, where high wear resistance is required at a low friction coefficient.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Material Properties and Applications · Polymer Science and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Deshwal, D., Belgamwar, S.U., Bekinal, S.I., and Doddaman, M., Role of reinforcement on the tribological properties of polytetrafluoroethylene composites: A comprehensive review, Polym. Compos., 2024, vol. 45, no. 16, pp. 14 475–14 497. https://doi.org/10.1002/pc.2880210.1002/pc.28802 ↗
2. Ebnesajjad, S., Introduction to Fluoropolymers: Materials, Technology, and Applications, Plastics Design Library, Amsterdam: Elsevier, 2020. https://doi.org/10.1016/C2018-0-04702-710.1016/C2018-0-04702-7 ↗
3. Dhanumalayan, E. and Joshi, G.M., Performance properties and applications of polytetrafluoroethylene (PTFE)—A review, Adv. Compos. Hybrid Mater., 2018, vol. 1, no. 2, pp. 247–268. https://doi.org/10.1007/s42114-018-0023-810.1007/s42114-018-0023-8 ↗
4. Xia, Ya., Yang, K., Feng, X., and Wang, Yu., Tribological properties of modified kaolin doped polymer as polytetrafluoroethylene grease additive, Tribol. Int., 2022, vol. 173, no. 173, p. 107612. https://doi.org/10.1016/j.triboint.2022.10761210.1016/j.triboint.2022.107612 ↗
5. Jia, Z., Yan, Y., Chen, X., and Han, G., Tribological behaviors of PTFE composites filled with surface-modified nano-serpentine under natural seawater lubrication, International Journal of Simulation: Systems, Science and Technology, 2016, vol. 17, pp. 36–37. https://doi.org/10.5013/IJSSST.a.17.31.3610.5013/IJSSST.a.17.31.36 ↗
6. Lazareva, N.N., Okhlopkova, A.A., Kapitonova, Yu.V., Tarasova, P.N., Vasil’ev, A.P., Danilova, S.N., and Volnyanko, E.N., Technological features of developing polymer-silicate tribological composites based on polytetrafluoroethylene (review), Polimernye Materialy i Tekhnologii, 2025, vol. 11, no. 2, pp. 6–21. https://doi.org/10.32864/polymmattech-2025-11-2-6-2110.32864/polymmattech-2025-11-2-6-21 ↗
7. Kapitonova, I., Lazareva, N., Tarasova, P., Okhlopkova, A., Laukkanen, S., and Mukhin, V., Morphology analysis of friction surfaces of composites based on PTFE and layered silicates, Polymers, 2022, vol. 14, no. 21, p. 4658. https://doi.org/10.3390/polym1421465810.3390/polym14214658 ↗
8. Vasilev, A.P., Struchkova, T.S., Nikiforov, L.A., Okhlopkova, A.A., Grakovich, P.N., Shim, E.L., and Cho, J.-H., Mechanical and tribological properties of polytetrafluoroethylene composites with carbon fiber and layered silicate fillers, Molecules, 2019, vol. 24, no. 2, p. 224. https://doi.org/10.3390/molecules2402022410.3390/molecules24020224 ↗
9. Wang, Ch., Wang, Zh., Li, Ch., Zhen, W., Wang, Sh., and Huang, Sh., Effects of modified palygorskite on performance, crystallization and rheology of polyphenylene sulfide, Appl. Clay Sci., 2023, vol. 240, p. 106967. https://doi.org/10.1016/j.clay.2023.10696710.1016/j.clay.2023.106967 ↗
10. Rosado, D.E.C., Alpuche, E.F.P., and Uribe-Calderón, J., The effect of surface modification of palygorskite on the morphology, mechanical, and thermal properties of Nylon 6/palygorskite nanocomposites prepared by melt compounding, Polym. Compos., 2017, vol. 39, no. s3, pp. e1531–e1543. https://doi.org/10.1002/pc.2442710.1002/pc.24427 ↗
11. Rusmin, R., Sarkar, B., Mukhopadhyay, R., Tsuzuki, T., Liu, Ya., and Naidu, R., Facile one pot preparation of magnetic chitosan-palygorskite nanocomposite for efficient removal of lead from water, J. Colloid Interface Sci., 2022, vol. 608, part 1, pp. 575–587. https://doi.org/10.1016/j.jcis.2021.09.10910.1016/j.jcis.2021.09.109 ↗
12. Berladir, K., Gusak, O., Demianenko, M., Zajac, J., and Ruban, A., Functional properties of PTFE-composites produced by mechanical activation, Advances in Design, Simulation and Manufacturing II. DSMIE 2019, Ivanov, V. et al., Eds., Lecture Notes in Mechanical Engineering, Cham: Springer, 2019, pp. 391–401. https://doi.org/10.1007/978-3-030-22365-6_3910.1007/978-3-030-22365-6_39 ↗
13. Rao, G.R., Srikanth, I., and Reddy, K.L., Effect of organo-modified montmorillonite nanoclay on mechanical, thermal and ablation behavior of carbon fiber/phenolic resin composites, Def. Technol., 2021, vol. 17, no. 3, pp. 812–820. https://doi.org/10.1016/j.dt.2020.05.01210.1016/j.dt.2020.05.012 ↗
14. Kapitonova, I.V., Tarasova, P.N., Okhlopkova, A.A., and Lazareva, N.N., Influence of a hybrid complex of fillers including olivinite and magnesium spinel on the structure and properties of polytetrafluoroethylene, J. Polym. Res., 2023, vol. 30, no. 8, p. 328. https://doi.org/10.1007/s10965-023-03710-w10.1007/s10965-023-03710-w ↗
15. Meirelles, L.M.A., Barbosa, R.D.M., Sanchez-Espejo, R., García-Villén, F., Perioli, L., Viseras, C., Moura, T.F.A.D.L.E., and Raffin, F.N., Investigation into Brazilian palygorskite for its potential use as pharmaceutical excipient: Perspectives and applications, Materials, 2023, vol. 16, no. 14, p. 4962. https://doi.org/10.3390/ma1614496210.3390/ma16144962 ↗
16. Lomova, O.S., Palygorskity i sepiolity, kak indikatory geologicheskikh obstanovok (Palygorskites and Sepiolites as Indicators of Geological Environments), Moscow: Nauka, 1979.
17. Okhlopkova, A.A., Vinogradov, A.V., and Pinchuk, L.S., Plastiki, napolnennye ul’tradispersnymi neorganicheskimi soedineniyami (Plastics Filled with Ultradispersed Inorganic Compounds), Gomel: Institut Mekhaniki Metallopolimernykh Sistem im. V.A. Belogo Natsional’noi Akademii Nauk Belarusi, 1999.
18. Aly, A.A., Zeidan, E.-S.B., Alshennawy, A.A., El-Masry, A.A., and Wasel, W.A., Friction and wear of polymer composites filled by nano-particles: A review, World J. Nano Sci. Eng., 2012, vol. 2, no. 1, pp. 32–39. https://doi.org/10.4236/wjnse.2012.2100610.4236/wjnse.2012.21006 ↗
19. Fu, S.-Y., Feng, X.-Q., Lauke, B., and Mai, Y.-W., Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites, Composites, Part B, 2008, vol. 39, no. 6, pp. 933–961. https://doi.org/10.1016/j.compositesb.2008.01.00210.1016/j.compositesb.2008.01.002 ↗
20. Okhlopkova, A.A., Lazareva, N.N., Kapitonova, Yu.V., Tarasova, P.N., Vasil’ev, A.P., Danilova, S.N., and Borisova, R.V., Polymer-silicate composites based on polytetrafluoroethylene, Polimernye Materialy i Tekhnologii, 2024, vol. 10, no. 4, pp. 6–19. https://doi.org/10.32864/polymmattech-2024-10-4-6-1910.32864/polymmattech-2024-10-4-6-19 ↗
21. Bouznik, V.M., Ignatieva, L.N., Kaidalova, T.A., Kim, I.P., Kiryukhin, D.P., Kuryavyi, V.G., Savchenko, N.N., and Slobodyuk, A.B., Structure of fluoropolymer products prepared from solutions of tetrafluoroethylene telomers, Polym. Sci., Ser. A, 2008, vol. 50, no. 9, pp. 965–970. https://doi.org/10.1134/s0965545x0809005810.1134/s0965545x08090058 ↗
22. Belyi, V.A., Egorenkov, N.I., and Pleskachevskii, Yu.M., Termo- i tribookislitel’nye protsessy (Thermo- and Tribooxidizing Processes), Moscow: Khimiya, 1987.