Application of Ionic Copper Alloying of Structural Steel Surface to Increase the Performance of Heavy-Loaded Dry Sliding Friction Pairs
Source abstract
Abstract
Abstract The article presents the results of a study examining the effectiveness of copper ion implantation in the steel surface for a similar friction pair without lubricant. It is shown that under steady-state friction conditions with implanted ions at irradiation doses of 1017 and 5 × 1017 ion/cm2, the steel wear resistance increases by 2 and 1.5 times, respectively. The effect of preliminary implantation of iron ions at a dose of 1016 ion/cm2 is examined. It is found that the use of preliminary implantation leads to a 2.5-fold increase in wear resistance. The friction surface of samples pre-implanted with iron ions exhibits minimal damage and the highest wear resistance. The article describes structural changes in the surface plastic deformation zone during sliding friction of steel with a copper-based coating. It is shown that the increase in wear resistance is associated with the presence of a “long-range effect,” which contributes to an increase in the wear resistance of surface layers. The mechanism of the long-range effect in ion-alloyed metallic materials under contact deformation conditions is discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Electrical Contact Performance and Analysis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Kragel’skii, I.V., Dobychin, M.N., and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Fundamentals of Friction and Wear Analysis), Moscow: Mashinostroenie, 1977.
2. Dyachkova, L.N., Structure and properties of antifriction pseudo-alloys of the powder steel–copper alloy, infiltrated with materials of various compositions, J. Frict. Wear, 2023, vol. 44, no. 4, pp. 197–203. https://doi.org/10.3103/s106836662304005010.3103/s1068366623040050 ↗
3. Devoino, O.G., Feldshtein, E.E., Grigoriev, A.Y., Basinyuk, V.L., Kardapolava, M.A., and Kosiakova, I.M., Tribotechnical characteristics of coatings based on bronze BRA7N6F after melting by a fiber laser, J. Frict. Wear, 2023, vol. 44, no. 1, pp. 5–9. https://doi.org/10.3103/s106836662301003810.3103/s1068366623010038 ↗
4. Kuksenova, L.I., Kozlov, D.A., and Alekseeva, M.S., Study of operational properties of steel friction pairs with antifriction coating from copper alloys produced by electric spark alloying, Fiz. Khim. Obrab. Mater., 2021, no. 4, pp. 31–41. https://doi.org/10.30791/0015-3214-2021-4-31-4110.30791/0015-3214-2021-4-31-41 ↗
5. Sachek, B.Ya., Mezrin, A.M., Arkhipov, V.E., and Londarskij, A.F., Modification of the tribocouplings by spraying metal coatings to improve their fretting resistance, J. Frict. Wear, 2018, vol. 39, no. 4, pp. 299–303. https://doi.org/10.3103/s106836661804014110.3103/s1068366618040141 ↗
6. Sachek, B.Ya., Mezrin, A.M., Arkhipov, V.E., Moskvitin, G.V., and Pugachev, M.S., Evaluation of tribotechnical properties of brass type coating applied by gas-dynamic spraying, Uprochnyayushchie Tekhnol. Pokrytiya, 2023, vol. 19, no. 1, pp. 8–12. https://doi.org/10.36652/1813-1336-2023-19-1-8-1210.36652/1813-1336-2023-19-1-8-12 ↗
7. Yagodkin, Y.D., Ion-beam treatment of metals and alloys, Itogi nauki i tekhniki. Metallovedenie i termicheskaya obrabotka (Results of Science and Technology: Metallurgy and Heat Treatment), Moscow: VINITI, 1990, vol. 24, pp. 167–221.
8. Guseva, M.I., Ion implantation in metals, Poverkhnost’. Fizika, Khimiya, Mekhanika, 1982, no. 4, pp. 27–50.
9. Byeli, A.V., Kukareko, V.A., Rubtsov, V.E., and Kolubaev, A.V., High-current density ion implantation and its influence on shear deformation and wear resistance of materials, Phys. Mesomech., 2002, vol. 5, no. 1, pp. 47–52.
10. Levantsevich, M.A., Belotserkovskii, M.A., Kukareko, V.A., and Belyi, A.V., Ion-beam nitriding thermal coatings with clad layers, Uprochnyayushchie Tekhnol. Pokrytiya, 2014, no. 11, pp. 42–47.