journal article·2026-02

Friction Machines for Friction-and-Wear Testing of Drive Roller Chains

L. A. Pletnev, A. D. Breki

Journal of Friction and Wear· Volume 47· Issue 1
Publisher page

Abstract

Abstract— Modern methods and equipment for testing and studying chain transmissions including specialized benches for testing bicycle drivetrains are considered. Advantages, limitations, and future development trends, such as the use of next-generation sensors and the automation of testing processes are considered. Special attention is paid to the standardization of testing and the adaptation of industrial methods to the specific needs of the bicycle industry and scientific research. It has been established that in most cases, the industry uses standard calculation methods and universal test machines, which explains a limited use of such testing benches and friction machines. Despite a widespread use of bicycle transport there is very little available literature concerning the wear and efficiency of bicycle chains. Thus, this paper can serve as a useful resource for professionals engaged in designing, testing, and analyzing the properties of material composing drive roller chains under the conditions of friction and wear.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Brake Systems and Friction Analysis · Control Systems in Engineering · Engineering and Materials Science Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Khamzaev, A.A., Nishonov, Kh.Kh., and Abdullaev, Z.D., Modern chain drives and their use in agricultural machinery, Mekhanika i Tekhnologiya, 2023, no. s1, pp. 20–25.
2. Liew, Yo.W., Matthews, O., Dao, D.V., and Li, H., Power transmission mechanism and tribological performance of modern bicycle drivetrains—A review, Machines, 2025, vol. 13, no. 1, p. 66. https://doi.org/10.3390/machines1301006610.3390/machines13010066 ↗
3. Spicer, J.B., Richardson, Ch.J.K., Ehrlich, M.J., Bernstein, J.R., Fukuda, M., and Terada, M., Effects of frictional loss on bicycle chain drive efficiency, J. Mech. Des., 2001, vol. 123, no. 4, pp. 598–605. https://doi.org/10.1115/1.141284810.1115/1.1412848 ↗
4. Osikov, A.A., Methodology of experimental studying of chain gear with open joint, Agroinzheneriya, 2012, no. 1, pp. 62–63.
5. Strizhkov, I.G. and Khor’kov, E.E., Modeling of electric equipment of the stand of test of roller chains, Politematicheskii Setevoi Elektronnyi Nauchnyi, Zhurnal Kubanskogo Gosudarstvennogo Agrarnogo Universiteta, 2014, no. 96, pp. 761–774.
6. Usov, A.S., Increasing the durability of drive chains of combine harvesters, Cand. Sci. (Eng.) Dissertation, Zernograd, Rostov oblast, 2017.
7. Meffert, D., Meffert, D., Oehler, M., Oehler, M., and Sauer, B., Precise friction measurement in drive chains using a chain joint tribometer, Tribol. Online, 2021, vol. 16, pp. 151–158. https://doi.org/10.2474/trol.16.15110.2474/trol.16.151 ↗
8. Saito, R., Noda, N.-A., and Sano, Yo., Newly developed wear testing machine having sufficient reproducibility useful for investigating roller chains, ISIJ Int., 2020, vol. 60, no. 10, pp. 2255–2265. https://doi.org/10.2355/isijinternational.isijint-2020-08610.2355/isijinternational.isijint-2020-086 ↗
9. Becker, A., Meffert, D., and Sauer, B., Friction and wear investigations on single chain joints, Forsch. Ingenieurwes., 2019, vol. 83, no. 1, pp. 53–63. https://doi.org/10.1007/s10010-019-00297-x10.1007/s10010-019-00297-x ↗
10. What’s the important chain testing?. https://www.universalchain.net/blogs/roller-chain/chain-testing/.
11. What are important tests for chains?. https://blog.mcc-chains.com/en/2022/12/22/important-tests-for-chain.
12. U.s. Tsubaki, Inc., The complete guide to chain, 1997. https://www.ustsubaki.com/wp-content/uploads/the-complete-guide-1.pdf.
13. Arun, A.P., Giriraj, B., and Rahaman, A.F., Gear test rig—A review, International Journal of Mechanical, 2014, pp. 16–26.
14. Herzog, Ch. and Drummer, D., Test rig for the in situ measurement of the elastic tooth deflection of plastic gears, Polymers, 2023, vol. 15, no. 7, p. 1732. https://doi.org/10.3390/polym1507173210.3390/polym15071732 ↗
15. Åkerblom, M., Gear test rig for noise and vibration testing of cylindrical gears, Proceedings OST-99 Symposium on Machine Design, 1999, pp. 183–199.
16. Westphal, Ch., Brimmers, J., and Brecher, Ch., Influence of axis misalignments in stepped planetary gear stages on the excitation behavior—Test rig development and simulative analysis, Forsch. Ingenieurwes., 2023, vol. 87, no. 3, pp. 1103–1116. https://doi.org/10.1007/s10010-023-00709-z10.1007/s10010-023-00709-z ↗
17. Pelevin, L.E., Roiko, Yu.A., Fridman, A.Z., and Borodyanskii, E.B., Gear test bench, SU Inventor’s Certificate 4336970, 1989.
18. Zverovshchikov, E.Z., Romanovskii, B.V., and Belous, A.V., Test bench for chain gears, SU Inventor’s Certificate 4032056, 1987.
19. Varaksa, A.P., Closed-circuit test bench for testing gears, SU Inventor’s Certificate 1335636/25-28, 1971.
20. Belyaev, A.I., Mikhailov, G.I., and Siritsyn, A.I., Bench for running-in and testing of gears, SU Inventor’s Certificate 4485285, 1990.
21. Pelevin, L.E., Roiko, Yu.A., Klimko, I.A., et al., Gear test bench, SU Inventor’s Certificate 4418519, 1989.
22. Biryukov, P.M., Biryukov, M.P., Korotkevich, A.V., and Belyak, K.T., Gear test bench, SU Inventor’s Certificate 4934121, 1993.
23. Pletnev, L.A., Al’-Nadzhar, M., and Breki, A.D., Modeling of deformation of links of a bushingless roller chain by the finite element method, Intellektual’naya tribologiya v mashinostroenii: BALT TRIBO 2024: Materialy 1-i Mezhdunarodnoi nauchno-prakticheskoi konferentsii (Intelligent Tribology in Mechanical Engineering: Balt Tribo 2024: Proceedings of the 1st International Scientific and Practical Conference), St. Petersburg, 2024, St. Peterburg: Politekh-Press, 2024, pp. 258–263. https://doi.org/10.18720/SPBPU/2/id24-25510.18720/SPBPU/2/id24-255 ↗
24. Ross, J. and Meyer, J., Simulating the dynamic behaviour of chain drive systems by advanced CAE programs, SAE International, 1996, p. 960298. https://doi.org/10.4271/96029810.4271/960298 ↗
25. Gorozhankin, S.A., Savenkov, N.V., and Skripkar’, V.G., Applications of asynchronous electric machine as a braking device in determining the performance of automobile internal combustion engine at unsteady modes of operation, Avtotransportnoe Predpriyatie, 2016, no. 9, pp. 49–62.
26. Byakov, K.E., Ivanenkov, V.V., Kholodenko, V.B., and Chudakov, O.I., Overview of modern dynamometer test bench designs for wheeled vehicle testing, Transportnye Sistemy, 2021, no. 4, pp. 4–15. https://doi.org/10.46960/62045_2021_4_410.46960/62045_2021_4_4 ↗
27. Berezhnoi, S.B., Puntus, A.V., Mevsha, N.V., et al., Test bench for chain gears, RF Patent 2014134006/28, 2014.
28. Egorov, A.V. and Kozlov, K.E., Inertial method for evaluating the influence of lubricant quality on the energy efficiency of chain gears, Mashinostroenie i Komp’yuternye Tekhnologii, 2013, no. 6, pp. 1–22.
29. Dowd, T., Cavanaugh, P., and Mansson, J.-A., A novel model for bicycle drivetrain efficiency, Sports Eng., 2025, vol. 28, no. 2, p. 26. https://doi.org/10.1007/s12283-025-00505-810.1007/s12283-025-00505-8 ↗
30. CeramicSpeed, Chain efficiency testing. https://ceramicspeed.com/en-eu/pages/chain-efficiency-testing.
31. Patterson, J., CeramicSpeed acquires friction facts. https://www.bikeradar.com/news/ceramicspeed-acquires-friction-facts.
32. Full load test method, Friction Facts. https://web.archive.org/web/20180421124005/http://www.friction-facts.com/equipment/chain-full-load.
33. Full tension test method, Friction Facts. https://web.archive.org/web/20180421123810/http://www.friction-facts.com/equipment/full-tension-test-method.
34. ZeroFrictionCycling. https://zerofrictioncycling.com.au/.
35. Chain longevity testing—Full test brief, ZeroFrictionCycling. https://zerofrictioncycling.com.au/wp-content/uploads/2018/04/Chain-Longevity-Testing-Full-test-brief.pdf.
36. Dotsenko, A.I. and Buyanovskii, I.A., Osnovy tribotekhniki. Uchebnik (Fundamentals of Triboengineering: A Textbook), Moscow: Infra-M, 2016.
37. Kombalov, B.C., Metody i sredstva ispytanii na trenie i iznos konstruktsionnykh i smazochnykh materialov. Spravochnik (Methods and Means of Friction and Wear Tests of Structural and Lubricating Materials: A Handbook), Frolov, K.V. and Marchenko, E.A., Eds., Moscow: Mashinostroenie, 2008.
38. Tabascio, A., Tiznado-Aitken, I., Harris, D., and Farber, S., Assessing the potential of cycling growth in Toronto, Canada, Int. J. Sustainable Transp., 2023, vol. 17, no. 12, pp. 1370–1383. https://doi.org/10.1080/15568318.2023.219626410.1080/15568318.2023.2196264 ↗
39. Oliveira, F., Nery, D., Costa, D.G., Silva, I., and Lima, L., A survey of technologies and recent developments for sustainable smart cycling, Sustainability, 2021, vol. 13, no. 6, p. 3422. https://doi.org/10.3390/su1306342210.3390/su13063422 ↗
40. Chen, W., Carstensen, T.A., Wang, R., Derrible, S., Rojas-Rueda, D., Nieuwenhuijsen, M.J., and Liu, G., Historical patterns and sustainability implications of worldwide bicycle ownership and use, Commun. Earth Environ., 2022, vol. 3, no. 1, p. 171. https://doi.org/10.1038/s43247-022-00497-410.1038/s43247-022-00497-4 ↗
41. Rérat, P., The rise of the e-bike: Towards an extension of the practice of cycling?, Mobilities, 2021, vol. 16, no. 3, pp. 423–439. https://doi.org/10.1080/17450101.2021.189723610.1080/17450101.2021.1897236 ↗
42. Teixeira, J.F., Silva, C., and Moura e Sá, F., Empirical evidence on the impacts of bikesharing: A literature review, Transp. Rev., 2021, vol. 41, no. 3, pp. 329–351. https://doi.org/10.1080/01441647.2020.184132810.1080/01441647.2020.1841328 ↗
43. Popan, C., Bicycle Utopias: Imagining Fast and Slow Cycling Futures, Abingdon, UK: Routledge, 2018. https://doi.org/10.4324/978042942411310.4324/9780429424113 ↗
44. Malizia, F. and Blocken, B., Cyclist aerodynamics through time: Better, faster, stronger, J. Wind Eng. Ind. Aerodyn., 2021, vol. 214, p. 104673. https://doi.org/10.1016/j.jweia.2021.10467310.1016/j.jweia.2021.104673 ↗
45. Holmberg, K. and Erdemir, A., Influence of tribology on global energy consumption, costs and emissions, Friction, 2017, vol. 5, no. 3, pp. 263–284. https://doi.org/10.1007/s40544-017-0183-510.1007/s40544-017-0183-5 ↗
46. Underwood, L. and Jermy, M., Determining optimal pacing strategy for the track cycling individual pursuit event with a fixed energy mathematical model, Sports Eng., 2014, vol. 17, no. 4, pp. 183–196. https://doi.org/10.1007/s12283-014-0153-310.1007/s12283-014-0153-3 ↗
47. Pickering, C. and Byrne, J., The benefits of publishing systematic quantitative literature reviews for PhD candidates and other early-career researchers, Higher Educ. Res. Dev., 2014, vol. 33, no. 3, pp. 534–548. https://doi.org/10.1080/07294360.2013.84165110.1080/07294360.2013.841651 ↗
48. Lovejoy, K. and Handy, S., Developments in bicycle equipment and its role in promoting cycling as a travel mode, City Cycling, Cambridge, MA, USA: MIT Press, 2012, pp. 75–104.
49. Lin, T.Y., Tseng, C.H., and Fong, Z.H., An experimental approach characterizing rear bicycle derailleur systems. Part II: The stability region and its applications, Int. J. Veh. Des., 1998, vol. 19, no. 3, pp. 371–384. https://doi.org/10.1504/IJVD.1998.06208310.1504/IJVD.1998.062083 ↗
50. Hadland, T. and Lessing, H., Bicycle Design: An Illustrated History, Cambridge, MA: MIT Press, 2014.